This commit is contained in:
Gerben Jan Dijkman 2021-07-01 11:08:59 +02:00
parent 2f7df5e7c7
commit 3526116b43
10 changed files with 148 additions and 1692 deletions

View File

@ -30,15 +30,20 @@ DEPEND="
RDEPEND="${DEPEND}" RDEPEND="${DEPEND}"
PATCHES=( PATCHES=(
${FILESDIR}/18.patch # ${FILESDIR}/11.patch
${FILESDIR}/15.patch # ${FILESDIR}/12.patch
) )
src_install() { src_install() {
meson_src_install meson_src_install
systemd_dounit "${FILESDIR}"/eg25-manager.service systemd_dounit "${FILESDIR}"/eg25-manager.service
insinto /etc/eg25-manager
newins "${FILESDIR}"/eg25-pinephone-1.0.toml pine64,pinephone-1.0.toml
newins "${FILESDIR}"/eg25-pinephone-1.1.toml pine64,pinephone-1.1.toml
newins "${FILESDIR}"/eg25-pinephone-1.2.toml pine64,pinephone-1.2.toml
} }
pkg_postinst() { pkg_postinst() {
systemd_reenable --all eg25-manager systemd_reenable --all eg25-manager
} }

File diff suppressed because it is too large Load Diff

View File

@ -1,28 +0,0 @@
From 705950bb399781a291a3998014f916fc1effce16 Mon Sep 17 00:00:00 2001
From: Bhushan Shah <bhush94@gmail.com>
Date: Thu, 15 Apr 2021 09:29:36 +0530
Subject: [PATCH] mm-iface: clean out modem_iface if mm disappears
otherwise we will be stuck in state where restarting of mm will not
reset the modem_iface and it will loop through hard resetting modem
---
src/mm-iface.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/src/mm-iface.c b/src/mm-iface.c
index d6a74f8..0409236 100644
--- a/src/mm-iface.c
+++ b/src/mm-iface.c
@@ -183,6 +183,9 @@ static void mm_iface_clean(struct EG25Manager *manager)
g_free(manager->modem_usb_id);
manager->modem_usb_id = NULL;
}
+ if (manager->modem_iface == MODEM_IFACE_MODEMMANAGER) {
+ manager->modem_iface = MODEM_IFACE_NONE;
+ }
}
static void mm_vanished_cb(GDBusConnection *connection,
--
GitLab

View File

@ -1,101 +0,0 @@
diff --git a/data/pine64,pinephone-1.0.toml b/data/pine64,pinephone-1.0.toml
index e127f1a..5269fc2 100644
--- a/data/pine64,pinephone-1.0.toml
+++ b/data/pine64,pinephone-1.0.toml
@@ -39,8 +39,8 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
- { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
- { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QSCLK", value = "1" },
@@ -62,6 +62,15 @@ configure = [
{ cmd = "QGPSCFG", subcmd = "galileonmeatype", expect = "0" },
{ cmd = "QGPSCFG", subcmd = "beidounmeatype", expect = "0" },
{ cmd = "QGPSCFG", subcmd = "autogps", expect = "0" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
]
suspend = [
]
diff --git a/data/pine64,pinephone-1.1.toml b/data/pine64,pinephone-1.1.toml
index e127f1a..c2ee8bd 100644
--- a/data/pine64,pinephone-1.1.toml
+++ b/data/pine64,pinephone-1.1.toml
@@ -39,11 +39,20 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
- { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
- { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QSCLK", value = "1" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
# GNSS configuration:
# * Enable A-GPS data upload support (XTRA)
# * Disable On-Demand-Positioning (ODP) mode
diff --git a/data/pine64,pinephone-1.2.toml b/data/pine64,pinephone-1.2.toml
index e16f4f5..a45c7ec 100644
--- a/data/pine64,pinephone-1.2.toml
+++ b/data/pine64,pinephone-1.2.toml
@@ -36,8 +36,20 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
+ { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",120,1000,5000,\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",120,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
+ { cmd = "QCFG", subcmd = "urc/delay", expect = "0" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QSCLK", value = "1" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
# GNSS configuration:
# * Enable A-GPS data upload support (XTRA)
# * Disable On-Demand-Positioning (ODP) mode
diff --git a/src/at.c b/src/at.c
index f694507..7c5f092 100644
--- a/src/at.c
+++ b/src/at.c
@@ -222,7 +222,12 @@ static gboolean modem_response(gint fd,
else if (strstr(response, "QGPSURC: \"xtradataexpire\""))
gnss_upload_assistance_data(manager);
/* AT command failed, retry */
- else if (strstr(response, "ERROR"))
+ /*
+ * QCFG="fast/poweroff" configuration is only available in
+ * newer firmware versions
+ */
+ else if (strstr(response, "ERROR") && !strstr(response, "fast/poweroff"))
+
retry_at_command(manager);
/*
* Successfull AT responses contain 'OK', except for AT+QFUPL which also

View File

@ -1,129 +0,0 @@
From a046b539418958eeb2ee26ec5ef273835c98d0d2 Mon Sep 17 00:00:00 2001
From: Dylan Van Assche <me@dylanvanassche.be>
Date: Thu, 15 Apr 2021 20:11:03 +0200
Subject: [PATCH 1/2] config: synchronize with modem-power
We cannot assume default factory values if other drivers change them
---
data/pine64,pinephone-1.0.toml | 13 +++++++++++--
data/pine64,pinephone-1.1.toml | 13 +++++++++++--
data/pine64,pinephone-1.2.toml | 12 ++++++++++++
3 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/data/pine64,pinephone-1.0.toml b/data/pine64,pinephone-1.0.toml
index e1f5b24..6e21bda 100644
--- a/data/pine64,pinephone-1.0.toml
+++ b/data/pine64,pinephone-1.0.toml
@@ -39,12 +39,21 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
- { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
- { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QGPS", value = "1" },
{ cmd = "QSCLK", value = "1" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
]
suspend = [
{ cmd = "QGPSEND" },
diff --git a/data/pine64,pinephone-1.1.toml b/data/pine64,pinephone-1.1.toml
index e1f5b24..6e21bda 100644
--- a/data/pine64,pinephone-1.1.toml
+++ b/data/pine64,pinephone-1.1.toml
@@ -39,12 +39,21 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
- { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
- { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QGPS", value = "1" },
{ cmd = "QSCLK", value = "1" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "apready", expect = "0,0,500" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
]
suspend = [
{ cmd = "QGPSEND" },
diff --git a/data/pine64,pinephone-1.2.toml b/data/pine64,pinephone-1.2.toml
index 4ca1274..598ebaf 100644
--- a/data/pine64,pinephone-1.2.toml
+++ b/data/pine64,pinephone-1.2.toml
@@ -36,9 +36,21 @@ configure = [
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
+ { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",120,1000,5000,\"off\",1" },
+ { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",120,1" },
+ { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1,1" },
+ { cmd = "QCFG", subcmd = "urc/delay", expect = "0" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"all\"" },
{ cmd = "QGPS", value = "1" },
{ cmd = "QSCLK", value = "1" },
+# Reset modem-power configurations to what we expect
+ { cmd = "QCFG", subcmd = "urc/cache", expect = "0" },
+ { cmd = "QCFG", subcmd = "fast/poweroff", expect = "1" },
+ { cmd = "QCFG", subcmd = "sleepind/level", expect = "0" },
+ { cmd = "QCFG", subcmd = "wakeupin/level", expect = "0,0" },
+ { cmd = "QCFG", subcmd = "ApRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "ModemRstLevel", expect = "0" },
+ { cmd = "QCFG", subcmd = "urc/ri/pin", expect = "uart_ri" },
]
suspend = [
{ cmd = "QGPSEND" },
--
GitLab
From 0094dea49d8bc5a60c044da1e01417c29397c7b0 Mon Sep 17 00:00:00 2001
From: Dylan Van Assche <me@dylanvanassche.be>
Date: Sat, 17 Apr 2021 15:50:07 +0200
Subject: [PATCH 2/2] at: fast/poweroff is only available in newer firmware
versions
Do not retry the AT command of the fast/poweroff setting as it may not be supported by the firmware
---
src/at.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/src/at.c b/src/at.c
index a34025f..4469d26 100644
--- a/src/at.c
+++ b/src/at.c
@@ -215,7 +215,11 @@ static gboolean modem_response(gint fd,
suspend_inhibit(manager, TRUE, TRUE);
manager->modem_state = EG25_STATE_STARTED;
}
- else if (strstr(response, "ERROR"))
+ /*
+ * QCFG="fast/poweroff" configuration is only available in
+ * newer firmware versions
+ */
+ else if (strstr(response, "ERROR") && !strstr(response, "fast/poweroff"))
retry_at_command(manager);
else if (strstr(response, "OK"))
process_at_result(manager, response);
--
GitLab

View File

@ -1,152 +0,0 @@
From e690e2a17d9798ad22d961bd4ee2613593d68e44 Mon Sep 17 00:00:00 2001
From: Dylan Van Assche <me@dylanvanassche.be>
Date: Sun, 23 May 2021 20:00:42 +0200
Subject: [PATCH] at: wake only when sending AT commands
Allow the modem to enter soft sleep when
we don't talk to the modem using AT commands.
This was already the case in suspend, but
not during runtime. By only waking the modem
from soft sleep when we need to send
an AT command, we can save some power.
---
src/at.c | 36 +++++++++++++++++++++++-------------
src/gpio.c | 24 ++++++++++++++++++++++--
src/gpio.h | 2 ++
3 files changed, 47 insertions(+), 15 deletions(-)
diff --git a/src/at.c b/src/at.c
index a34025f..358d95a 100644
--- a/src/at.c
+++ b/src/at.c
@@ -6,6 +6,7 @@
#include "at.h"
#include "suspend.h"
+#include "gpio.h"
#include "gnss.h"
#include <fcntl.h>
@@ -52,6 +53,10 @@ gboolean at_send_command(struct EG25Mana
int ret, len = 0;
if (at_cmd) {
+ /* Wake up the modem from soft sleep before sending an AT command */
+ gpio_sequence_wake(manager);
+
+ /* Send AT command */
if (at_cmd->subcmd == NULL && at_cmd->value == NULL && at_cmd->expected == NULL)
len = sprintf(command, "AT+%s\r\n", at_cmd->cmd);
else if (at_cmd->subcmd == NULL && at_cmd->value == NULL)
@@ -69,23 +74,28 @@ gboolean at_send_command(struct EG25Mana
g_warning("Couldn't write full AT command: wrote %d/%d bytes", ret, len);
g_message("Sending command: %s", g_strstrip(command));
- } else if (manager->modem_state < EG25_STATE_CONFIGURED) {
- if (manager->modem_iface == MODEM_IFACE_MODEMMANAGER) {
+ } else {
+ /* Allow the modem to enter soft sleep again when we sent the AT command*/
+ gpio_sequence_sleep(manager);
+
+ if (manager->modem_state < EG25_STATE_CONFIGURED) {
+ if (manager->modem_iface == MODEM_IFACE_MODEMMANAGER) {
#ifdef HAVE_MMGLIB
- MMModemState modem_state = mm_modem_get_state(manager->mm_modem);
+ MMModemState modem_state = mm_modem_get_state(manager->mm_modem);
- if (manager->mm_modem && modem_state >= MM_MODEM_STATE_REGISTERED)
- modem_update_state(manager, modem_state);
- else
- manager->modem_state = EG25_STATE_CONFIGURED;
+ if (manager->mm_modem && modem_state >= MM_MODEM_STATE_REGISTERED)
+ modem_update_state(manager, modem_state);
+ else
+ manager->modem_state = EG25_STATE_CONFIGURED;
#endif
- } else {
- manager->modem_state = EG25_STATE_CONFIGURED;
+ } else {
+ manager->modem_state = EG25_STATE_CONFIGURED;
+ }
+ } else if (manager->modem_state == EG25_STATE_SUSPENDING) {
+ modem_suspend_post(manager);
+ } else if (manager->modem_state == EG25_STATE_RESETTING) {
+ manager->modem_state = EG25_STATE_POWERED;
}
- } else if (manager->modem_state == EG25_STATE_SUSPENDING) {
- modem_suspend_post(manager);
- } else if (manager->modem_state == EG25_STATE_RESETTING) {
- manager->modem_state = EG25_STATE_POWERED;
}
return FALSE;
diff --git a/src/gpio.c b/src/gpio.c
index a5d3bf0..617b69e 100644
--- a/src/gpio.c
+++ b/src/gpio.c
@@ -6,6 +6,8 @@
#include "gpio.h"
+#include <unistd.h>
+
#define GPIO_CHIP1_LABEL "1c20800.pinctrl"
#define GPIO_CHIP2_LABEL "1f02c00.pinctrl"
@@ -52,7 +54,6 @@ int gpio_sequence_shutdown(struct EG25Manager *manager)
int gpio_sequence_suspend(struct EG25Manager *manager)
{
gpiod_line_set_value(manager->gpio_out[GPIO_OUT_APREADY], 1);
- gpiod_line_set_value(manager->gpio_out[GPIO_OUT_DTR], 1);
g_message("Executed suspend sequence");
@@ -62,13 +63,32 @@ int gpio_sequence_suspend(struct EG25Manager *manager)
int gpio_sequence_resume(struct EG25Manager *manager)
{
gpiod_line_set_value(manager->gpio_out[GPIO_OUT_APREADY], 0);
- gpiod_line_set_value(manager->gpio_out[GPIO_OUT_DTR], 0);
g_message("Executed resume sequence");
return 0;
}
+int gpio_sequence_wake(struct EG25Manager *manager)
+{
+ gpiod_line_set_value(manager->gpio_out[GPIO_OUT_DTR], 0);
+
+ /* Give the modem 5ms to wake from soft sleep */
+ usleep(5000);
+
+ g_message("Executed soft wake sequence");
+
+ return 0;
+}
+
+int gpio_sequence_sleep(struct EG25Manager *manager)
+{
+ gpiod_line_set_value(manager->gpio_out[GPIO_OUT_DTR], 1);
+ g_message("Executed soft sleep sequence");
+
+ return 0;
+}
+
static guint get_config_gpio(toml_table_t *config, const char *id)
{
toml_datum_t value = toml_int_in(config, id);
diff --git a/src/gpio.h b/src/gpio.h
index 8d94013..a041bdc 100644
--- a/src/gpio.h
+++ b/src/gpio.h
@@ -15,5 +15,7 @@ int gpio_sequence_poweron(struct EG25Manager *state);
int gpio_sequence_shutdown(struct EG25Manager *state);
int gpio_sequence_suspend(struct EG25Manager *state);
int gpio_sequence_resume(struct EG25Manager *state);
+int gpio_sequence_wake(struct EG25Manager *state);
+int gpio_sequence_sleep(struct EG25Manager *state);
gboolean gpio_check_poweroff(struct EG25Manager *manager, gboolean keep_down);
--
GitLab

View File

@ -6,24 +6,6 @@ Before=ModemManager.service
Type=simple Type=simple
ExecStart=/usr/bin/eg25manager ExecStart=/usr/bin/eg25manager
Restart=on-failure Restart=on-failure
ProtectControlGroups=true
ProtectHome=true
ProtectKernelTunables=true
ProtectSystem=strict
RestrictSUIDSGID=true
PrivateTmp=true
ProtectedKernelModules=true
MemoryDenyWriteExecute=true
PrivateMounts=true
NoNewPrivileges=true
CapabilityBoundingSet=
ProtectProc=true
ProtectDevices=true
DeviceAllow=/dev/ttyS2
LockPersonality=true
PrivateNetwork=true
ProtectClock=true
ProtectKernelLog=true
[Install] [Install]
WantedBy=multi-user.target WantedBy=multi-user.target

View File

@ -0,0 +1,49 @@
[manager]
need_libusb = true
usb_vid = 0x2c7c
usb_pid = 0x0125
# Uncomment the following if you need to change the modem detection timeout on
# resume and/or the time during which suspend is blocked after modem boot
#[suspend]
#boot_timeout = 120
#recovery_timeout = 9
[gpio]
dtr = 358
pwrkey = 35
reset = 68
apready = 231
disable = 232
[at]
uart = "/dev/ttyS2"
configure = [
# Each command has 4 possible elements:
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
# * `subcmd`: the subcommand in case a single AT command can be used
# to change multiple parameters, such as QCFG (optional)
# * `value` : the commands, argument, usually used to set the value of
# a specific parameter (optional)
# * `expect`: the expected return value; the command is first executed
# without any value in order to query the current state. This
# state is then compared to the `expect` string; if they don't
# match, the command is then executed with value `expect` in
# order to set the parameter to the configured value (optional)
# A command can have `expect` OR `value` configured, but it shouldn't have both
{ cmd = "QGMR" },
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
{ cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
{ cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
{ cmd = "QSCLK", value = "1" },
]
suspend = [
]
resume = [
]
reset = [ { cmd = "CFUN", value = "1,1" } ]

View File

@ -0,0 +1,50 @@
[manager]
need_libusb = true
usb_vid = 0x2c7c
usb_pid = 0x0125
# Uncomment the following if you need to change the modem detection timeout on
# resume and/or the time during which suspend is blocked after modem boot
#[suspend]
#boot_timeout = 120
#recovery_timeout = 9
[gpio]
dtr = 358
pwrkey = 35
reset = 68
apready = 231
disable = 232
[at]
uart = "/dev/ttyS2"
configure = [
# Each command has 4 possible elements:
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
# * `subcmd`: the subcommand in case a single AT command can be used
# to change multiple parameters, such as QCFG (optional)
# * `value` : the commands, argument, usually used to set the value of
# a specific parameter (optional)
# * `expect`: the expected return value; the command is first executed
# without any value in order to query the current state. This
# state is then compared to the `expect` string; if they don't
# match, the command is then executed with value `expect` in
# order to set the parameter to the configured value (optional)
# A command can have `expect` OR `value` configured, but it shouldn't have both
{ cmd = "QGMR" },
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
{ cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
{ cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
{ cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
{ cmd = "QSCLK", value = "1" },
]
suspend = [
]
resume = [
]
reset = [ { cmd = "CFUN", value = "1,1" } ]

View File

@ -0,0 +1,42 @@
# Uncomment the following if you need to change the modem detection timeout on
# resume and/or the time during which suspend is blocked after modem boot
#[suspend]
#boot_timeout = 120
#recovery_timeout = 9
[gpio]
dtr = 34
pwrkey = 35
reset = 68
apready = 231
disable = 232
status = 233
[at]
uart = "/dev/ttyS2"
configure = [
# Each command has 4 possible elements:
# * `cmd` : the AT command itself, which will be translated to "AT+`cmd`"
# * `subcmd`: the subcommand in case a single AT command can be used
# to change multiple parameters, such as QCFG (optional)
# * `value` : the commands, argument, usually used to set the value of
# a specific parameter (optional)
# * `expect`: the expected return value; the command is first executed
# without any value in order to query the current state. This
# state is then compared to the `expect` string; if they don't
# match, the command is then executed with value `expect` in
# order to set the parameter to the configured value (optional)
# A command can have `expect` OR `value` configured, but it shouldn't have both
{ cmd = "QGMR" },
{ cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
{ cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
{ cmd = "QCFG", subcmd = "ims", expect = "1" },
{ cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
{ cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
{ cmd = "QSCLK", value = "1" },
]
suspend = [
]
resume = [
]
reset = [ { cmd = "CFUN", value = "1,1" } ]