Changed patches

2022-07-11 15:09:59 +02:00 · 2022-07-11 15:09:59 +02:00 · 39495f4fe2
commit 39495f4fe2
parent d1e1bd1a15
16 changed files with 1398 additions and 869 deletions
--- a/dev-embedded/u-boot-pinephone-pro/files/1001-Correct-boot-order-to-be-USB-SD-eMMC.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1001-Correct-boot-order-to-be-USB-SD-eMMC.patch
@ -0,0 +1,29 @@
 From f97401137daa1cb75532c373bbcb5011f1e03585 Mon Sep 17 00:00:00 2001
 From: Dan Johansen <strit@manjaro.org>
 Date: Sun, 10 Oct 2021 20:19:02 +0200
 Subject: [PATCH] Correct boot order to be USB -> SD -> eMMC
 Signed-off-by: Dan Johansen <strit@manjaro.org>
 ---
 include/configs/rockchip-common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
 index ba7061a287..5dc92373b2 100644
 --- a/include/configs/rockchip-common.h
 +++ b/include/configs/rockchip-common.h
@@ -61,10 +61,10 @@
 #ifdef CONFIG_ROCKCHIP_RK3399
 #define BOOT_TARGET_DEVICES(func) \
 +	BOOT_TARGET_USB(func) \
 	BOOT_TARGET_MMC(func) \
 	BOOT_TARGET_NVME(func) \
 	BOOT_TARGET_SCSI(func) \
 -	BOOT_TARGET_USB(func) \
 	BOOT_TARGET_PXE(func) \
 	BOOT_TARGET_DHCP(func) \
 	BOOT_TARGET_SF(func)
 -- 
 2.33.0
--- a/dev-embedded/u-boot-pinephone-pro/files/1001-pinephone-Add-volume_key-environment-variable.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1001-pinephone-Add-volume_key-environment-variable.patch
@ -1,177 +0,0 @@
 From 0612580e68fa584d415f8080f65da2d4873664fe Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Tue, 11 Feb 2020 14:10:05 +0100
 Subject: [PATCH 23/29] pinephone: Add volume_key environment variable
 When the user has a volume key pressed volume_key variable will
 contain either value 'down' or 'up', otherwise it will be empty.
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 board/sunxi/Makefile |  1 +
 board/sunxi/board.c  | 18 ++++++++++
 board/sunxi/lradc.c  | 81 ++++++++++++++++++++++++++++++++++++++++++++
 board/sunxi/lradc.h  | 11 ++++++
 4 files changed, 111 insertions(+)
 create mode 100644 board/sunxi/lradc.c
 create mode 100644 board/sunxi/lradc.h
 diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
 index d96b7897..a096a5c7 100644
 --- a/board/sunxi/Makefile
 +++ b/board/sunxi/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
 obj-$(CONFIG_MACH_SUN5I)	+= dram_sun5i_auto.o
 obj-$(CONFIG_MACH_SUN7I)	+= dram_sun5i_auto.o
 obj-$(CONFIG_CHIP_DIP_SCAN)	+= chip.o
 +obj-$(CONFIG_MACH_SUN50I)	+= lradc.o
 diff --git a/board/sunxi/board.c b/board/sunxi/board.c
 index 2790a0f9..50344342 100644
 --- a/board/sunxi/board.c
 +++ b/board/sunxi/board.c
@@ -46,6 +46,7 @@
 #include <spl.h>
 #include <sy8106a.h>
 #include <asm/setup.h>
 +#include "lradc.h"
 #include <status_led.h>
 DECLARE_GLOBAL_DATA_PTR;
@@ -588,6 +589,12 @@ void sunxi_board_init(void)
 {
 	int power_failed = 0;
 +#ifdef CONFIG_MACH_SUN50I
 +	// we init the lradc in SPL to get the ADC started early to have
 +	// a valid sample when U-Boot main binary gets executed.
 +	lradc_enable();
 +#endif
 +
 #ifdef CONFIG_LED_STATUS
 	if (IS_ENABLED(CONFIG_SPL_DRIVERS_MISC))
 		status_led_init();
@@ -861,6 +868,17 @@ int misc_init_r(void)
 		env_set("fdtfile", str);
 	}
 +#ifdef CONFIG_MACH_SUN50I
 +	int key = lradc_get_pressed_key();
 +	if (key == KEY_VOLUMEDOWN)
 +		env_set("volume_key", "down");
 +	else if (key == KEY_VOLUMEUP)
 +		env_set("volume_key", "up");
 +
 +	// no longer needed
 +	lradc_disable();
 +#endif
 +
 	setup_environment(gd->fdt_blob);
 	return 0;
 diff --git a/board/sunxi/lradc.c b/board/sunxi/lradc.c
 new file mode 100644
 index 00000000..693b198e
 --- /dev/null
 +++ b/board/sunxi/lradc.c
@@ -0,0 +1,81 @@
 +#include <common.h>
 +#include <asm/io.h>
 +#include "lradc.h"
 +
 +#define LRADC_BASE		0x1c21800
 +
 +#define LRADC_CTRL		(LRADC_BASE + 0x00)
 +#define LRADC_INTC		(LRADC_BASE + 0x04)
 +#define LRADC_INTS		(LRADC_BASE + 0x08)
 +#define LRADC_DATA0		(LRADC_BASE + 0x0c)
 +#define LRADC_DATA1		(LRADC_BASE + 0x10)
 +
 +/* LRADC_CTRL bits */
 +#define FIRST_CONVERT_DLY(x)	((x) << 24) /* 8 bits */
 +#define CHAN_SELECT(x)		((x) << 22) /* 2 bits */
 +#define CONTINUE_TIME_SEL(x)	((x) << 16) /* 4 bits */
 +#define KEY_MODE_SEL(x)		((x) << 12) /* 2 bits */
 +#define LEVELA_B_CNT(x)		((x) << 8)  /* 4 bits */
 +#define HOLD_KEY_EN(x)		((x) << 7)
 +#define HOLD_EN(x)		((x) << 6)
 +#define LEVELB_VOL(x)		((x) << 4)  /* 2 bits */
 +#define SAMPLE_RATE(x)		((x) << 2)  /* 2 bits */
 +#define ENABLE(x)		((x) << 0)
 +
 +/* LRADC_INTC and LRADC_INTS bits */
 +#define CHAN1_KEYUP_IRQ		BIT(12)
 +#define CHAN1_ALRDY_HOLD_IRQ	BIT(11)
 +#define CHAN1_HOLD_IRQ		BIT(10)
 +#define	CHAN1_KEYDOWN_IRQ	BIT(9)
 +#define CHAN1_DATA_IRQ		BIT(8)
 +#define CHAN0_KEYUP_IRQ		BIT(4)
 +#define CHAN0_ALRDY_HOLD_IRQ	BIT(3)
 +#define CHAN0_HOLD_IRQ		BIT(2)
 +#define	CHAN0_KEYDOWN_IRQ	BIT(1)
 +#define CHAN0_DATA_IRQ		BIT(0)
 +
 +// this is for PinePhone only
 +
 +int lradc_get_pressed_key(void)
 +{
 +	uint32_t val;
 +	uint32_t vref = 3000000 * 2 / 3;
 +
 +	val = readl(LRADC_DATA0) & 0x3f;
 +	val = val * vref / 63;
 +
 +//	printf("lradc=%u\n", val);
 +
 +	if (val < 200000) // 158730
 +		return KEY_VOLUMEUP;
 +	else if (val < 400000) // 349206
 +		return KEY_VOLUMEDOWN;
 +
 +	return 0;
 +}
 +
 +void lradc_enable(void)
 +{
 +	// aldo3 is always on and defaults to 3V
 +
 +	writel(0xffffffff, LRADC_INTS);
 +	writel(0, LRADC_INTC);
 +
 +	/*
 +	 * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
 +	 * stabilize on press, wait (1 + 1) * 4 ms for key release
 +	 */
 +	writel(FIRST_CONVERT_DLY(0) | LEVELA_B_CNT(0) | HOLD_EN(0) |
 +		SAMPLE_RATE(0) | ENABLE(1), LRADC_CTRL);
 +
 +}
 +
 +void lradc_disable(void)
 +{
 +	writel(0xffffffff, LRADC_INTS);
 +	writel(0, LRADC_INTC);
 +
 +	/* Disable lradc, leave other settings unchanged */
 +	writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
 +		SAMPLE_RATE(2), LRADC_CTRL);
 +}
 diff --git a/board/sunxi/lradc.h b/board/sunxi/lradc.h
 new file mode 100644
 index 00000000..c908401b
 --- /dev/null
 +++ b/board/sunxi/lradc.h
@@ -0,0 +1,11 @@
 +#pragma once
 +
 +enum {
 +	KEY_NONE = 0,
 +	KEY_VOLUMEDOWN = 1,
 +	KEY_VOLUMEUP = 2,
 +};
 +
 +int lradc_get_pressed_key(void);
 +void lradc_enable(void);
 +void lradc_disable(void);
 -- 
 2.34.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1002-Enable-led-on-boot-to-notify-user-of-boot-status.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1002-Enable-led-on-boot-to-notify-user-of-boot-status.patch
@ -1,58 +0,0 @@
 From bbb3d10356bcbf931a63a70610f1e7869eeebd21 Mon Sep 17 00:00:00 2001
 From: Marius Gripsgard <marius@ubports.com>
 Date: Tue, 5 May 2020 16:51:13 +0200
 Subject: [PATCH 24/29] Enable led on boot to notify user of boot status
 ---
 arch/arm/mach-sunxi/Kconfig | 5 +++++
 board/sunxi/board.c         | 6 ++++++
 configs/pinephone_defconfig | 1 +
 3 files changed, 12 insertions(+)
 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
 index b0191d0080..7a46bb4481 100644
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,10 @@
 if ARCH_SUNXI
 +config PINEPHONE_LEDS
 +	bool "Notify boot status via LEDs on PinePhone"
 +	---help---
 +	LED boot notification.
 +
 config SPL_LDSCRIPT
 	default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64
 diff --git a/board/sunxi/board.c b/board/sunxi/board.c
 index 2bc9883092..59f7c2c5f1 100644
 --- a/board/sunxi/board.c
 +++ b/board/sunxi/board.c
@@ -666,6 +666,12 @@ void sunxi_board_init(void)
 	lradc_enable();
 #endif
 +#ifdef CONFIG_PINEPHONE_LEDS
 +	/* PD18:G PD19:R PD20:B */
 +	gpio_request(SUNXI_GPD(19), "led:red");
 +	gpio_direction_output(SUNXI_GPD(19), 1);
 +#endif
 +
 #ifdef CONFIG_SY8106A_POWER
 	power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
 #endif
 diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
 index 64ecef59c9..623265d719 100644
 --- a/configs/pinephone_defconfig
 +++ b/configs/pinephone_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SPL=y
 +CONFIG_PINEPHONE_LEDS=y
 CONFIG_MACH_SUN50I=y
 CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
 CONFIG_DRAM_CLK=552
 -- 
 2.31.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1002-rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1002-rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
@ -0,0 +1,889 @@
 From eea38c80ff858222e15ba4d79a0cb811adbdfc23 Mon Sep 17 00:00:00 2001
 From: Martijn Braam <martijn@brixit.nl>
 Date: Sat, 12 Dec 2020 13:31:03 +0100
 Subject: [PATCH] rockchip: Add initial support for the PinePhone Pro
 This is a new device by PINE64 that's very similar to the Pinebook Pro
 that's already supported.
 Specification:
 - Rockchip RK3399
 - 4GB Dual-Channel LPDDR4
 - 128GB eMMC
 - mSD card slot
 - AP6255 for 802.11ac WiFi and Bluetooth
 - 6 inch 720*1440 DSI display
 - Quectel EG25g usb modem
 - Type-C port with alt-mode display (DP 1.2) and PD charging.
 Signed-off-by: Martijn Braam <martijn@brixit.nl>
 ---
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi |  44 ++
 arch/arm/dts/rk3399-pinephone-pro.dts         | 520 ++++++++++++++++++
 arch/arm/mach-rockchip/rk3399/Kconfig         |   8 +
 board/pine64/pinephone-pro-rk3399/Kconfig     |  15 +
 board/pine64/pinephone-pro-rk3399/MAINTAINERS |   8 +
 board/pine64/pinephone-pro-rk3399/Makefile    |   1 +
 .../pinephone-pro-rk3399.c                    |  57 ++
 configs/pinephone-pro-rk3399_defconfig        |  92 ++++
 include/configs/pinephone-pro-rk3399.h        |  23 +
 10 files changed, 769 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts
 create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig
 create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS
 create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile
 create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 create mode 100644 configs/pinephone-pro-rk3399_defconfig
 create mode 100644 include/configs/pinephone-pro-rk3399.h
 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
 index aeaec713..6f123425 100644
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
@@ -145,6 +145,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-nanopi-r4s.dtb \
 	rk3399-orangepi.dtb \
 	rk3399-pinebook-pro.dtb \
 +	rk3399-pinephone-pro.dtb \
 	rk3399-puma-haikou.dtb \
 	rk3399-roc-pc.dtb \
 	rk3399-roc-pc-mezzanine.dtb \
 diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 new file mode 100644
 index 00000000..9d44db59
 --- /dev/null
 +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -0,0 +1,44 @@
 +// SPDX-License-Identifier: GPL-2.0+
 +/*
 + * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
 + * Copyright (C) 2021 Martijn Braam <martijn at brixit.nl>
 + */
 +
 +#include "rk3399-u-boot.dtsi"
 +#include "rk3399-sdram-lpddr4-100.dtsi"
 +
 +/ {
 +	aliases {
 +		spi0 = &spi1;
 +	};
 +
 +	chosen {
 +		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
 +	};
 +
 +	config {
 +		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
 +	};
 +};
 +
 +&i2c0 {
 +	u-boot,dm-pre-reloc;
 +};
 +
 +&rk818 {
 +	u-boot,dm-pre-reloc;
 +};
 +
 +&rng {
 +	status = "okay";
 +};
 +
 +&sdhci {
 +	max-frequency = <25000000>;
 +	u-boot,dm-pre-reloc;
 +};
 +
 +&sdmmc {
 +	max-frequency = <20000000>;
 +	u-boot,dm-pre-reloc;
 +};
 diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
 new file mode 100644
 index 00000000..3fe1845c
 --- /dev/null
 +++ b/arch/arm/dts/rk3399-pinephone-pro.dts
@@ -0,0 +1,520 @@
 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 +/*
 + * Copyright (c) 2021 Martijn Braam <martijn@brixit.nl>
 + */
 +
 +/dts-v1/;
 +#include "rk3399.dtsi"
 +#include "rk3399-opp.dtsi"
 +
 +/ {
 +	model = "Pine64 PinePhone Pro";
 +	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
 +
 +	chosen {
 +		stdout-path = "serial2:1500000n8";
 +	};
 +
 +	sdio_pwrseq: sdio-pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		pinctrl-names = "default";
 +	};
 +
 +	/* Power tree */
 +	/* Root power source */
 +	vcc_sysin: vcc-sysin {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc_sysin";
 +		regulator-always-on;
 +		regulator-boot-on;
 +	};
 +
 +	/* Main 3.3v supply */
 +	vcc3v3_sys: vcc3v3-sys {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc3v3_sys";
 +		regulator-always-on;
 +		regulator-boot-on;
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		vin-supply = <&vcc_sysin>;
 +
 +		regulator-state-mem {
 +			regulator-on-in-suspend;
 +		};
 +	};
 +};
 +
 +&cpu_l0 {
 +	cpu-supply = <&vdd_cpu_l>;
 +};
 +
 +&cpu_l1 {
 +	cpu-supply = <&vdd_cpu_l>;
 +};
 +
 +&cpu_l2 {
 +	cpu-supply = <&vdd_cpu_l>;
 +};
 +
 +&cpu_l3 {
 +	cpu-supply = <&vdd_cpu_l>;
 +};
 +
 +&cpu_b0 {
 +	cpu-supply = <&vdd_cpu_b>;
 +};
 +
 +&cpu_b1 {
 +	cpu-supply = <&vdd_cpu_b>;
 +};
 +
 +&emmc_phy {
 +	status = "okay";
 +};
 +
 +&gpu {
 +	mali-supply = <&vdd_gpu>;
 +	status = "okay";
 +};
 +
 +&i2c0 {
 +	clock-frequency = <400000>;
 +	i2c-scl-rising-time-ns = <168>;
 +	i2c-scl-falling-time-ns = <4>;
 +	status = "okay";
 +
 +	rk818: pmic@1c {
 +		compatible = "rockchip,rk818";
 +		reg = <0x1c>;
 +		interrupt-parent = <&gpio1>;
 +		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
 +		#clock-cells = <1>;
 +		clock-output-names = "xin32k", "rk808-clkout2";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&pmic_int_l>;
 +		rockchip,system-power-controller;
 +		wakeup-source;
 +
 +		vcc1-supply = <&vcc_sysin>;
 +		vcc2-supply = <&vcc_sysin>;
 +		vcc3-supply = <&vcc_sysin>;
 +		vcc4-supply = <&vcc_sysin>;
 +		vcc6-supply = <&vcc_sysin>;
 +		vcc7-supply = <&vcc3v3_sys>;
 +		vcc8-supply = <&vcc_sysin>;
 +		vcc9-supply = <&vcc3v3_sys>;
 +
 +		regulators {
 +			vdd_cpu_l: DCDC_REG1 {
 +				regulator-name = "vdd_cpu_1";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <750000>;
 +				regulator-max-microvolt = <1350000>;
 +				regulator-ramp-delay = <6001>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vdd_center: DCDC_REG2 {
 +				regulator-name = "vdd_center";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <800000>;
 +				regulator-max-microvolt = <1350000>;
 +				regulator-ramp-delay = <6001>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcc_ddr: DCDC_REG3 {
 +				regulator-name = "vcc_ddr";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +				};
 +			};
 +
 +			vcc_1v8: DCDC_REG4 {
 +				regulator-name = "vcc_1v8";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <1800000>;
 +				regulator-max-microvolt = <1800000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <1800000>;
 +				};
 +			};
 +
 +			vcca3v0_codec: LDO_REG1 {
 +				regulator-name = "vcca3v0_codec";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <3000000>;
 +				regulator-max-microvolt = <3000000>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcc3v0_touch: LDO_REG2 {
 +				regulator-name = "vcc3v0_touch";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <3000000>;
 +				regulator-max-microvolt = <3000000>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcca1v8_codec: LDO_REG3 {
 +				regulator-name = "vcca1v8_codec";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <1800000>;
 +				regulator-max-microvolt = <1800000>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcc_power_on: LDO_REG4 {
 +				regulator-name = "vcc_power_on";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <3300000>;
 +				regulator-max-microvolt = <3300000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <3300000>;
 +				};
 +			};
 +
 +			vcc_3v0: LDO_REG5 {
 +				regulator-name = "vcc_3v0";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <3000000>;
 +				regulator-max-microvolt = <3000000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <3000000>;
 +				};
 +			};
 +
 +			vcc_1v5: LDO_REG6 {
 +				regulator-name = "vcc_1v5";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <1500000>;
 +				regulator-max-microvolt = <1500000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <1500000>;
 +				};
 +			};
 +
 +			vcc1v8_dvp: LDO_REG7 {
 +				regulator-name = "vcc1v8_dvp";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <1800000>;
 +				regulator-max-microvolt = <1800000>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcc3v3_s3: LDO_REG8 {
 +				regulator-name = "vcc3v3_s3";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <3300000>;
 +				regulator-max-microvolt = <3300000>;
 +				regulator-state-mem {
 +					regulator-off-in-suspend;
 +				};
 +			};
 +
 +			vcc_sd: LDO_REG9 {
 +				regulator-name = "vcc_sd";
 +				regulator-min-microvolt = <1800000>;
 +				regulator-max-microvolt = <3300000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <3300000>;
 +				};
 +			};
 +
 +			vcc3v3_s0: SWITCH_REG {
 +				regulator-name = "vcc3v3_s0";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +				};
 +			};
 +
 +			boost_otg: DCDC_BOOST {
 +				regulator-name = "boost_otg";
 +				regulator-always-on;
 +				regulator-boot-on;
 +				regulator-min-microvolt = <5000000>;
 +				regulator-max-microvolt = <5000000>;
 +				regulator-state-mem {
 +					regulator-on-in-suspend;
 +					regulator-suspend-microvolt = <5000000>;
 +				};
 +			};
 +
 +			otg_switch: OTG_SWITCH {
 +				regulator-name = "otg_switch";
 +			};
 +		};
 +	};
 +
 +	vdd_cpu_b: regulator@40 {
 +		compatible = "silergy,syr827";
 +		reg = <0x40>;
 +		fcs,suspend-voltage-selector = <1>;
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&vsel1_pin>;
 +		regulator-name = "vdd_cpu_b";
 +		regulator-min-microvolt = <712500>;
 +		regulator-max-microvolt = <1500000>;
 +		regulator-ramp-delay = <1000>;
 +		regulator-always-on;
 +		regulator-boot-on;
 +
 +		regulator-state-mem {
 +			regulator-off-in-suspend;
 +		};
 +	};
 +
 +	vdd_gpu: regulator@41 {
 +		compatible = "silergy,syr828";
 +		reg = <0x41>;
 +		fcs,suspend-voltage-selector = <1>;
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&vsel2_pin>;
 +		regulator-name = "vdd_gpu";
 +		regulator-min-microvolt = <712500>;
 +		regulator-max-microvolt = <1500000>;
 +		regulator-ramp-delay = <1000>;
 +		regulator-always-on;
 +		regulator-boot-on;
 +
 +		regulator-state-mem {
 +			regulator-off-in-suspend;
 +		};
 +	};
 +};
 +
 +&i2c1 {
 +	i2c-scl-rising-time-ns = <300>;
 +	i2c-scl-falling-time-ns = <15>;
 +	status = "okay";
 +};
 +
 +&i2c3 {
 +	i2c-scl-rising-time-ns = <450>;
 +	i2c-scl-falling-time-ns = <15>;
 +	status = "okay";
 +};
 +
 +&i2c4 {
 +	i2c-scl-rising-time-ns = <600>;
 +	i2c-scl-falling-time-ns = <20>;
 +	status = "okay";
 +
 +	fusb0: typec-portc@22 {
 +		compatible = "fcs,fusb302";
 +		reg = <0x22>;
 +		interrupt-parent = <&gpio1>;
 +		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&fusb0_int>;
 +		status = "okay";
 +	};
 +};
 +
 +&io_domains {
 +	status = "okay";
 +
 +	bt656-supply = <&vcc1v8_dvp>;
 +	audio-supply = <&vcca1v8_codec>;
 +	sdmmc-supply = <&vcc_sd>;
 +	gpio1830-supply = <&vcc_3v0>;
 +};
 +
 +&pmu_io_domains {
 +	pmu1830-supply = <&vcc_3v0>;
 +	status = "okay";
 +};
 +
 +&pinctrl {
 +	bt {
 +		bt_enable_h: bt-enable-h {
 +			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +
 +		bt_host_wake_l: bt-host-wake-l {
 +			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 +		};
 +
 +		bt_wake_l: bt-wake-l {
 +			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +	};
 +
 +	buttons {
 +		pwrbtn: pwrbtn {
 +			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 +		};
 +	};
 +
 +	fusb302x {
 +		fusb0_int: fusb0-int {
 +			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 +		};
 +	};
 +
 +	leds {
 +		work_led_pin: work-led-pin {
 +			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +
 +		diy_led_pin: diy-led-pin {
 +			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +	};
 +
 +	pcie {
 +		pcie_perst: pcie-perst {
 +			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +
 +		pcie_pwr_en: pcie-pwr-en {
 +			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +	};
 +
 +	pmic {
 +		pmic_int_l: pmic-int-l {
 +			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 +		};
 +
 +		vsel1_pin: vsel1-pin {
 +			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 +		};
 +
 +		vsel2_pin: vsel2-pin {
 +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 +		};
 +	};
 +
 +	sdcard {
 +		sdmmc0_pwr_h: sdmmc0-pwr-h {
 +			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +
 +	};
 +
 +	sdio-pwrseq {
 +		wifi_enable_h: wifi-enable-h {
 +			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +	};
 +
 +	usb-typec {
 +		vcc5v0_typec_en: vcc5v0_typec_en {
 +			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 +		};
 +	};
 +
 +	usb2 {
 +		vcc5v0_host_en: vcc5v0-host-en {
 +			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 +		};
 +	};
 +};
 +
 +&pwm0 {
 +	status = "okay";
 +};
 +
 +&pwm1 {
 +	status = "okay";
 +};
 +
 +&pwm2 {
 +	status = "okay";
 +};
 +
 +&sdio0 {
 +	bus-width = <4>;
 +	cap-sd-highspeed;
 +	cap-sdio-irq;
 +	disable-wp;
 +	keep-power-in-suspend;
 +	mmc-pwrseq = <&sdio_pwrseq>;
 +	non-removable;
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 +	sd-uhs-sdr104;
 +	status = "okay";
 +};
 +
 +&sdmmc {
 +	bus-width = <4>;
 +	cap-sd-highspeed;
 +	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 +	disable-wp;
 +	max-frequency = <150000000>;
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 +	vmmc-supply = <&vcc3v3_s3>;
 +	vqmmc-supply = <&vcc_1v8>;
 +	status = "okay";
 +};
 +
 +&sdhci {
 +	bus-width = <8>;
 +	mmc-hs200-1_8v;
 +	non-removable;
 +	status = "okay";
 +};
 +
 +&tsadc {
 +	/* tshut mode 0:CRU 1:GPIO */
 +	rockchip,hw-tshut-mode = <1>;
 +	/* tshut polarity 0:LOW 1:HIGH */
 +	rockchip,hw-tshut-polarity = <1>;
 +	status = "okay";
 +};
 +
 +&uart2 {
 +	status = "okay";
 +};
 +
 +&vopb {
 +	status = "okay";
 +};
 +
 +&vopb_mmu {
 +	status = "okay";
 +};
 +
 +&vopl {
 +	status = "okay";
 +};
 +
 +&vopl_mmu {
 +	status = "okay";
 +};
 diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
 index 17628f91..3ba603ca 100644
 --- a/arch/arm/mach-rockchip/rk3399/Kconfig
 +++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -28,6 +28,13 @@ config TARGET_PINEBOOK_PRO_RK3399
 	  with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
 	  1920*1080 screen and all the usual laptop features.
 +config TARGET_PINEPHONE_PRO_RK3399
 +	bool "PinePhone Pro"
 +	help
 +	  PinePhone Pro is a phone based on the Rockchip rk3399 SoC
 +	  with 4Gb RAM, onboard eMMC, USB-C, a headphone jack,
 +	  720x1440 screen and an external Quectel USB modem.
 +
 config TARGET_PUMA_RK3399
 	bool "Theobroma Systems RK3399-Q7 (Puma)"
 	help
@@ -154,6 +161,7 @@ endif # BOOTCOUNT_LIMIT
 source "board/firefly/roc-pc-rk3399/Kconfig"
 source "board/google/gru/Kconfig"
 source "board/pine64/pinebook-pro-rk3399/Kconfig"
 +source "board/pine64/pinephone-pro-rk3399/Kconfig"
 source "board/pine64/rockpro64_rk3399/Kconfig"
 source "board/rockchip/evb_rk3399/Kconfig"
 source "board/theobroma-systems/puma_rk3399/Kconfig"
 diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig
 new file mode 100644
 index 00000000..13d6465a
 --- /dev/null
 +++ b/board/pine64/pinephone-pro-rk3399/Kconfig
@@ -0,0 +1,15 @@
 +if TARGET_PINEPHONE_PRO_RK3399
 +
 +config SYS_BOARD
 +	default "pinephone-pro-rk3399"
 +
 +config SYS_VENDOR
 +	default "pine64"
 +
 +config SYS_CONFIG_NAME
 +	default "pinephone-pro-rk3399"
 +
 +config BOARD_SPECIFIC_OPTIONS
 +	def_bool y
 +
 +endif
 diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
 new file mode 100644
 index 00000000..9ca4fc4c
 --- /dev/null
 +++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
@@ -0,0 +1,8 @@
 +PINEPHONE_PRO
 +M:	Martijn Braam <martijn@brixit.nl>
 +S:	Maintained
 +F:	board/pine64/rk3399-pinephone-pro/
 +F:	include/configs/rk3399-pinephone-pro.h
 +F:	arch/arm/dts/rk3399-pinephone-pro.dts
 +F:	arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 +F:	configs/pinephone-pro-rk3399_defconfig
 diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile
 new file mode 100644
 index 00000000..8d920305
 --- /dev/null
 +++ b/board/pine64/pinephone-pro-rk3399/Makefile
@@ -0,0 +1 @@
 +obj-y	+= pinephone-pro-rk3399.o
 diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 new file mode 100644
 index 00000000..8efeb6ea
 --- /dev/null
 +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -0,0 +1,57 @@
 +// SPDX-License-Identifier: GPL-2.0+
 +/*
 + * (C) Copyright 2019 Vasily Khoruzhick <anarsoul@gmail.com>
 + * (C) Copyright 2021 Martijn Braam <martijn@brixit.nl>
 + */
 +
 +#include <common.h>
 +#include <dm.h>
 +#include <init.h>
 +#include <syscon.h>
 +#include <asm/io.h>
 +#include <asm/arch-rockchip/clock.h>
 +#include <asm/arch-rockchip/grf_rk3399.h>
 +#include <asm/arch-rockchip/hardware.h>
 +#include <asm/arch-rockchip/misc.h>
 +
 +#define GRF_IO_VSEL_BT565_SHIFT 0
 +#define PMUGRF_CON0_VSEL_SHIFT 8
 +
 +#ifdef CONFIG_MISC_INIT_R
 +static void setup_iodomain(void)
 +{
 +	struct rk3399_grf_regs *grf =
 +	    syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 +	struct rk3399_pmugrf_regs *pmugrf =
 +	    syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
 +
 +	/* BT565 is in 1.8v domain */
 +	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
 +
 +	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
 +	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
 +}
 +
 +int misc_init_r(void)
 +{
 +	const u32 cpuid_offset = 0x7;
 +	const u32 cpuid_length = 0x10;
 +	u8 cpuid[cpuid_length];
 +	int ret;
 +
 +	setup_iodomain();
 +
 +	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
 +	if (ret)
 +		return ret;
 +
 +	ret = rockchip_cpuid_set(cpuid, cpuid_length);
 +	if (ret)
 +		return ret;
 +
 +	ret = rockchip_setup_macaddr();
 +
 +	return ret;
 +}
 +
 +#endif
 diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
 new file mode 100644
 index 00000000..2cf80f7d
 --- /dev/null
 +++ b/configs/pinephone-pro-rk3399_defconfig
@@ -0,0 +1,92 @@
 +CONFIG_ARM=y
 +CONFIG_SKIP_LOWLEVEL_INIT=y
 +CONFIG_ARCH_ROCKCHIP=y
 +CONFIG_SYS_TEXT_BASE=0x00200000
 +CONFIG_NR_DRAM_BANKS=1
 +CONFIG_ENV_SIZE=0x8000
 +CONFIG_ROCKCHIP_RK3399=y
 +CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
 +CONFIG_DEBUG_UART_BASE=0xFF1A0000
 +CONFIG_DEBUG_UART_CLOCK=24000000
 +CONFIG_SPL_SPI_FLASH_SUPPORT=y
 +CONFIG_SPL_SPI_SUPPORT=y
 +CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
 +CONFIG_DEBUG_UART=y
 +CONFIG_SYS_LOAD_ADDR=0x800800
 +CONFIG_BOOTDELAY=3
 +CONFIG_USE_PREBOOT=y
 +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb"
 +CONFIG_DISPLAY_BOARDINFO_LATE=y
 +CONFIG_MISC_INIT_R=y
 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 +CONFIG_SPL_STACK_R=y
 +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 +CONFIG_SPL_MTD_SUPPORT=y
 +CONFIG_SPL_SPI_LOAD=y
 +CONFIG_TPL=y
 +CONFIG_CMD_BOOTZ=y
 +CONFIG_CMD_GPIO=y
 +CONFIG_CMD_GPT=y
 +CONFIG_CMD_I2C=y
 +CONFIG_CMD_MMC=y
 +CONFIG_CMD_PCI=y
 +CONFIG_CMD_USB=y
 +# CONFIG_CMD_SETEXPR is not set
 +CONFIG_CMD_TIME=y
 +CONFIG_CMD_PMIC=y
 +CONFIG_CMD_REGULATOR=y
 +CONFIG_SPL_OF_CONTROL=y
 +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 +CONFIG_ENV_IS_IN_SPI_FLASH=y
 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 +CONFIG_ROCKCHIP_GPIO=y
 +CONFIG_SYS_I2C_ROCKCHIP=y
 +CONFIG_DM_KEYBOARD=y
 +CONFIG_LED=y
 +CONFIG_LED_GPIO=y
 +CONFIG_MISC=y
 +CONFIG_ROCKCHIP_EFUSE=y
 +CONFIG_MMC_DW=y
 +CONFIG_MMC_DW_ROCKCHIP=y
 +CONFIG_MMC_SDHCI=y
 +CONFIG_MMC_SDHCI_SDMA=y
 +CONFIG_MMC_SDHCI_ROCKCHIP=y
 +CONFIG_SF_DEFAULT_SPEED=20000000
 +CONFIG_SPI_FLASH_GIGADEVICE=y
 +CONFIG_SPI_FLASH_WINBOND=y
 +CONFIG_DM_ETH=y
 +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 +CONFIG_PHY_ROCKCHIP_TYPEC=y
 +CONFIG_DM_PMIC_FAN53555=y
 +CONFIG_PMIC_RK8XX=y
 +CONFIG_REGULATOR_PWM=y
 +CONFIG_REGULATOR_RK8XX=y
 +CONFIG_PWM_ROCKCHIP=y
 +CONFIG_RAM_RK3399_LPDDR4=y
 +CONFIG_DM_RESET=y
 +CONFIG_DM_RNG=y
 +CONFIG_RNG_ROCKCHIP=y
 +CONFIG_BAUDRATE=1500000
 +CONFIG_DEBUG_UART_SHIFT=2
 +CONFIG_ROCKCHIP_SPI=y
 +CONFIG_SYSRESET=y
 +CONFIG_USB=y
 +CONFIG_USB_XHCI_HCD=y
 +CONFIG_USB_XHCI_DWC3=y
 +CONFIG_USB_EHCI_HCD=y
 +CONFIG_USB_EHCI_GENERIC=y
 +CONFIG_USB_OHCI_HCD=y
 +CONFIG_USB_OHCI_GENERIC=y
 +CONFIG_USB_DWC3=y
 +CONFIG_USB_DWC3_GENERIC=y
 +CONFIG_USB_KEYBOARD=y
 +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_USB_HOST_ETHER=y
 +CONFIG_USB_ETHER_ASIX=y
 +CONFIG_USB_ETHER_RTL8152=y
 +CONFIG_DM_VIDEO=y
 +CONFIG_DISPLAY=y
 +CONFIG_VIDEO_ROCKCHIP=y
 +CONFIG_DISPLAY_ROCKCHIP_EDP=y
 +CONFIG_SPL_TINY_MEMSET=y
 +CONFIG_ERRNO_STR=y
 diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h
 new file mode 100644
 index 00000000..fefa793f
 --- /dev/null
 +++ b/include/configs/pinephone-pro-rk3399.h
@@ -0,0 +1,23 @@
 +/* SPDX-License-Identifier: GPL-2.0+ */
 +/*
 + * Copyright (C) 2016 Rockchip Electronics Co., Ltd
 + * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
 + * Copyright (C) 2021 Martijn Braam <martijn@brixit.nl>
 + */
 +
 +#ifndef __PINEPHONE_PRO_RK3399_H
 +#define __PINEPHONE_PRO_RK3399_H
 +
 +#define ROCKCHIP_DEVICE_SETTINGS \
 +		"stdin=serial,usbkbd\0" \
 +		"stdout=serial,vidconsole\0" \
 +		"stderr=serial,vidconsole\0"
 +
 +#include <configs/rk3399_common.h>
 +
 +#define SDRAM_BANK_SIZE			(2UL << 30)
 +
 +#define CONFIG_USB_OHCI_NEW
 +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 +
 +#endif
 -- 
 2.34.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1003-Configure-USB-power-settings-for-PinePhone-Pro.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1003-Configure-USB-power-settings-for-PinePhone-Pro.patch
@ -0,0 +1,228 @@
 From 8ee2257dda6bed2f1ae117e614637036003785d4 Mon Sep 17 00:00:00 2001
 From: Dragan Simic <dragan.simic@gmail.com>
 Date: Thu, 30 Dec 2021 00:08:51 +0100
 Subject: [PATCH] Configure USB power settings for PinePhone Pro
 ---
 arch/arm/mach-rockchip/rk3399/rk3399.c        |  5 ++
 .../pinephone-pro-rk3399.c                    | 58 ++++++++++++++++---
 configs/pinephone-pro-rk3399_defconfig        |  6 ++
 drivers/power/regulator/rk8xx.c               | 21 ++++---
 4 files changed, 72 insertions(+), 18 deletions(-)
 diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
 index d40969c8..644e4ab2 100644
 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c
 +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -248,9 +248,14 @@ void __weak led_setup(void)
 {
 }
 +void __weak power_setup(void)
 +{
 +}
 +
 void spl_board_init(void)
 {
 	led_setup();
 +	power_setup();
 #if defined(SPL_GPIO)
 	struct rockchip_cru *cru = rockchip_get_cru();
 diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 index 8efeb6ea..88583e31 100644
 --- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -2,8 +2,14 @@
 /*
  * (C) Copyright 2019 Vasily Khoruzhick <anarsoul@gmail.com>
  * (C) Copyright 2021 Martijn Braam <martijn@brixit.nl>
 + * (C) Copyright 2021 Dragan Simic <dsimic@buserror.io>
  */
 +/*
 + * TODO: Disable debugging
 + */
 +#define DEBUG
 +
 #include <common.h>
 #include <dm.h>
 #include <init.h>
@@ -13,6 +19,8 @@
 #include <asm/arch-rockchip/grf_rk3399.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/misc.h>
 +#include <power/regulator.h>
 +#include <power/rk8xx_pmic.h>
 #define GRF_IO_VSEL_BT565_SHIFT 0
 #define PMUGRF_CON0_VSEL_SHIFT 8
@@ -20,15 +28,13 @@
 #ifdef CONFIG_MISC_INIT_R
 static void setup_iodomain(void)
 {
 -	struct rk3399_grf_regs *grf =
 -	    syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 -	struct rk3399_pmugrf_regs *pmugrf =
 -	    syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
 +	struct rk3399_grf_regs *grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 +	struct rk3399_pmugrf_regs *pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
 -	/* BT565 is in 1.8v domain */
 +	/* BT565 is in 1.8 V domain */
 	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
 -	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
 +	/* Set GPIO1 1.8/3.0 V source select to PMU1830_VOL */
 	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
 }
@@ -53,5 +59,43 @@ int misc_init_r(void)
 	return ret;
 }
 +#endif /* CONFIG_MISC_INIT_R */
 -#endif
 +/*
 + * TODO: Change CONFIG_SPL_POWER_SUPPORT to CONFIG_SPL_POWER, to match newer U-Boot versions.
 + *       The same applies to CONFIG_SPL_I2C_SUPPORT.
 + */
 +
 +#if defined(CONFIG_SPL_BUILD) && \
 +    CONFIG_IS_ENABLED(POWER_SUPPORT) && !CONFIG_IS_ENABLED(OF_PLATDATA)
 +static int setup_usb_power(void)
 +{
 +	struct udevice *pmic;
 +	int ret;
 +
 +	ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
 +	if (ret)
 +		return ret;
 +
 +	/* set USB current limit to 2.5 A */
 +	ret = rk818_spl_configure_usb_input_current(pmic, 2500);
 +	if (ret)
 +		return ret;
 +
 +	/* set USB low voltage threshold to 3.26 V */
 +	ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
 +	if (ret)
 +		return ret;
 +
 +	return 0;
 +}
 +
 +void power_setup(void)
 +{
 +	int ret;
 +
 +	ret = setup_usb_power();
 +	if (ret)
 +		debug("Failed to configure USB power settings: %d\n", ret);
 +}
 +#endif /* CONFIG_SPL_BUILD && POWER_SUPPORT && !OF_PLATDATA */
 diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
 index 2cf80f7d..b7ca9317 100644
 --- a/configs/pinephone-pro-rk3399_defconfig
 +++ b/configs/pinephone-pro-rk3399_defconfig
@@ -23,6 +23,11 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 +CONFIG_SPL_I2C_SUPPORT=y
 +CONFIG_SPL_POWER_SUPPORT=y
 +CONFIG_SPL_GPIO_SUPPORT=y
 +CONFIG_SPL_DM=y
 +CONFIG_SPL_DM_REGULATOR=y
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPIO=y
@@ -34,6 +39,7 @@ CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_CMD_PMIC=y
 +# CONFIG_SPL_PMIC_CHILDREN is not set
 CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c
 index 0ee07ad2..9d42a6ca 100644
 --- a/drivers/power/regulator/rk8xx.c
 +++ b/drivers/power/regulator/rk8xx.c
@@ -16,14 +16,10 @@
 #include <power/pmic.h>
 #include <power/regulator.h>
 -#ifndef CONFIG_SPL_BUILD
 -#define ENABLE_DRIVER
 -#endif
 -
 /* Not used or exisit register and configure */
 #define NA			0xff
 -/* Field Definitions */
 +/* Field definitions */
 #define RK808_BUCK_VSEL_MASK	0x3f
 #define RK808_BUCK4_VSEL_MASK	0xf
 #define RK808_LDO_VSEL_MASK	0x1f
@@ -145,7 +141,7 @@ static const struct rk8xx_reg_info rk818_buck[] = {
 	{ 1800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK818_BUCK4_VSEL_MASK, },
 };
 -#ifdef ENABLE_DRIVER
 +#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
 static const struct rk8xx_reg_info rk808_ldo[] = {
 	{ 1800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
 	{ 1800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
@@ -206,8 +202,9 @@ static const struct rk8xx_reg_info rk818_ldo[] = {
 	{  800000, 100000, REG_LDO7_ON_VSEL, REG_LDO7_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
 	{ 1800000, 100000, REG_LDO8_ON_VSEL, REG_LDO8_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
 };
 -#endif
 +#endif /* PMIC_CHILDREN */
 +#ifdef CONFIG_SPL_BUILD
 static const u16 rk818_chrg_cur_input_array[] = {
 	450, 800, 850, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000
 };
@@ -215,6 +212,7 @@ static const u16 rk818_chrg_cur_input_array[] = {
 static const uint rk818_chrg_shutdown_vsel_array[] = {
 	2780000, 2850000, 2920000, 2990000, 3060000, 3130000, 3190000, 3260000
 };
 +#endif /* CONFIG_SPL_BUILD */
 static const struct rk8xx_reg_info *get_buck_reg(struct udevice *pmic,
 						 int num, int uvolt)
@@ -357,7 +355,7 @@ static int _buck_set_enable(struct udevice *pmic, int buck, bool enable)
 	return ret;
 }
 -#ifdef ENABLE_DRIVER
 +#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
 static int _buck_set_suspend_value(struct udevice *pmic, int buck, int uvolt)
 {
 	const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck, uvolt);
@@ -1121,8 +1119,9 @@ U_BOOT_DRIVER(rk8xx_switch) = {
 	.ops = &rk8xx_switch_ops,
 	.probe = rk8xx_switch_probe,
 };
 -#endif
 +#endif /* PMIC_CHILDREN */
 +#ifdef CONFIG_SPL_BUILD
 int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt)
 {
 	int ret;
@@ -1153,6 +1152,6 @@ int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt)
 		if (uvolt <= rk818_chrg_shutdown_vsel_array[i])
 			break;
 -	return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_CHG_SD_VSEL_MASK,
 -			       i);
 +	return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_CHG_SD_VSEL_MASK, i);
 }
 +#endif /* CONFIG_SPL_BUILD */
 -- 
 2.34.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1003-mmc-sunxi-Add-support-for-DMA-transfers.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1003-mmc-sunxi-Add-support-for-DMA-transfers.patch
@ -1,354 +0,0 @@
 From b0950e4696b391578f7428337e41fa8ca14b225d Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Wed, 11 Sep 2019 20:45:28 +0200
 Subject: [PATCH 27/29] mmc: sunxi: Add support for DMA transfers
 Allwinner MMC controller supports DMA via internal DMA controller,
 use it.
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 arch/arm/include/asm/arch-sunxi/mmc.h |   7 +
 drivers/mmc/sunxi_mmc.c               | 204 +++++++++++++++++++++++---
 2 files changed, 192 insertions(+), 19 deletions(-)
 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
 index 5daacf10eb..dc8ea6f43a 100644
 --- a/arch/arm/include/asm/arch-sunxi/mmc.h
 +++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -112,6 +112,10 @@ struct sunxi_mmc {
 	 SUNXI_MMC_RINT_COMMAND_DONE |		\
 	 SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
 +#define SUNXI_MMC_FTRGLEVEL_BURST_SIZE(v)	(((v) & 0x7) << 28)
 +#define SUNXI_MMC_FTRGLEVEL_RX_TL(v)		(((v) & 0xfff) << 16)
 +#define SUNXI_MMC_FTRGLEVEL_TX_TL(v)		(((v) & 0xffff) << 0)
 +
 #define SUNXI_MMC_STATUS_RXWL_FLAG		(0x1 << 0)
 #define SUNXI_MMC_STATUS_TXWL_FLAG		(0x1 << 1)
 #define SUNXI_MMC_STATUS_FIFO_EMPTY		(0x1 << 2)
@@ -130,6 +134,9 @@ struct sunxi_mmc {
 #define SUNXI_MMC_IDIE_TXIRQ		(0x1 << 0)
 #define SUNXI_MMC_IDIE_RXIRQ		(0x1 << 1)
 +#define SUNXI_MMC_IDST_TXIRQ		(0x1 << 0)
 +#define SUNXI_MMC_IDST_RXIRQ		(0x1 << 1)
 +
 #define SUNXI_MMC_COMMON_CLK_GATE		(1 << 16)
 #define SUNXI_MMC_COMMON_RESET			(1 << 18)
 diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
 index 28af8e6ac5..47c947cdb8 100644
 --- a/drivers/mmc/sunxi_mmc.c
 +++ b/drivers/mmc/sunxi_mmc.c
@@ -9,6 +9,7 @@
 #include <common.h>
 #include <dm.h>
 +#include <cpu_func.h>
 #include <errno.h>
 #include <log.h>
 #include <malloc.h>
@@ -27,6 +28,27 @@
 #define CCM_MMC_CTRL_MODE_SEL_NEW	0
 #endif
 +#define DMA_CONFIG_DIC BIT(1)  // flag: disable interrupt after this descriptor's buffer is processed
 +#define DMA_CONFIG_LAST BIT(2) // flag: last descriptor
 +#define DMA_CONFIG_FIRST BIT(3) // flag: first descriptor
 +#define DMA_CONFIG_CHAIN BIT(4) // flag: buf_addr_ptr2 points to next descriptor
 +#define DMA_CONFIG_ERROR BIT(30) // flag: out: error happened
 +#define DMA_CONFIG_HOLD BIT(31) // flag: desc owned by IDMAC (set to 1)
 +
 +#if defined(CONFIG_MACH_SUN50I)
 +// mmc2 on A64 only allows for 8k
 +#define DMA_BUF_MAX_SIZE (1 << 13)
 +#else
 +#define DMA_BUF_MAX_SIZE (1 << 16)
 +#endif
 +
 +struct sunxi_idma_desc {
 +        u32 config;
 +        u32 buf_size;
 +        u32 buf_addr_ptr1;
 +        u32 buf_addr_ptr2;
 +};
 +
 struct sunxi_mmc_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
@@ -39,6 +61,8 @@ struct sunxi_mmc_priv {
 	struct gpio_desc cd_gpio;	/* Change Detect GPIO */
 	struct sunxi_mmc *reg;
 	struct mmc_config cfg;
 +	unsigned n_dma_descs;
 +	struct sunxi_idma_desc* dma_descs;
 };
 #if !CONFIG_IS_ENABLED(DM_MMC)
@@ -318,7 +342,7 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 	if (timeout_msecs < 2000)
 		timeout_msecs = 2000;
 -	/* Always read / write data through the CPU */
 +	/* Read / write data through the CPU */
 	setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
 	start = get_timer(0);
@@ -328,7 +352,7 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 		while ((status = readl(&priv->reg->status)) & status_bit) {
 			if (get_timer(start) > timeout_msecs)
 -				return -1;
 +				return -ETIMEDOUT;
 		}
 		/*
@@ -360,21 +384,142 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 	return 0;
 }
 +static void flush_cache_auto_align(void* buf, size_t len)
 +{
 +	uintptr_t mask = ~((uintptr_t)CONFIG_SYS_CACHELINE_SIZE - 1);
 +	uintptr_t start = (uintptr_t)buf & mask;
 +
 +	len = (len + 2 * CONFIG_SYS_CACHELINE_SIZE) & mask;
 +
 +	flush_cache(start, len);
 +}
 +
 +static int mmc_trans_data_by_dma(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 +				 struct mmc_data *data)
 +{
 +	const int reading = !!(data->flags & MMC_DATA_READ);
 +	uint8_t *buff = (uint8_t*)(reading ? data->dest : data->src);
 +	unsigned byte_cnt = data->blocksize * data->blocks;
 +	unsigned i, n_desc, last_block_size;
 +	u32 rval;
 +
 +	/* data pointer and transfer size needs to be aligned to 4 bytes */
 +
 +	/* Read / write data through IDMAC */
 +	clrbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
 +
 +	n_desc = byte_cnt / DMA_BUF_MAX_SIZE;
 +	last_block_size = byte_cnt % DMA_BUF_MAX_SIZE;
 +	if (last_block_size)
 +		n_desc++;
 +
 +	if (n_desc > priv->n_dma_descs)
 +		return -ENOMEM;
 +
 +	memset(priv->dma_descs, 0, sizeof(struct sunxi_idma_desc) * n_desc);
 +
 +	for (i = 0; i < n_desc; i++) {
 +		struct sunxi_idma_desc* desc = &priv->dma_descs[i];
 +		bool is_last = i == n_desc - 1;
 +		bool is_first = i == 0;
 +
 +		desc->config = DMA_CONFIG_CHAIN | DMA_CONFIG_HOLD
 +			| (is_last ? DMA_CONFIG_LAST : DMA_CONFIG_DIC)
 +			| (is_first ? DMA_CONFIG_FIRST : 0);
 +
 +		if (is_last && last_block_size)
 +			desc->buf_size = last_block_size;
 +		else
 +			desc->buf_size = DMA_BUF_MAX_SIZE;
 +
 +		desc->buf_addr_ptr1 = (uintptr_t)buff + i * DMA_BUF_MAX_SIZE;
 +		if (!is_last)
 +			desc->buf_addr_ptr2 = (uintptr_t)(desc + 1);
 +	}
 +
 +	/*
 +	 * Make sure everyhting needed for a transfer is in DRAM.
 +	 */
 +
 +	flush_cache_auto_align(buff, byte_cnt);
 +	flush_cache_auto_align(priv->dma_descs,
 +			       sizeof(struct sunxi_idma_desc) * n_desc);
 +
 +	dsb();
 +	isb();
 +
 +	/* dma enable */
 +	setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_DMA_RESET
 +		     | SUNXI_MMC_GCTRL_DMA_ENABLE);
 +
 +	/* idma reset */
 +	writel(SUNXI_MMC_IDMAC_RESET, &priv->reg->dmac);
 +
 +	/* wait idma reset done */
 +	while (readl(&priv->reg->dmac) & SUNXI_MMC_IDMAC_RESET);
 +
 +	/* idma on */
 +	writel(SUNXI_MMC_IDMAC_ENABLE | SUNXI_MMC_IDMAC_FIXBURST,
 +	       &priv->reg->dmac);
 +
 +	/* enable interrupt flags */
 +	rval = readl(&priv->reg->idie)
 +		& ~(SUNXI_MMC_IDIE_RXIRQ | SUNXI_MMC_IDIE_TXIRQ);
 +	rval |= reading ? SUNXI_MMC_IDIE_RXIRQ : SUNXI_MMC_IDIE_TXIRQ;
 +	writel(rval, &priv->reg->idie);
 +
 +	/* set address of the first descriptor */
 +	writel((uintptr_t)priv->dma_descs, &priv->reg->dlba);
 +
 +	/* set fifo fill tresholds for issuing dma */
 +
 +#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
 +	if (priv->mmc_no == 2) {
 +		// for mmc 2 we need to set this differently
 +		writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(3) // burst-16
 +		       | SUNXI_MMC_FTRGLEVEL_RX_TL(15)
 +		       | SUNXI_MMC_FTRGLEVEL_TX_TL(240),
 +		       &priv->reg->ftrglevel);
 +	} else {
 +		writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(2) // burst-8
 +		       | SUNXI_MMC_FTRGLEVEL_RX_TL(7)
 +		       | SUNXI_MMC_FTRGLEVEL_TX_TL(248),
 +		       &priv->reg->ftrglevel);
 +	}
 +#else
 +	writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(2) // burst-8
 +	       | SUNXI_MMC_FTRGLEVEL_RX_TL(7)
 +	       | SUNXI_MMC_FTRGLEVEL_TX_TL(8),
 +	       &priv->reg->ftrglevel);
 +#endif
 +
 +	writel(0xffffffff, &priv->reg->idst);
 +
 +	return 0;
 +}
 +
 static int mmc_rint_wait(struct sunxi_mmc_priv *priv, struct mmc *mmc,
 -			 uint timeout_msecs, uint done_bit, const char *what)
 +			 uint timeout_msecs, uint done_bit, bool wait_dma,
 +			 const char *what)
 {
 	unsigned int status;
 	unsigned long start = get_timer(0);
 +	bool dma_done = true;
 	do {
 		status = readl(&priv->reg->rint);
 +
 		if ((get_timer(start) > timeout_msecs) ||
 		    (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
 			debug("%s timeout %x\n", what,
 			      status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
 			return -ETIMEDOUT;
 		}
 -	} while (!(status & done_bit));
 +
 +		if (wait_dma)
 +			dma_done = readl(&priv->reg->idst)
 +				& (SUNXI_MMC_IDST_TXIRQ | SUNXI_MMC_IDST_RXIRQ);
 +	} while (!(status & done_bit) || !dma_done);
 	return 0;
 }
@@ -388,6 +533,7 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
 	int error = 0;
 	unsigned int status = 0;
 	unsigned int bytecnt = 0;
 +	bool usedma = false;
 	if (priv->fatal_err)
 		return -1;
@@ -424,42 +570,45 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
 	      cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
 	writel(cmd->cmdarg, &priv->reg->arg);
 -	if (!data)
 -		writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 -
 	/*
 	 * transfer data and check status
 	 * STATREG[2] : FIFO empty
 	 * STATREG[3] : FIFO full
 	 */
 	if (data) {
 -		int ret = 0;
 -
 		bytecnt = data->blocksize * data->blocks;
 		debug("trans data %d bytes\n", bytecnt);
 -		writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 -		ret = mmc_trans_data_by_cpu(priv, mmc, data);
 -		if (ret) {
 -			error = readl(&priv->reg->rint) &
 -				SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
 -			error = -ETIMEDOUT;
 -			goto out;
 +
 +		if (bytecnt > 64 && !IS_ENABLED(SPL_BUILD)) {
 +			debug("  using dma %d\n", bytecnt);
 +			error = mmc_trans_data_by_dma(priv, mmc, data);
 +			writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 +			usedma = true;
 +		} else {
 +			debug("  using pio\n");
 +			writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 +			error = mmc_trans_data_by_cpu(priv, mmc, data);
 		}
 +
 +		if (error)
 +			goto out;
 +	} else {
 +		writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
 	}
 	error = mmc_rint_wait(priv, mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE,
 -			      "cmd");
 +			      false, "cmd");
 	if (error)
 		goto out;
 	if (data) {
 -		timeout_msecs = 120;
 +		timeout_msecs = 10000;
 		debug("cacl timeout %x msec\n", timeout_msecs);
 		error = mmc_rint_wait(priv, mmc, timeout_msecs,
 				      data->blocks > 1 ?
 				      SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
 				      SUNXI_MMC_RINT_DATA_OVER,
 -				      "data");
 +				      usedma, "data");
 		if (error)
 			goto out;
 	}
@@ -491,6 +640,14 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
 		debug("mmc resp 0x%08x\n", cmd->response[0]);
 	}
 out:
 +	if (data && usedma) {
 +		//status = readl(&reg->idst);
 +		writel(0, &priv->reg->idie);
 +		writel(0xffffffff, &priv->reg->idst);
 +		writel(0, &priv->reg->dmac);
 +		clrbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_DMA_ENABLE);
 +	}
 +
 	if (error < 0) {
 		writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
 		mmc_update_clk(priv);
@@ -674,6 +831,15 @@ static int sunxi_mmc_probe(struct udevice *dev)
 	priv->reg = dev_read_addr_ptr(dev);
 +	// make sure we have enough space for descritors for BLK_SIZE * b_max
 +	priv->n_dma_descs = 512 * 65536 / DMA_BUF_MAX_SIZE;
 +	priv->dma_descs = malloc(sizeof(struct sunxi_idma_desc)
 +				 * priv->n_dma_descs);
 +	if (priv->dma_descs == NULL) {
 +		debug("init mmc alloc failed\n");
 +		return -ENOMEM;
 +	}
 +
 	/* We don't have a sunxi clock driver so find the clock address here */
 	ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
 					  1, &args);
 -- 
 2.31.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1004-mmc-sunxi-DDR-DMA-support-for-SPL.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1004-mmc-sunxi-DDR-DMA-support-for-SPL.patch
@ -1,50 +0,0 @@
 From 1af4c86329397bc553122c650226bd5c7acb1ed0 Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Fri, 13 Sep 2019 22:14:43 +0200
 Subject: [PATCH 28/29] mmc: sunxi: DDR/DMA support for SPL
 ---
 drivers/mmc/sunxi_mmc.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
 diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
 index 47c947cdb8..855dfd35d9 100644
 --- a/drivers/mmc/sunxi_mmc.c
 +++ b/drivers/mmc/sunxi_mmc.c
@@ -579,7 +579,12 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
 		bytecnt = data->blocksize * data->blocks;
 		debug("trans data %d bytes\n", bytecnt);
 -		if (bytecnt > 64 && !IS_ENABLED(SPL_BUILD)) {
 +		// DMA doesn't work when the target is SRAM for some reason.
 +		int reading = !!(data->flags & MMC_DATA_READ);
 +		uint8_t* buf = (uint8_t*)(reading ? data->dest : data->src);
 +		bool is_dram = (uintptr_t)buf >= 0x4000000;
 +
 +		if (bytecnt > 64 && is_dram) {
 			debug("  using dma %d\n", bytecnt);
 			error = mmc_trans_data_by_dma(priv, mmc, data);
 			writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
@@ -715,10 +720,19 @@ struct mmc *sunxi_mmc_init(int sdc_no)
 	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 +	if (sdc_no == 2)
 +		cfg->host_caps |= MMC_MODE_DDR_52MHz;
 	cfg->f_min = 400000;
 	cfg->f_max = 52000000;
 +	// enough descs for a realy big u-boot (4MiB)
 +	priv->n_dma_descs = 4*1024*1024 / DMA_BUF_MAX_SIZE;
 +	priv->dma_descs = malloc(sizeof(struct sunxi_idma_desc)
 +				 * priv->n_dma_descs);
 +	if (priv->dma_descs == NULL)
 +		return NULL;
 +
 	if (mmc_resource_init(sdc_no) != 0)
 		return NULL;
 -- 
 2.31.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1004-mtd-spi-nor-ids-Add-GigaDevice-GD25LQ128E-entry.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1004-mtd-spi-nor-ids-Add-GigaDevice-GD25LQ128E-entry.patch
@ -0,0 +1,28 @@
 From 679d7562f4711b1ad8c5ea54aa804fde5da5a19d Mon Sep 17 00:00:00 2001
 From: Samuel Dionne-Riel <samuel@dionne-riel.com>
 Date: Sat, 5 Feb 2022 21:00:53 -0500
 Subject: [PATCH] mtd: spi-nor-ids: Add GigaDevice GD25LQ128E entry
 ---
 drivers/mtd/spi/spi-nor-ids.c | 5 +++++
 1 file changed, 5 insertions(+)
 diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
 index 4aef1ddd6e2..ff5bc2b2d78 100644
 --- a/drivers/mtd/spi/spi-nor-ids.c
 +++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -112,6 +112,11 @@ const struct flash_info spi_nor_ids[] = {
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
 +	{
 +		INFO("gd25lq128e", 0x257018, 0, 64 * 1024, 256,
 +			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 +			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 +	},
 	{
 		INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256,
 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 -- 
 2.34.0
--- a/dev-embedded/u-boot-pinephone-pro/files/1005-Reconfigure-GPIO4_D3-as-input-on-PinePhone-Pro.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1005-Reconfigure-GPIO4_D3-as-input-on-PinePhone-Pro.patch
@ -0,0 +1,67 @@
 From 7d114ec31e537fcb4c2e4f0fca867b050fd59549 Mon Sep 17 00:00:00 2001
 From: Dragan Simic <dragan.simic@gmail.com>
 Date: Thu, 10 Feb 2022 14:43:05 +0100
 Subject: [PATCH] Reconfigure GPIO4_D3 as input on PinePhone Pro
 ---
 .../pinephone-pro-rk3399.c                    | 39 ++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)
 diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 index d79084614f..bc19b275b2 100644
 --- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -12,6 +12,7 @@
 #include <asm/arch-rockchip/grf_rk3399.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/misc.h>
 +#include <asm-generic/gpio.h>
 #define GRF_IO_VSEL_BT565_SHIFT 0
 #define PMUGRF_CON0_VSEL_SHIFT 8
@@ -52,5 +53,41 @@ int misc_init_r(void)
 	return ret;
 }
 -
 #endif
 +
 +#define GPIO4_D3 "155"
 +
 +static int setup_gpios(void)
 +{
 +	struct gpio_desc gpio;
 +	int ret;
 +
 +	/*
 +	 * MaskROM enables output on GPIO4_D3 and leaves it that way, seemingly
 +	 * because the RK3399 reference BOX and VR REF designs use GPIO4_D3 as
 +	 * EFUSE_VQPS (AD23) power control output, while it is a light sensor
 +	 * interrupt on the PinePhone Pro and needs to be configured as input.
 +	 */
 +	ret = dm_gpio_lookup_name(GPIO4_D3, &gpio);
 +	if (ret)
 +		return ret;
 +
 +	ret = dm_gpio_request(&gpio, "light_int_l");
 +	if (ret)
 +		return ret;
 +
 +	dm_gpio_set_dir_flags(&gpio, GPIOD_IS_IN);
 +
 +	return 0;
 +}
 +
 +int rk_board_late_init(void)
 +{
 +	int ret;
 +
 +	ret = setup_gpios();
 +	if (ret)
 +		debug("Failed to configure GPIO lines: %d\n", ret);
 +
 +	return ret;
 +}
 -- 
 2.33.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1005-spl-ARM-Enable-CPU-caches.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1005-spl-ARM-Enable-CPU-caches.patch
@ -1,148 +0,0 @@
 From 6ad822cb4d64beda76cade8761c49b55620a8b5b Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Tue, 14 Jan 2020 03:56:32 +0100
 Subject: [PATCH 29/29] spl: ARM: Enable CPU caches
 http://u-boot.10912.n7.nabble.com/RFC-PATCH-0-3-spl-Add-D-cache-support-td274750.html
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 arch/arm/lib/cache-cp15.c | 29 ++++++++++++++++++++++++
 common/spl/spl.c          | 46 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+)
 diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
 index aab1bf4360..c2fe0acdc4 100644
 --- a/arch/arm/lib/cache-cp15.c
 +++ b/arch/arm/lib/cache-cp15.c
@@ -116,6 +116,25 @@ __weak void dram_bank_mmu_setup(int bank)
 		set_section_dcache(i, DCACHE_DEFAULT_OPTION);
 }
 +#if defined(CONFIG_SPL_BUILD) && (defined(CONFIG_SPL_MAX_SIZE) || \
 +				  defined(CONFIG_SPL_MAX_FOOTPRINT))
 +__weak void sram_bank_mmu_setup(phys_addr_t start, phys_addr_t size)
 +{
 +	int i;
 +
 +	for (i = start >> MMU_SECTION_SHIFT;
 +	     i < (start >> MMU_SECTION_SHIFT) + (size >> MMU_SECTION_SHIFT);
 +	     i++)
 +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
 +		set_section_dcache(i, DCACHE_WRITETHROUGH);
 +#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
 +		set_section_dcache(i, DCACHE_WRITEALLOC);
 +#else
 +		set_section_dcache(i, DCACHE_WRITEBACK);
 +#endif
 +}
 +#endif
 +
 /* to activate the MMU we need to set up virtual memory: use 1M areas */
 static inline void mmu_setup(void)
 {
@@ -131,6 +150,16 @@ static inline void mmu_setup(void)
 		dram_bank_mmu_setup(i);
 	}
 +#if defined(CONFIG_SPL_BUILD)
 +#if defined(CONFIG_SPL_MAX_SIZE)
 +	sram_bank_mmu_setup(CONFIG_SPL_TEXT_BASE,
 +			    ALIGN(CONFIG_SPL_MAX_SIZE, MMU_SECTION_SIZE));
 +#elif defined(CONFIG_SPL_MAX_FOOTPRINT)
 +	sram_bank_mmu_setup(CONFIG_SPL_TEXT_BASE,
 +			    ALIGN(CONFIG_SPL_MAX_FOOTPRINT, MMU_SECTION_SIZE));
 +#endif
 +#endif
 +
 #if defined(CONFIG_ARMV7_LPAE) && __LINUX_ARM_ARCH__ != 4
 	/* Set up 4 PTE entries pointing to our 4 1GB page tables */
 	for (i = 0; i < 4; i++) {
 diff --git a/common/spl/spl.c b/common/spl/spl.c
 index a0a608fd77..40c9022928 100644
 --- a/common/spl/spl.c
 +++ b/common/spl/spl.c
@@ -10,6 +10,7 @@
 #include <bloblist.h>
 #include <binman_sym.h>
 #include <bootstage.h>
 +#include <cpu_func.h>
 #include <dm.h>
 #include <handoff.h>
 #include <hang.h>
@@ -692,6 +693,35 @@ void board_init_f(ulong dummy)
 }
 #endif
 +#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
 +		defined(CONFIG_ARM)
 +int reserve_mmu(void)
 +{
 +	phys_addr_t ram_top = 0;
 +	/* reserve TLB table */
 +	gd->arch.tlb_size = PGTABLE_SIZE;
 +
 +#ifdef CONFIG_SYS_SDRAM_BASE
 +	ram_top = CONFIG_SYS_SDRAM_BASE;
 +#endif
 +	ram_top += get_effective_memsize();
 +	gd->arch.tlb_addr = ram_top - gd->arch.tlb_size;
 +	debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr,
 +	      gd->arch.tlb_addr + gd->arch.tlb_size);
 +	return 0;
 +}
 +
 +__weak int dram_init_banksize(void)
 +{
 +#if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
 +	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 +	gd->bd->bi_dram[0].size = get_effective_memsize();
 +#endif
 +	return 0;
 +}
 +
 +#endif
 +
 void board_init_r(gd_t *dummy1, ulong dummy2)
 {
 	u32 spl_boot_list[] = {
@@ -707,6 +737,12 @@ void board_init_r(gd_t *dummy1, ulong du
 	debug(">>" SPL_TPL_PROMPT "board_init_r()\n");
 	spl_set_bd();
 +#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
 +		defined(CONFIG_ARM)
 +	dram_init_banksize();
 +	reserve_mmu();
 +	enable_caches();
 +#endif
 #if defined(CONFIG_SYS_SPL_MALLOC_START)
 	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
@@ -717,6 +753,11 @@ void board_init_r(gd_t *dummy1, ulong du
 		if (spl_init())
 			hang();
 	}
 +	if (IS_ENABLED(CONFIG_SPL_ALLOC_BD) && spl_alloc_bd()) {
 +		puts("Cannot alloc bd\n");
 +		hang();
 +	}
 +
 #if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6)
 	/*
 	 * timer_init() does not exist on PPC systems. The timer is initialized
@@ -789,6 +830,11 @@ void board_init_r(gd_t *dummy1, ulong du
 			printf("Warning: Failed to finish bloblist (ret=%d)\n",
 			       ret);
 	}
 +	
 +#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
 +		defined(CONFIG_ARM)
 +	cleanup_before_linux();
 +#endif
 	switch (spl_image.os) {
 	case IH_OS_U_BOOT:
 -- 
 2.31.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1006-common-expose-DRAM-clock-speed.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1006-common-expose-DRAM-clock-speed.patch
@ -1,53 +0,0 @@
 From a568d5efe609fec974d44fec4cba31288ab0f621 Mon Sep 17 00:00:00 2001
 From: Bobby The Builder <bob@najdan.com>
 Date: Mon, 29 Mar 2021 16:42:07 -0400
 Subject: [PATCH 4/5] common: expose DRAM clock speed
 add memory/ram_freq
 ---
 common/board_f.c | 6 ++++--
 common/main.c    | 7 +++++++
 2 files changed, 11 insertions(+), 2 deletions(-)
 diff --git a/common/board_f.c b/common/board_f.c
 index 0cddf0359d..e481c70ef0 100644
 --- a/common/board_f.c
 +++ b/common/board_f.c
@@ -227,12 +227,14 @@ static int show_dram_config(void)
 		print_size(gd->bd->bi_dram[i].size, "\n");
 #endif
 	}
 -	debug("\nDRAM:  ");
 +	debug("\nDRAM Size:  ");
 	print_size(size, "");
 	board_add_ram_info(0);
 	putc('\n');
 -
 +#if defined(CONFIG_DRAM_CLK)
 +	printf("DRAM Clock: %d MHz\n", CONFIG_DRAM_CLK);
 +#endif
 	return 0;
 }
 diff --git a/common/main.c b/common/main.c
 index ae5bcdb32f..85adcc6c13 100644
 --- a/common/main.c
 +++ b/common/main.c
@@ -46,6 +46,13 @@ void main_loop(void)
 	if (IS_ENABLED(CONFIG_VERSION_VARIABLE))
 		env_set("ver", version_string);  /* set version variable */
 +#if defined(CONFIG_DRAM_CLK)
 +	char ram_clk_string[11];
 +	sprintf(ram_clk_string, "%d", CONFIG_DRAM_CLK);
 +	env_set("ram_freq", ram_clk_string);
 +	printf("Set ram_freq : %s\n", ram_clk_string);
 +#endif
 +
 	cli_init();
 	if (IS_ENABLED(CONFIG_USE_PREBOOT))
 -- 
 2.31.1
--- a/dev-embedded/u-boot-pinephone-pro/files/1007-Improve-Allwinner-A64-timer-workaround.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/1007-Improve-Allwinner-A64-timer-workaround.patch
@ -1,11 +0,0 @@
 --- u-boot-c784be467aa7d111f149c2a54557e8828bc5775a/arch/arm/cpu/armv8/generic_timer.c.orig	2021-03-10 18:44:07.000000000 +0100
 +++ u-boot-c784be467aa7d111f149c2a54557e8828bc5775a/arch/arm/cpu/armv8/generic_timer.c	2021-05-22 21:36:48.565156255 +0200
@@ -69,7 +69,7 @@ unsigned long timer_read_counter(void)
 	isb();
 	do {
 		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
 -	} while (((cntpct + 1) & GENMASK(10, 0)) <= 1);
 +	} while (((cntpct + 1) & GENMASK(8, 0)) <= 1);
 	return cntpct;
 }
--- a/dev-embedded/u-boot-pinephone-pro/files/2001-mmc-sdhci-allow-disabling-sdma-in-spl.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/2001-mmc-sdhci-allow-disabling-sdma-in-spl.patch
@ -0,0 +1,67 @@
 From: Peter Geis <pgwipeout@gmail.com>
 To: Peng Fan <peng.fan@nxp.com>, Jaehoon Chung <jh80.chung@samsung.com>
 Cc: Peter Geis <pgwipeout@gmail.com>, u-boot@lists.denx.de
 Subject: [PATCH v1 02/11] mmc: sdhci: allow disabling sdma in spl
 Date: Mon, 21 Feb 2022 20:31:21 -0500
 Rockchip emmc devices have a similar issue to Rockchip dwmmc devices,
 where performing dma to sram causes errors with suspend/resume.
 Allow us to toggle sdma in spl for sdhci similar to adma support, so we
 can ensure dma is not used when loading the sram code.
 Signed-off-by: Peter Geis <pgwipeout@gmail.com>
 Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
 ---
 drivers/mmc/Kconfig | 7 +++++++
 drivers/mmc/sdhci.c | 6 +++---
 2 files changed, 10 insertions(+), 3 deletions(-)
 diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
 index f04cc44e1973..1e4342285ce7 100644
 --- a/drivers/mmc/Kconfig
 +++ b/drivers/mmc/Kconfig
@@ -468,6 +468,13 @@ config MMC_SDHCI_SDMA
 	  This enables support for the SDMA (Single Operation DMA) defined
 	  in the SD Host Controller Standard Specification Version 1.00 .
 +config SPL_MMC_SDHCI_SDMA
 +	bool "Support SDHCI SDMA in SPL"
 +	depends on MMC_SDHCI
 +	help
 +	  This enables support for the SDMA (Single Operation DMA) defined
 +	  in the SD Host Controller Standard Specification Version 1.00 in SPL.
 +
 config MMC_SDHCI_ADMA
 	bool "Support SDHCI ADMA2"
 	depends on MMC_SDHCI
 diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
 index 766e4a6b0c5e..6285e53d12a2 100644
 --- a/drivers/mmc/sdhci.c
 +++ b/drivers/mmc/sdhci.c
@@ -70,7 +70,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
 	}
 }
 -#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
 +#if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
 static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
 			      int *is_aligned, int trans_bytes)
 {
@@ -177,7 +177,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
 		}
 	} while (!(stat & SDHCI_INT_DATA_END));
 -#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
 +#if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
 	dma_unmap_single(host->start_addr, data->blocks * data->blocksize,
 			 mmc_get_dma_dir(data));
 #endif
@@ -836,7 +836,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
 #endif
 	debug("%s, caps: 0x%x\n", __func__, caps);
 -#ifdef CONFIG_MMC_SDHCI_SDMA
 +#if CONFIG_IS_ENABLED(MMC_SDHCI_SDMA)
 	if ((caps & SDHCI_CAN_DO_SDMA)) {
 		host->flags |= USE_SDMA;
 	} else {
--- a/dev-embedded/u-boot-pinephone-pro/files/3001-pinephone-pro-Remove-cargo-culted-iodomain-config.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/3001-pinephone-pro-Remove-cargo-culted-iodomain-config.patch
@ -0,0 +1,32 @@
 From 0885f6b57b218f0de18cd67856fcfdd68843fc9a Mon Sep 17 00:00:00 2001
 From: Samuel Dionne-Riel <samuel@dionne-riel.com>
 Date: Sun, 30 Jan 2022 21:44:07 -0500
 Subject: [PATCH 7/7] [WIP] pinephone-pro: Remove cargo-culted iodomain config
 It is unclear what it actually does, and the TRM states this register
 should already be at `0x1` on reset.
 Thus it is assumed this would be redundant. Except that it is not, and
 keeping this change in will break SPI NOR Flash support. The SPI bus(?)
 will be tied up, I assume, and thus return `ff ff ff` as an identifier
 ---
 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c | 3 ---
 1 file changed, 3 deletions(-)
 diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 index c51d1657a2a..22c2ced2d79 100644
 --- a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
 +++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
@@ -33,9 +33,6 @@ static void setup_iodomain(void)
 	/* BT565 is in 1.8v domain */
 	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
 -
 -	/* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
 -	rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
 }
 int misc_init_r(void)
 -- 
 2.34.0
--- a/dev-embedded/u-boot-pinephone-pro/files/3002-pine64-pinephonePro-SPI-support.patch
+++ b/dev-embedded/u-boot-pinephone-pro/files/3002-pine64-pinephonePro-SPI-support.patch
@ -0,0 +1,40 @@
 From 8945d49c2d60a3b26d215b2d6c45918ac9d143bd Mon Sep 17 00:00:00 2001
 From: Samuel Dionne-Riel <samuel@dionne-riel.com>
 Date: Sun, 30 Jan 2022 16:59:26 -0500
 Subject: [PATCH 6/7] pine64-pinephonePro: SPI support
 NOTE: Original patch modified a bit for the used version of the PPP DT.
 ---
 diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 index 9d44db59783..28bec0a6a70 100644
 --- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
 +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
@@ -42,3 +42,7 @@
 	max-frequency = <20000000>;
 	u-boot,dm-pre-reloc;
 };
 +
 +&spiflash {
 +	u-boot,dm-pre-reloc;
 +};
 diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
 index e6c2df936fb..9a658f37c69 100644
 --- a/arch/arm/dts/rk3399-pinephone-pro.dts
 +++ b/arch/arm/dts/rk3399-pinephone-pro.dts
@@ -503,6 +503,16 @@
 	status = "okay";
 };
 +&spi1 {
 +	status = "okay";
 +
 +	spiflash: flash@0 {
 +		compatible = "jedec,spi-nor";
 +		reg = <0>;
 +		spi-max-frequency = <10000000>;
 +	};
 +};
 +
 &vopb {
 	status = "okay";
 };
--- a/dev-embedded/u-boot-pinephone-pro/u-boot-pinephone-pro-2022.07_rc6.ebuild
+++ b/dev-embedded/u-boot-pinephone-pro/u-boot-pinephone-pro-2022.07_rc6.ebuild
@ -40,15 +40,15 @@ src_prepare() {
 		scripts/kconfig/Makefile \
 		tools/Makefile || die
-		#Apply PinePhone Pro patches
+		#Apply PinePhone Pro patches        
-	        eapply "${FILESDIR}"/1001-pinephone-Add-volume_key-environment-variable.patch
+	        eapply "${FILESDIR}"/1001-Correct-boot-order-to-be-USB-SD-eMMC.patch
-	        eapply "${FILESDIR}"/1002-Enable-led-on-boot-to-notify-user-of-boot-status.patch
+	        eapply "${FILESDIR}"/1002-rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
-	        eapply "${FILESDIR}"/1003-mmc-sunxi-Add-support-for-DMA-transfers.patch
+	        eapply "${FILESDIR}"/1003-Configure-USB-power-settings-for-PinePhone-Pro.patch
-	        eapply "${FILESDIR}"/1004-mmc-sunxi-DDR-DMA-support-for-SPL.patch
+	        eapply "${FILESDIR}"/1004-mtd-spi-nor-ids-Add-GigaDevice-GD25LQ128E-entry.patch
-	        eapply "${FILESDIR}"/1005-spl-ARM-Enable-CPU-caches.patch
+	        eapply "${FILESDIR}"/1005-Reconfigure-GPIO4_D3-as-input-on-PinePhone-Pro.patch
-	        eapply "${FILESDIR}"/1006-common-expose-DRAM-clock-speed.patch
+	        eapply "${FILESDIR}"/2001-mmc-sdhci-allow-disabling-sdma-in-spl.patch
-	        eapply "${FILESDIR}"/1007-Improve-Allwinner-A64-timer-workaround.patch
+	        eapply "${FILESDIR}"/3001-pinephone-pro-Remove-cargo-culted-iodomain-config.patch
-
+	        eapply "${FILESDIR}"/3002-pine64-pinephonePro-SPI-support.patch
 		}
@ -62,7 +62,7 @@ src_compile() {
 	make PLAT=rk3399
 	cp build/rk3399/release/bl31/bl31.elf ${S}
-	cd ${WORKDIR}
+	cd ${S}
 	# Unset a few KBUILD variables. Bug #540476
 	unset KBUILD_OUTPUT KBUILD_SRC
@ -82,14 +82,14 @@ src_compile() {
 	echo 'CONFIG_SPL_DM_SEQ_ALIAS=" y"' >> .config
 	echo 'CONFIG_SF_DEFAULT_BUS=" 1"' >> .config
 	echo 'CONFIG_SPL_MMC_SDHCI_SDMA=" n"' >> .config
-	echo 'CONFIG_SERIAL_PRESENT=" y"' >> .config
+#	echo 'CONFIG_SERIAL_PRESENT=" y"' >> .config
-	echo 'CONFIG_GZIP=" y"' >> .config
+#	echo 'CONFIG_GZIP=" y"' >> .config
-	echo 'CONFIG_CMD_UNZIP=" y"' >> .config
+#	echo 'CONFIG_CMD_UNZIP=" y"' >> .config
-	echo 'CONFIG_CMD_EXT4=" y"' >> .config
+#	echo 'CONFIG_CMD_EXT4=" y"' >> .config
-	echo 'CONFIG_SUPPORT_RAW_INITRD=" y"' >> .config
+#	echo 'CONFIG_SUPPORT_RAW_INITRD=" y"' >> .config
-	echo 'CONFIG_CMD_EXT4_WRITE" n"' >> .config
+#	echo 'CONFIG_CMD_EXT4_WRITE" n"' >> .config
-	echo 'CONFIG_EXT4_WRITE" n"' >> .config
+#	echo 'CONFIG_EXT4_WRITE" n"' >> .config
-	echo 'CONFIG_OF_LIBFDT_OVERLAY=" y"' >> .config
+#	echo 'CONFIG_OF_LIBFDT_OVERLAY=" y"' >> .config
 	emake "${myemakeargs[@]}" EXTRAVERSION=-${PKGREL}