gjdwebserver-overlay/net-misc/modemmanager/files/temp_modemmanager_rpmsg.patch

435 lines
18 KiB
Diff
Raw Normal View History

2021-03-24 22:57:24 +01:00
From 482cfce46e1f8ec546499b782c2c2d96e6a9203e Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <stephan@gerhold.net>
Date: Sat, 21 Dec 2019 18:30:13 +0100
Subject: [PATCH] core: Add support for Qualcomm MSM/QMI modems via rpmsg
Most older Qualcomm SoCs (e.g. MSM8916, MSM8974, ...) communicate with
the integrated modem via shared memory (SMD channels). This is similar
to QRTR on newer SoCs, but without the "network" layer. In fact, the older
SoCs also have QRTR, but the modem QMI services are not exposed there.
The mainline Linux kernel exposes SMD channels via the "remote processor
messaging bus" (rpmsg). Through special IOCTL calls it is possible to
create a char device for a rpmsg/SMD channel. We can then use these to
send QMI/AT messages to the modem, much like the ordinary serial char
devices when using a Qualcomm modem through USB.
The QMI/AT messages needed to use the modem seem to be pretty much
the same as when using QMI via USB. We have tested on a few smartphones
with MSM8916 which are running a (close-to) mainline kernel, e.g.:
- BQ Aquaris X5
- Motorola Moto G4 Play
- Samsung Galaxy A3/A5 (2015)
- Wileyfox Swift
- Xiaomi Redmi 2
Most of the modem functionality seems to be working fine, without any
changes to the QMI/AT messages that are sent to the modem:
- Voice calls
- SMS
- Mobile Internet
- GPS (modem sends NMEA messages, so far we were unable to get a fix
for some reason...)
However, note that the implementation of voice call audio and network
interface is very different from the USB modems. It is completely
independent of the rpmsg channels that are used to control the modem.
I have written special drivers for:
- Voice call audio (q6voice) [1]
- Network interface (BAM DMUX) [2]
(Note: Newer SoCs use IPA (IP Accelerator) instead of BAM DMUX...)
I have plans to upstream these, but there is still some more work
needed (mostly fine tuning for some edge cases). This is independent of the
changes in ModemManager, because the additional drivers are only necessary
if you want to have audio/Internet actually working.
This commit adds support for probing rpmsg ports within ModemManager.
I think most of the changes are quite straightforward, but there are
some FIXME comments scattered over the code where I was not sure about
the best way to implement it. Those still need to be discussed :)
Note: This commit does not add the udev rules necessary to use rpmsg
modems with ModemManager. The reason for that is that you typically need
additional system services/tools and udev rules anyway for the modem to work.
Currently I'm using:
SYMLINK=="modem", SUBSYSTEM=="rpmsg", ENV{ID_MM_CANDIDATE}="1", ENV{ID_MM_DEVICE_PROCESS}="1", ENV{ID_MM_PORT_TYPE_QCDM}="1", ENV{ID_MM_PHYSDEV_UID}="qcom-rpmsg"
SYMLINK=="modem-at", SUBSYSTEM=="rpmsg", ENV{ID_MM_CANDIDATE}="1", ENV{ID_MM_DEVICE_PROCESS}="1", ENV{ID_MM_PHYSDEV_UID}="qcom-rpmsg"
ENV{INTERFACE}=="rmnet0", SUBSYSTEM=="net", ENV{ID_MM_CANDIDATE}="1", ENV{ID_MM_DEVICE_PROCESS}="1", ENV{ID_MM_PHYSDEV_UID}="qcom-rpmsg"
The purpose of `ENV{ID_MM_PHYSDEV_UID}` is to link the network interface
to the modem in ModemManager, since it isn't related to the rpmsg ports
in any way. Of course this is rather naive because there could be also
other network interfaces called `rmnet0`...
Also, the udev rules assume that we already have set up the rpmsg
char devices at /dev/modem (SMD channel `DATA5_CNTL`) and /dev/modem-at
(SMD channel `DATA4`). Those can be set up using rpmsgexport [3].
In postmarketOS [4], this is handled using additional udev rules, see [5].
[1]: https://github.com/msm8916-mainline/linux/commits/q6voice
[2]: https://github.com/msm8916-mainline/linux/commits/bam-dmux
[3]: https://github.com/andersson/rpmsgexport
[4]: https://postmarketos.org
[5]: https://gitlab.com/postmarketOS/pmaports/-/blob/master/modem/msm-modem/udev-rpmsg.rules
---
plugins/generic/mm-plugin-generic.c | 2 +-
src/mm-base-manager.c | 12 +++++--
src/mm-base-modem.c | 55 ++++++++++++++++++++++++-----
src/mm-broadband-modem-qmi.c | 12 ++++++-
src/mm-plugin.c | 19 ++++++++++
src/mm-port-probe.c | 24 ++++++++++---
src/mm-port-qmi.c | 7 ++--
src/mm-port-qmi.h | 2 +-
src/mm-port-serial-at.c | 3 +-
src/mm-port.h | 3 +-
10 files changed, 118 insertions(+), 21 deletions(-)
diff --git a/plugins/generic/mm-plugin-generic.c b/plugins/generic/mm-plugin-generic.c
index c2e3a07e..db4e3462 100644
--- a/plugins/generic/mm-plugin-generic.c
+++ b/plugins/generic/mm-plugin-generic.c
@@ -91,7 +91,7 @@ create_modem (MMPlugin *self,
G_MODULE_EXPORT MMPlugin *
mm_plugin_create (void)
{
- static const gchar *subsystems[] = { "tty", "net", "usb", NULL };
+ static const gchar *subsystems[] = { "tty", "net", "usb", "rpmsg", NULL };
return MM_PLUGIN (
g_object_new (MM_TYPE_PLUGIN_GENERIC,
diff --git a/src/mm-base-manager.c b/src/mm-base-manager.c
index 653adb5c..da2a3294 100644
--- a/src/mm-base-manager.c
+++ b/src/mm-base-manager.c
@@ -467,7 +467,8 @@ handle_uevent (GUdevClient *client,
/* A bit paranoid */
subsys = g_udev_device_get_subsystem (device);
g_return_if_fail (subsys != NULL);
- g_return_if_fail (g_str_equal (subsys, "tty") || g_str_equal (subsys, "net") || g_str_has_prefix (subsys, "usb"));
+ g_return_if_fail (g_str_equal (subsys, "tty") || g_str_equal (subsys, "net") ||
+ g_str_has_prefix (subsys, "usb") || g_str_equal (subsys, "rpmsg"));
kernel_device = mm_kernel_device_udev_new (device);
@@ -561,6 +562,13 @@ process_scan (MMBaseManager *self,
g_object_unref (G_OBJECT (iter->data));
}
g_list_free (devices);
+
+ devices = g_udev_client_query_by_subsystem (self->priv->udev, "rpmsg");
+ for (iter = devices; iter; iter = g_list_next (iter)) {
+ start_device_added (self, G_UDEV_DEVICE (iter->data), manual_scan);
+ g_object_unref (G_OBJECT (iter->data));
+ }
+ g_list_free (devices);
}
#endif
@@ -1448,7 +1456,7 @@ mm_base_manager_init (MMBaseManager *self)
#if defined WITH_UDEV
{
- const gchar *subsys[5] = { "tty", "net", "usb", "usbmisc", NULL };
+ const gchar *subsys[] = { "tty", "net", "usb", "usbmisc", "rpmsg", NULL };
/* Setup UDev client */
self->priv->udev = g_udev_client_new (subsys);
diff --git a/src/mm-base-modem.c b/src/mm-base-modem.c
index 0805cedb..e4aef11a 100644
--- a/src/mm-base-modem.c
+++ b/src/mm-base-modem.c
@@ -175,6 +175,7 @@ mm_base_modem_grab_port (MMBaseModem *self,
if (!g_str_equal (subsys, "net") &&
!g_str_equal (subsys, "tty") &&
!(g_str_has_prefix (subsys, "usb") && g_str_has_prefix (name, "cdc-wdm")) &&
+ !g_str_equal (subsys, "rpmsg") &&
!g_str_equal (subsys, "virtual")) {
g_set_error (error,
MM_CORE_ERROR,
@@ -297,7 +298,7 @@ mm_base_modem_grab_port (MMBaseModem *self,
g_str_has_prefix (name, "cdc-wdm")) {
#if defined WITH_QMI
if (ptype == MM_PORT_TYPE_QMI)
- port = MM_PORT (mm_port_qmi_new (name));
+ port = MM_PORT (mm_port_qmi_new (name, MM_PORT_SUBSYS_USB));
#endif
#if defined WITH_MBIM
if (!port && ptype == MM_PORT_TYPE_MBIM)
@@ -340,6 +341,36 @@ mm_base_modem_grab_port (MMBaseModem *self,
/* Store flags already */
mm_port_serial_at_set_flags (MM_PORT_SERIAL_AT (port), at_pflags);
}
+ /* rpmsg ports... */
+ else if (g_str_equal (subsys, "rpmsg")) {
+#if defined WITH_QMI
+ if (ptype == MM_PORT_TYPE_QMI)
+ port = MM_PORT (mm_port_qmi_new (name, MM_PORT_SUBSYS_RPMSG));
+#endif
+ /* Non-serial AT port */
+ if (!port && ptype == MM_PORT_TYPE_AT) {
+ port = MM_PORT (mm_port_serial_at_new (name, MM_PORT_SUBSYS_RPMSG));
+
+ /* Set common response parser */
+ mm_port_serial_at_set_response_parser (MM_PORT_SERIAL_AT (port),
+ mm_serial_parser_v1_parse,
+ mm_serial_parser_v1_new (),
+ mm_serial_parser_v1_destroy);
+ /* Store flags already */
+ mm_port_serial_at_set_flags (MM_PORT_SERIAL_AT (port), at_pflags);
+ }
+
+ if (!port) {
+ g_set_error (error,
+ MM_CORE_ERROR,
+ MM_CORE_ERROR_UNSUPPORTED,
+ "Cannot add port '%s/%s', unsupported",
+ subsys,
+ name);
+ g_free (key);
+ return FALSE;
+ }
+ }
else
/* We already filter out before all non-tty, non-net, non-cdc-wdm ports */
g_assert_not_reached ();
@@ -711,7 +742,17 @@ mm_base_modem_peek_port_qmi_for_data (MMBaseModem *self,
{
GList *cdc_wdm_qmi_ports, *l;
const gchar *net_port_parent_path;
- MMPortQmi *found = NULL;
+ MMPortQmi *found = NULL, *primary;
+
+ /* FIXME: For RPMSG modems the network interface is not related to the
+ * QMI device, they are managed through completely different subsystems.
+ * For now there should be just one QMI and one net port so we can just
+ * return the primary QMI port.
+ */
+ primary = mm_base_modem_peek_port_qmi (MM_BASE_MODEM (self));
+ if (primary && mm_port_get_subsys (MM_PORT (primary)) == MM_PORT_SUBSYS_RPMSG)
+ /* Assume there is just one QMI port */
+ return primary;
g_warn_if_fail (mm_port_get_subsys (data) == MM_PORT_SUBSYS_NET);
net_port_parent_path = mm_kernel_device_get_interface_sysfs_path (mm_port_peek_kernel_device (data));
@@ -1239,13 +1280,11 @@ mm_base_modem_organize_ports (MMBaseModem *self,
secondary = backup_primary ? backup_primary : backup_secondary;
#if defined WITH_QMI
- /* On QMI-based modems, we need to have at least a net port */
+ /* On QMI-based modems, a net port is required for broadband.
+ * However, all other functionality works without so just warn about this.
+ */
if (qmi_primary && !data_primary) {
- g_set_error_literal (error,
- MM_CORE_ERROR,
- MM_CORE_ERROR_FAILED,
- "Failed to find a net port in the QMI modem");
- return FALSE;
+ mm_obj_warn (self, "Failed to find a net port in the QMI modem");
}
#endif
diff --git a/src/mm-broadband-modem-qmi.c b/src/mm-broadband-modem-qmi.c
index 83e808c2..e641c401 100644
--- a/src/mm-broadband-modem-qmi.c
+++ b/src/mm-broadband-modem-qmi.c
@@ -9457,7 +9457,17 @@ initialization_started (MMBroadbandModem *self,
/* Now open our QMI port */
mm_port_qmi_open (ctx->qmi,
- TRUE,
+ /* FIXME: Parts of the "data format" functionality on libqmi
+ * assume that we are talking to qmi_wwan, which exposes the
+ * kernel data format through sysfs.
+ *
+ * For RPMSG modems the driver that manages the net port
+ * is a different one, and setting the kernel data format
+ * therefore eventually works differently there.
+ * For now skip setting the data format entirely for RPMSG
+ * to avoid a Segmentation Fault.
+ */
+ mm_port_get_subsys (MM_PORT (ctx->qmi)) != MM_PORT_SUBSYS_RPMSG,
NULL,
(GAsyncReadyCallback)qmi_port_open_ready,
task);
diff --git a/src/mm-plugin.c b/src/mm-plugin.c
index 77bd6528..f6bee411 100644
--- a/src/mm-plugin.c
+++ b/src/mm-plugin.c
@@ -773,6 +773,12 @@ mm_plugin_supports_port (MMPlugin *self,
/* Build flags depending on what probing needed */
probe_run_flags = MM_PORT_PROBE_NONE;
+ if (g_str_equal (mm_kernel_device_get_subsystem (port), "rpmsg")) {
+ if (self->priv->at)
+ probe_run_flags |= MM_PORT_PROBE_AT;
+ if (self->priv->qmi)
+ probe_run_flags |= MM_PORT_PROBE_QMI;
+ } else
if (!g_str_has_prefix (mm_kernel_device_get_name (port), "cdc-wdm")) {
/* Serial ports... */
if (self->priv->at)
@@ -958,6 +964,18 @@ mm_plugin_create_modem (MMPlugin *self,
}
#if defined WITH_QMI
+/* FIXME: For RPMSG modems the network interface usually won't be managed
+ * by the USB qmi_wwan driver so the check below prevents them from getting
+ * registered in ModemManager.
+ *
+ * I guess it should be just skipped in the RPMSG case. However, to detect that
+ * it seems like we would need to iterate another time over "port_probes"
+ * to see if the QMI port is provided by the RPMSG subsystem.
+ *
+ * I'm not sure if there is a simple way to detect this situation only based
+ * on the network device itself (which has nothing to do with RPMSG).
+ */
+#if 0
if (MM_IS_BROADBAND_MODEM_QMI (modem) &&
port_type == MM_PORT_TYPE_NET &&
g_strcmp0 (driver, "qmi_wwan") != 0) {
@@ -966,6 +984,7 @@ mm_plugin_create_modem (MMPlugin *self,
force_ignored = TRUE;
goto grab_port;
}
+#endif
if (!MM_IS_BROADBAND_MODEM_QMI (modem) &&
port_type == MM_PORT_TYPE_NET &&
diff --git a/src/mm-port-probe.c b/src/mm-port-probe.c
index 0c1edef1..b062f236 100644
--- a/src/mm-port-probe.c
+++ b/src/mm-port-probe.c
@@ -484,6 +484,9 @@ static void
wdm_probe_qmi (MMPortProbe *self)
{
PortProbeRunContext *ctx;
+#if defined WITH_QMI
+ MMPortSubsys subsys = MM_PORT_SUBSYS_USB;
+#endif
g_assert (self->priv->task);
ctx = g_task_get_task_data (self->priv->task);
@@ -491,8 +494,11 @@ wdm_probe_qmi (MMPortProbe *self)
#if defined WITH_QMI
mm_obj_dbg (self, "probing QMI...");
+ if (g_str_equal (mm_kernel_device_get_subsystem (self->priv->port), "rpmsg"))
+ subsys = MM_PORT_SUBSYS_RPMSG;
+
/* Create a port and try to open it */
- ctx->port_qmi = mm_port_qmi_new (mm_kernel_device_get_name (self->priv->port));
+ ctx->port_qmi = mm_port_qmi_new (mm_kernel_device_get_name (self->priv->port), subsys);
mm_port_qmi_open (ctx->port_qmi,
FALSE,
NULL,
@@ -1269,6 +1275,8 @@ serial_open_at (MMPortProbe *self)
if (g_str_has_prefix (mm_kernel_device_get_subsystem (self->priv->port), "usb"))
subsys = MM_PORT_SUBSYS_USB;
+ if (g_str_equal (mm_kernel_device_get_subsystem (self->priv->port), "rpmsg"))
+ subsys = MM_PORT_SUBSYS_RPMSG;
ctx->serial = MM_PORT_SERIAL (mm_port_serial_at_new (mm_kernel_device_get_name (self->priv->port), subsys));
if (!ctx->serial) {
@@ -1570,9 +1578,10 @@ mm_port_probe_is_qmi (MMPortProbe *self)
subsys = mm_kernel_device_get_subsystem (self->priv->port);
name = mm_kernel_device_get_name (self->priv->port);
- if (!g_str_has_prefix (subsys, "usb") ||
- !name ||
- !g_str_has_prefix (name, "cdc-wdm"))
+ if ((!g_str_has_prefix (subsys, "usb") ||
+ !name ||
+ !g_str_has_prefix (name, "cdc-wdm")) &&
+ !g_str_equal (subsys, "rpmsg"))
return FALSE;
return self->priv->is_qmi;
@@ -1656,6 +1665,13 @@ mm_port_probe_get_port_type (MMPortProbe *self)
}
}
+ if (g_str_equal (subsys, "rpmsg")) {
+#if defined WITH_QMI
+ if (self->priv->is_qmi)
+ return MM_PORT_TYPE_QMI;
+#endif
+ }
+
if (self->priv->flags & MM_PORT_PROBE_QCDM &&
self->priv->is_qcdm)
return MM_PORT_TYPE_QCDM;
diff --git a/src/mm-port-qmi.c b/src/mm-port-qmi.c
index 83d92b9d..0c4a4a98 100644
--- a/src/mm-port-qmi.c
+++ b/src/mm-port-qmi.c
@@ -788,11 +788,14 @@ mm_port_qmi_close (MMPortQmi *self,
/*****************************************************************************/
MMPortQmi *
-mm_port_qmi_new (const gchar *name)
+mm_port_qmi_new (const gchar *name, MMPortSubsys subsys)
{
+ g_return_val_if_fail (subsys == MM_PORT_SUBSYS_USB ||
+ subsys == MM_PORT_SUBSYS_RPMSG, NULL);
+
return MM_PORT_QMI (g_object_new (MM_TYPE_PORT_QMI,
MM_PORT_DEVICE, name,
- MM_PORT_SUBSYS, MM_PORT_SUBSYS_USB,
+ MM_PORT_SUBSYS, subsys,
MM_PORT_TYPE, MM_PORT_TYPE_QMI,
NULL));
}
diff --git a/src/mm-port-qmi.h b/src/mm-port-qmi.h
index b4e8460c..6a5c298a 100644
--- a/src/mm-port-qmi.h
+++ b/src/mm-port-qmi.h
@@ -46,7 +46,7 @@ struct _MMPortQmiClass {
GType mm_port_qmi_get_type (void);
-MMPortQmi *mm_port_qmi_new (const gchar *name);
+MMPortQmi *mm_port_qmi_new (const gchar *name, MMPortSubsys subsys);
void mm_port_qmi_open (MMPortQmi *self,
gboolean set_data_format,
diff --git a/src/mm-port-serial-at.c b/src/mm-port-serial-at.c
index c8e4782f..11a086ed 100644
--- a/src/mm-port-serial-at.c
+++ b/src/mm-port-serial-at.c
@@ -532,7 +532,8 @@ mm_port_serial_at_new (const char *name,
{
g_return_val_if_fail (subsys == MM_PORT_SUBSYS_TTY ||
subsys == MM_PORT_SUBSYS_USB ||
- subsys == MM_PORT_SUBSYS_UNIX, NULL);
+ subsys == MM_PORT_SUBSYS_UNIX ||
+ subsys == MM_PORT_SUBSYS_RPMSG, NULL);
return MM_PORT_SERIAL_AT (g_object_new (MM_TYPE_PORT_SERIAL_AT,
MM_PORT_DEVICE, name,
diff --git a/src/mm-port.h b/src/mm-port.h
index 33b07d97..861a086b 100644
--- a/src/mm-port.h
+++ b/src/mm-port.h
@@ -28,8 +28,9 @@ typedef enum { /*< underscore_name=mm_port_subsys >*/
MM_PORT_SUBSYS_NET,
MM_PORT_SUBSYS_USB,
MM_PORT_SUBSYS_UNIX,
+ MM_PORT_SUBSYS_RPMSG,
- MM_PORT_SUBSYS_LAST = MM_PORT_SUBSYS_UNIX /*< skip >*/
+ MM_PORT_SUBSYS_LAST = MM_PORT_SUBSYS_RPMSG /*< skip >*/
} MMPortSubsys;
typedef enum { /*< underscore_name=mm_port_type >*/
--
2.28.0