Updated Readme
This commit is contained in:
Gerben Jan Dijkman
parent
3ab5c76b2b
commit
ab553dab04
@ -7,10 +7,10 @@ notice_uboot() {
|
|||||||
|
|
||||||
create_config() {
|
create_config() {
|
||||||
mkdir -p /boot/extlinux
|
mkdir -p /boot/extlinux
|
||||||
echo "LABEL Manjaro ARM
|
echo "LABEL Gentoo Linux 5.16.0 RC3
|
||||||
KERNEL /Image
|
KERNEL /Image
|
||||||
FDT /dtbs/rockchip/rk3399-pinephone-pro.dtb
|
FDT /dtbs/5.16.0-rc3/rockchip/rk3399-pinephone-pro.dtb
|
||||||
APPEND initrd=/initramfs-linux.img console=ttyS2,1500000 root=LABEL=ROOT_MNJRO rw rootwait quiet splash plymouth.ignore-serial-consoles" > /boot/extlinux/extlinux.conf
|
APPEND initrd=/initramfs-linux.img console=ttyS2,1500000 root=/dev/mmcblk2p3 rw rootwait quiet splash plymouth.ignore-serial-consoles" > /boot/extlinux/extlinux.conf
|
||||||
}
|
}
|
||||||
|
|
||||||
post_install() {
|
post_install() {
|
||||||
|
|||||||
@ -99,6 +99,8 @@ src_compile() {
|
|||||||
src_test() { :; }
|
src_test() { :; }
|
||||||
|
|
||||||
src_install() {
|
src_install() {
|
||||||
|
mkdir /boot/extlinux
|
||||||
|
|
||||||
insinto /boot/
|
insinto /boot/
|
||||||
doins ${S}/u-boot.itb
|
doins ${S}/u-boot.itb
|
||||||
|
|
||||||
@ -123,5 +125,9 @@ src_install() {
|
|||||||
|
|
||||||
pkg_postinst() {
|
pkg_postinst() {
|
||||||
einfo "This U-Boot is only to be used for the PinePhone Pro."
|
einfo "This U-Boot is only to be used for the PinePhone Pro."
|
||||||
einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/zImage to the boot partition (replacing the existing Image)."
|
einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/Image to the boot partition (replacing the existing Image)."
|
||||||
|
einfo "New version of U-Boot firmware can be flashed to your microSD card or eMMC module."
|
||||||
|
einfo "You can do that by running:"
|
||||||
|
einfo "# dd if=/boot/idbloader.img of=/dev/mmcblkX seek=64 conv=notrunc,fsync"
|
||||||
|
einfo "# dd if=/boot/u-boot.itb of=/dev/mmcblkX seek=16384 conv=notrunc,fsync"
|
||||||
}
|
}
|
||||||
|
|||||||
@ -1,2 +0,0 @@
|
|||||||
DIST trusted-firmware-a-2.6.tar.gz 6007293 BLAKE2B 860efad37acab15478b725692ebd3ae88205b0048869cc5f3381a465646f789f929480d04552d7b26b31672e636651a00378c41a77f275acaff73ee6a3eedbab SHA512 bfd7df42abd51907264359463c5ab483fc82241fce9344df51dd89e6a65fc8a5c5b3c1481830c60dede8356326bd25f66516d623fda5bc2a9913000b8865ab37
|
|
||||||
DIST u-boot-2021.01_rc3.tar.gz 20895074 BLAKE2B 9841f9b6b7afdf4df24e085a0addcdd78230d0c1ec405b9d4e6c798cc085b77e60cf68d811f209f5214b742afeaa43035bc664844725b5be6261ed861d917bce SHA512 9b9ff1536770397d4a95b903d18724ef46c3d142d8bc79aa1a9afe830bcfb28614035bf610a4cc388e0d0935d2b3bbd53cf9aa4b66873d897c3da5baa6c1b717
|
|
||||||
@ -1,39 +0,0 @@
|
|||||||
### Generic CI Template for chrootbuild
|
|
||||||
#
|
|
||||||
#
|
|
||||||
# Usage: chrootbuild [options]
|
|
||||||
#
|
|
||||||
# -b <branch> Branch to use:
|
|
||||||
# (unstable/testing/stable-staging/stable;
|
|
||||||
# arm-unstable/arm-testing/arm-stable)
|
|
||||||
# default: unstable / arm-unstable
|
|
||||||
# -c Start with clean chroot fs
|
|
||||||
# -h This help
|
|
||||||
# -i <pkg> Install package(s) to chroot fs
|
|
||||||
# (for multiple packages repeat -i flag)
|
|
||||||
# -l <list> List(s) to build
|
|
||||||
# (for multiple lists repeat -l flag)
|
|
||||||
# -n Install built pkg to chroot fs
|
|
||||||
# -p <pkg> Package(s) to build
|
|
||||||
# (for multiple packages repeat -p flag)
|
|
||||||
# -r Remove previously built packages in $PKGDEST
|
|
||||||
# -s Sign package(s)
|
|
||||||
|
|
||||||
build-package:
|
|
||||||
tags:
|
|
||||||
# change the tag to your gitlab-runner
|
|
||||||
- bigbuilds
|
|
||||||
- aarch64
|
|
||||||
script:
|
|
||||||
# build pkg via chrootbuild
|
|
||||||
- export PKG=${PWD##*/}
|
|
||||||
- cd ..
|
|
||||||
- sudo chrootbuild -b arm-testing -cp $PKG
|
|
||||||
- mv -v ./*.pkg.tar.* $PKG
|
|
||||||
#- sudo pacman -Syy && makepkg -scr --noconfirm
|
|
||||||
artifacts:
|
|
||||||
paths:
|
|
||||||
- ./*.pkg.tar.*
|
|
||||||
expire_in: 1 week
|
|
||||||
|
|
||||||
|
|
||||||
@ -1,241 +0,0 @@
|
|||||||
From c4d3ac73a3f19d2372e3d35e833665b2ee1f11fa Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sat, 12 Dec 2020 13:31:03 +0100
|
|
||||||
Subject: [PATCH 1/8] PPP
|
|
||||||
|
|
||||||
---
|
|
||||||
arch/arm/mach-rockchip/rk3399/Kconfig | 7 ++
|
|
||||||
board/pine64/pinephone-pro-rk3399/Kconfig | 15 +++
|
|
||||||
board/pine64/pinephone-pro-rk3399/MAINTAINERS | 8 ++
|
|
||||||
board/pine64/pinephone-pro-rk3399/Makefile | 1 +
|
|
||||||
.../pinephone-pro-rk3399.c | 56 +++++++++++
|
|
||||||
configs/pinephone-pro-rk3399_defconfig | 92 +++++++++++++++++++
|
|
||||||
6 files changed, 179 insertions(+)
|
|
||||||
create mode 100644 board/pine64/pinephone-pro-rk3399/Kconfig
|
|
||||||
create mode 100644 board/pine64/pinephone-pro-rk3399/MAINTAINERS
|
|
||||||
create mode 100644 board/pine64/pinephone-pro-rk3399/Makefile
|
|
||||||
create mode 100644 board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
|
|
||||||
create mode 100644 configs/pinephone-pro-rk3399_defconfig
|
|
||||||
|
|
||||||
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
index 17628f9171..35b1125906 100644
|
|
||||||
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
@@ -28,6 +28,13 @@ config TARGET_PINEBOOK_PRO_RK3399
|
|
||||||
with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
|
|
||||||
1920*1080 screen and all the usual laptop features.
|
|
||||||
|
|
||||||
+config TARGET_PINEPHONE_PRO_RK3399
|
|
||||||
+ bool "PinePhone Pro"
|
|
||||||
+ help
|
|
||||||
+ PinePhone Pro is a phone based on the Rockchip rk3399 SoC
|
|
||||||
+ with 4Gb RAM, onboard eMMC, USB-C, a headphone jack,
|
|
||||||
+ 720x1440 screen and an external Quectel USB modem.
|
|
||||||
+
|
|
||||||
config TARGET_PUMA_RK3399
|
|
||||||
bool "Theobroma Systems RK3399-Q7 (Puma)"
|
|
||||||
help
|
|
||||||
diff --git a/board/pine64/pinephone-pro-rk3399/Kconfig b/board/pine64/pinephone-pro-rk3399/Kconfig
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..13d6465ae6
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/pine64/pinephone-pro-rk3399/Kconfig
|
|
||||||
@@ -0,0 +1,15 @@
|
|
||||||
+if TARGET_PINEPHONE_PRO_RK3399
|
|
||||||
+
|
|
||||||
+config SYS_BOARD
|
|
||||||
+ default "pinephone-pro-rk3399"
|
|
||||||
+
|
|
||||||
+config SYS_VENDOR
|
|
||||||
+ default "pine64"
|
|
||||||
+
|
|
||||||
+config SYS_CONFIG_NAME
|
|
||||||
+ default "pinephone-pro-rk3399"
|
|
||||||
+
|
|
||||||
+config BOARD_SPECIFIC_OPTIONS
|
|
||||||
+ def_bool y
|
|
||||||
+
|
|
||||||
+endif
|
|
||||||
diff --git a/board/pine64/pinephone-pro-rk3399/MAINTAINERS b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..227c1c0bea
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/pine64/pinephone-pro-rk3399/MAINTAINERS
|
|
||||||
@@ -0,0 +1,8 @@
|
|
||||||
+PINEBOOK_PRO
|
|
||||||
+M: Peter Robinson <pbrobinson@gmail.com>
|
|
||||||
+S: Maintained
|
|
||||||
+F: board/pine64/rk3399-pinebook-pro/
|
|
||||||
+F: include/configs/rk3399-pinebook-pro.h
|
|
||||||
+F: arch/arm/dts/rk3399-pinebook-pro.dts
|
|
||||||
+F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
|
|
||||||
+F: configs/pinebook-pro-rk3399_defconfig
|
|
||||||
diff --git a/board/pine64/pinephone-pro-rk3399/Makefile b/board/pine64/pinephone-pro-rk3399/Makefile
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..8d9203053e
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/pine64/pinephone-pro-rk3399/Makefile
|
|
||||||
@@ -0,0 +1 @@
|
|
||||||
+obj-y += pinephone-pro-rk3399.o
|
|
||||||
diff --git a/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..d79084614f
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/board/pine64/pinephone-pro-rk3399/pinephone-pro-rk3399.c
|
|
||||||
@@ -0,0 +1,56 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
|
||||||
+/*
|
|
||||||
+ * (C) Copyright 2019 Vasily Khoruzhick <anarsoul@gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include <common.h>
|
|
||||||
+#include <dm.h>
|
|
||||||
+#include <init.h>
|
|
||||||
+#include <syscon.h>
|
|
||||||
+#include <asm/io.h>
|
|
||||||
+#include <asm/arch-rockchip/clock.h>
|
|
||||||
+#include <asm/arch-rockchip/grf_rk3399.h>
|
|
||||||
+#include <asm/arch-rockchip/hardware.h>
|
|
||||||
+#include <asm/arch-rockchip/misc.h>
|
|
||||||
+
|
|
||||||
+#define GRF_IO_VSEL_BT565_SHIFT 0
|
|
||||||
+#define PMUGRF_CON0_VSEL_SHIFT 8
|
|
||||||
+
|
|
||||||
+#ifdef CONFIG_MISC_INIT_R
|
|
||||||
+static void setup_iodomain(void)
|
|
||||||
+{
|
|
||||||
+ struct rk3399_grf_regs *grf =
|
|
||||||
+ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
||||||
+ struct rk3399_pmugrf_regs *pmugrf =
|
|
||||||
+ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
|
|
||||||
+
|
|
||||||
+ /* BT565 is in 1.8v domain */
|
|
||||||
+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
|
|
||||||
+
|
|
||||||
+ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
|
|
||||||
+ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+int misc_init_r(void)
|
|
||||||
+{
|
|
||||||
+ const u32 cpuid_offset = 0x7;
|
|
||||||
+ const u32 cpuid_length = 0x10;
|
|
||||||
+ u8 cpuid[cpuid_length];
|
|
||||||
+ int ret;
|
|
||||||
+
|
|
||||||
+ setup_iodomain();
|
|
||||||
+
|
|
||||||
+ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ ret = rockchip_cpuid_set(cpuid, cpuid_length);
|
|
||||||
+ if (ret)
|
|
||||||
+ return ret;
|
|
||||||
+
|
|
||||||
+ ret = rockchip_setup_macaddr();
|
|
||||||
+
|
|
||||||
+ return ret;
|
|
||||||
+}
|
|
||||||
+
|
|
||||||
+#endif
|
|
||||||
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..320ce65ffb
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/configs/pinephone-pro-rk3399_defconfig
|
|
||||||
@@ -0,0 +1,92 @@
|
|
||||||
+CONFIG_ARM=y
|
|
||||||
+CONFIG_ARCH_ROCKCHIP=y
|
|
||||||
+CONFIG_SYS_TEXT_BASE=0x00200000
|
|
||||||
+CONFIG_NR_DRAM_BANKS=1
|
|
||||||
+CONFIG_ENV_SIZE=0x8000
|
|
||||||
+CONFIG_ROCKCHIP_RK3399=y
|
|
||||||
+CONFIG_TARGET_PINEPHONE_PRO_RK3399=y
|
|
||||||
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
|
|
||||||
+CONFIG_DEBUG_UART_CLOCK=24000000
|
|
||||||
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
||||||
+CONFIG_SPL_SPI_SUPPORT=y
|
|
||||||
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
|
|
||||||
+CONFIG_DEBUG_UART=y
|
|
||||||
+CONFIG_BOOTDELAY=3
|
|
||||||
+CONFIG_USE_PREBOOT=y
|
|
||||||
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinephone-pro.dtb"
|
|
||||||
+CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
||||||
+CONFIG_MISC_INIT_R=y
|
|
||||||
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
||||||
+CONFIG_SPL_STACK_R=y
|
|
||||||
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
|
|
||||||
+CONFIG_SPL_MTD_SUPPORT=y
|
|
||||||
+CONFIG_SPL_SPI_LOAD=y
|
|
||||||
+CONFIG_TPL=y
|
|
||||||
+CONFIG_CMD_BOOTZ=y
|
|
||||||
+CONFIG_CMD_GPIO=y
|
|
||||||
+CONFIG_CMD_GPT=y
|
|
||||||
+CONFIG_CMD_I2C=y
|
|
||||||
+CONFIG_CMD_MMC=y
|
|
||||||
+CONFIG_CMD_PCI=y
|
|
||||||
+CONFIG_CMD_USB=y
|
|
||||||
+# CONFIG_CMD_SETEXPR is not set
|
|
||||||
+CONFIG_CMD_TIME=y
|
|
||||||
+CONFIG_CMD_PMIC=y
|
|
||||||
+CONFIG_CMD_REGULATOR=y
|
|
||||||
+CONFIG_SPL_OF_CONTROL=y
|
|
||||||
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
||||||
+CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
||||||
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
||||||
+CONFIG_ROCKCHIP_GPIO=y
|
|
||||||
+CONFIG_SYS_I2C_ROCKCHIP=y
|
|
||||||
+CONFIG_DM_KEYBOARD=y
|
|
||||||
+CONFIG_LED=y
|
|
||||||
+CONFIG_LED_GPIO=y
|
|
||||||
+CONFIG_MISC=y
|
|
||||||
+CONFIG_ROCKCHIP_EFUSE=y
|
|
||||||
+CONFIG_MMC_DW=y
|
|
||||||
+CONFIG_MMC_DW_ROCKCHIP=y
|
|
||||||
+CONFIG_MMC_SDHCI=y
|
|
||||||
+CONFIG_MMC_SDHCI_SDMA=y
|
|
||||||
+CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
||||||
+CONFIG_SF_DEFAULT_SPEED=20000000
|
|
||||||
+CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
||||||
+CONFIG_SPI_FLASH_WINBOND=y
|
|
||||||
+CONFIG_DM_ETH=y
|
|
||||||
+CONFIG_NVME=y
|
|
||||||
+CONFIG_PCI=y
|
|
||||||
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
||||||
+CONFIG_PHY_ROCKCHIP_TYPEC=y
|
|
||||||
+CONFIG_DM_PMIC_FAN53555=y
|
|
||||||
+CONFIG_PMIC_RK8XX=y
|
|
||||||
+CONFIG_REGULATOR_PWM=y
|
|
||||||
+CONFIG_REGULATOR_RK8XX=y
|
|
||||||
+CONFIG_PWM_ROCKCHIP=y
|
|
||||||
+CONFIG_RAM_RK3399_LPDDR4=y
|
|
||||||
+CONFIG_DM_RESET=y
|
|
||||||
+CONFIG_DM_RNG=y
|
|
||||||
+CONFIG_RNG_ROCKCHIP=y
|
|
||||||
+CONFIG_BAUDRATE=1500000
|
|
||||||
+CONFIG_DEBUG_UART_SHIFT=2
|
|
||||||
+CONFIG_ROCKCHIP_SPI=y
|
|
||||||
+CONFIG_SYSRESET=y
|
|
||||||
+CONFIG_USB=y
|
|
||||||
+CONFIG_USB_XHCI_HCD=y
|
|
||||||
+CONFIG_USB_XHCI_DWC3=y
|
|
||||||
+CONFIG_USB_EHCI_HCD=y
|
|
||||||
+CONFIG_USB_EHCI_GENERIC=y
|
|
||||||
+CONFIG_USB_OHCI_HCD=y
|
|
||||||
+CONFIG_USB_OHCI_GENERIC=y
|
|
||||||
+CONFIG_USB_DWC3=y
|
|
||||||
+CONFIG_USB_DWC3_GENERIC=y
|
|
||||||
+CONFIG_USB_KEYBOARD=y
|
|
||||||
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
|
||||||
+CONFIG_USB_HOST_ETHER=y
|
|
||||||
+CONFIG_USB_ETHER_ASIX=y
|
|
||||||
+CONFIG_USB_ETHER_RTL8152=y
|
|
||||||
+CONFIG_DM_VIDEO=y
|
|
||||||
+CONFIG_DISPLAY=y
|
|
||||||
+CONFIG_VIDEO_ROCKCHIP=y
|
|
||||||
+CONFIG_DISPLAY_ROCKCHIP_EDP=y
|
|
||||||
+CONFIG_SPL_TINY_MEMSET=y
|
|
||||||
+CONFIG_ERRNO_STR=y
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
@ -1,589 +0,0 @@
|
|||||||
From 98b43f8c80a3ce16363f6a386b23bda10a738ffa Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 19:21:12 +0100
|
|
||||||
Subject: [PATCH 2/8] Add ppp dt
|
|
||||||
|
|
||||||
---
|
|
||||||
arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 43 ++
|
|
||||||
arch/arm/dts/rk3399-pinephone-pro.dts | 520 +++++++++++++++++++
|
|
||||||
2 files changed, 563 insertions(+)
|
|
||||||
create mode 100644 arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
create mode 100644 arch/arm/dts/rk3399-pinephone-pro.dts
|
|
||||||
|
|
||||||
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..7a058477db
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
@@ -0,0 +1,43 @@
|
|
||||||
+// SPDX-License-Identifier: GPL-2.0+
|
|
||||||
+/*
|
|
||||||
+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#include "rk3399-u-boot.dtsi"
|
|
||||||
+#include "rk3399-sdram-lpddr4-100.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ aliases {
|
|
||||||
+ spi0 = &spi1;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ chosen {
|
|
||||||
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &spiflash, &sdmmc;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ config {
|
|
||||||
+ u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c0 {
|
|
||||||
+ u-boot,dm-pre-reloc;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&rk818 {
|
|
||||||
+ u-boot,dm-pre-reloc;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&rng {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdhci {
|
|
||||||
+ max-frequency = <25000000>;
|
|
||||||
+ u-boot,dm-pre-reloc;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc {
|
|
||||||
+ max-frequency = <20000000>;
|
|
||||||
+ u-boot,dm-pre-reloc;
|
|
||||||
+};
|
|
||||||
diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..78d4760c8e
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/arch/arm/dts/rk3399-pinephone-pro.dts
|
|
||||||
@@ -0,0 +1,520 @@
|
|
||||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
||||||
+/*
|
|
||||||
+ * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+/dts-v1/;
|
|
||||||
+#include "rk3399.dtsi"
|
|
||||||
+#include "rk3399-opp.dtsi"
|
|
||||||
+
|
|
||||||
+/ {
|
|
||||||
+ model = "Pine64 PinePhonePro";
|
|
||||||
+ compatible = "pine64,pinephonepro", "rockchip,rk3399";
|
|
||||||
+
|
|
||||||
+ chosen {
|
|
||||||
+ stdout-path = "serial2:1500000n8";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ sdio_pwrseq: sdio-pwrseq {
|
|
||||||
+ compatible = "mmc-pwrseq-simple";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ /* Power tree */
|
|
||||||
+ /* Root power source */
|
|
||||||
+ vcc_sysin: vcc-sysin {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc_sysin";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ /* Main 3.3v supply */
|
|
||||||
+ vcc3v3_sys: vcc3v3-sys {
|
|
||||||
+ compatible = "regulator-fixed";
|
|
||||||
+ regulator-name = "vcc3v3_sys";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ vin-supply = <&vcc_sysin>;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_l0 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_l>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_l1 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_l>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_l2 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_l>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_l3 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_l>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_b0 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_b>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&cpu_b1 {
|
|
||||||
+ cpu-supply = <&vdd_cpu_b>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&emmc_phy {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&gpu {
|
|
||||||
+ mali-supply = <&vdd_gpu>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c0 {
|
|
||||||
+ clock-frequency = <400000>;
|
|
||||||
+ i2c-scl-rising-time-ns = <168>;
|
|
||||||
+ i2c-scl-falling-time-ns = <4>;
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ rk818: pmic@1c {
|
|
||||||
+ compatible = "rockchip,rk818";
|
|
||||||
+ reg = <0x1c>;
|
|
||||||
+ interrupt-parent = <&gpio1>;
|
|
||||||
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ #clock-cells = <1>;
|
|
||||||
+ clock-output-names = "xin32k", "rk808-clkout2";
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&pmic_int_l>;
|
|
||||||
+ rockchip,system-power-controller;
|
|
||||||
+ wakeup-source;
|
|
||||||
+
|
|
||||||
+ vcc1-supply = <&vcc_sysin>;
|
|
||||||
+ vcc2-supply = <&vcc_sysin>;
|
|
||||||
+ vcc3-supply = <&vcc_sysin>;
|
|
||||||
+ vcc4-supply = <&vcc_sysin>;
|
|
||||||
+ vcc6-supply = <&vcc_sysin>;
|
|
||||||
+ vcc7-supply = <&vcc3v3_sys>;
|
|
||||||
+ vcc8-supply = <&vcc_sysin>;
|
|
||||||
+ vcc9-supply = <&vcc3v3_sys>;
|
|
||||||
+
|
|
||||||
+ regulators {
|
|
||||||
+ vdd_cpu_l: DCDC_REG1 {
|
|
||||||
+ regulator-name = "vdd_cpu_1";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <750000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_center: DCDC_REG2 {
|
|
||||||
+ regulator-name = "vdd_center";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <800000>;
|
|
||||||
+ regulator-max-microvolt = <1350000>;
|
|
||||||
+ regulator-ramp-delay = <6001>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_ddr: DCDC_REG3 {
|
|
||||||
+ regulator-name = "vcc_ddr";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v8: DCDC_REG4 {
|
|
||||||
+ regulator-name = "vcc_1v8";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1800000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca3v0_codec: LDO_REG1 {
|
|
||||||
+ regulator-name = "vcca3v0_codec";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3000000>;
|
|
||||||
+ regulator-max-microvolt = <3000000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v0_touch: LDO_REG2 {
|
|
||||||
+ regulator-name = "vcc3v0_touch";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3000000>;
|
|
||||||
+ regulator-max-microvolt = <3000000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcca1v8_codec: LDO_REG3 {
|
|
||||||
+ regulator-name = "vcca1v8_codec";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_power_on: LDO_REG4 {
|
|
||||||
+ regulator-name = "vcc_power_on";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_3v0: LDO_REG5 {
|
|
||||||
+ regulator-name = "vcc_3v0";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3000000>;
|
|
||||||
+ regulator-max-microvolt = <3000000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3000000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_1v5: LDO_REG6 {
|
|
||||||
+ regulator-name = "vcc_1v5";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1500000>;
|
|
||||||
+ regulator-max-microvolt = <1500000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <1500000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc1v8_dvp: LDO_REG7 {
|
|
||||||
+ regulator-name = "vcc1v8_dvp";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <1800000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_s3: LDO_REG8 {
|
|
||||||
+ regulator-name = "vcc3v3_s3";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <3300000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc_sd: LDO_REG9 {
|
|
||||||
+ regulator-name = "vcc_sd";
|
|
||||||
+ regulator-min-microvolt = <1800000>;
|
|
||||||
+ regulator-max-microvolt = <3300000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <3300000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vcc3v3_s0: SWITCH_REG {
|
|
||||||
+ regulator-name = "vcc3v3_s0";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ boost_otg: DCDC_BOOST {
|
|
||||||
+ regulator-name = "boost_otg";
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+ regulator-min-microvolt = <5000000>;
|
|
||||||
+ regulator-max-microvolt = <5000000>;
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-on-in-suspend;
|
|
||||||
+ regulator-suspend-microvolt = <5000000>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ otg_switch: OTG_SWITCH {
|
|
||||||
+ regulator-name = "otg_switch";
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_cpu_b: regulator@40 {
|
|
||||||
+ compatible = "silergy,syr827";
|
|
||||||
+ reg = <0x40>;
|
|
||||||
+ fcs,suspend-voltage-selector = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vsel1_pin>;
|
|
||||||
+ regulator-name = "vdd_cpu_b";
|
|
||||||
+ regulator-min-microvolt = <712500>;
|
|
||||||
+ regulator-max-microvolt = <1500000>;
|
|
||||||
+ regulator-ramp-delay = <1000>;
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vdd_gpu: regulator@41 {
|
|
||||||
+ compatible = "silergy,syr828";
|
|
||||||
+ reg = <0x41>;
|
|
||||||
+ fcs,suspend-voltage-selector = <1>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&vsel2_pin>;
|
|
||||||
+ regulator-name = "vdd_gpu";
|
|
||||||
+ regulator-min-microvolt = <712500>;
|
|
||||||
+ regulator-max-microvolt = <1500000>;
|
|
||||||
+ regulator-ramp-delay = <1000>;
|
|
||||||
+ regulator-always-on;
|
|
||||||
+ regulator-boot-on;
|
|
||||||
+
|
|
||||||
+ regulator-state-mem {
|
|
||||||
+ regulator-off-in-suspend;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c1 {
|
|
||||||
+ i2c-scl-rising-time-ns = <300>;
|
|
||||||
+ i2c-scl-falling-time-ns = <15>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c3 {
|
|
||||||
+ i2c-scl-rising-time-ns = <450>;
|
|
||||||
+ i2c-scl-falling-time-ns = <15>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&i2c4 {
|
|
||||||
+ i2c-scl-rising-time-ns = <600>;
|
|
||||||
+ i2c-scl-falling-time-ns = <20>;
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ fusb0: typec-portc@22 {
|
|
||||||
+ compatible = "fcs,fusb302";
|
|
||||||
+ reg = <0x22>;
|
|
||||||
+ interrupt-parent = <&gpio1>;
|
|
||||||
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&fusb0_int>;
|
|
||||||
+ status = "okay";
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&io_domains {
|
|
||||||
+ status = "okay";
|
|
||||||
+
|
|
||||||
+ bt656-supply = <&vcc1v8_dvp>;
|
|
||||||
+ audio-supply = <&vcca1v8_codec>;
|
|
||||||
+ sdmmc-supply = <&vcc_sd>;
|
|
||||||
+ gpio1830-supply = <&vcc_3v0>;
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pmu_io_domains {
|
|
||||||
+ pmu1830-supply = <&vcc_3v0>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pinctrl {
|
|
||||||
+ bt {
|
|
||||||
+ bt_enable_h: bt-enable-h {
|
|
||||||
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ bt_host_wake_l: bt-host-wake-l {
|
|
||||||
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ bt_wake_l: bt-wake-l {
|
|
||||||
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ buttons {
|
|
||||||
+ pwrbtn: pwrbtn {
|
|
||||||
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ fusb302x {
|
|
||||||
+ fusb0_int: fusb0-int {
|
|
||||||
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ leds {
|
|
||||||
+ work_led_pin: work-led-pin {
|
|
||||||
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ diy_led_pin: diy-led-pin {
|
|
||||||
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie {
|
|
||||||
+ pcie_perst: pcie-perst {
|
|
||||||
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pcie_pwr_en: pcie-pwr-en {
|
|
||||||
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ pmic {
|
|
||||||
+ pmic_int_l: pmic-int-l {
|
|
||||||
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vsel1_pin: vsel1-pin {
|
|
||||||
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ vsel2_pin: vsel2-pin {
|
|
||||||
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ sdcard {
|
|
||||||
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
|
|
||||||
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ sdio-pwrseq {
|
|
||||||
+ wifi_enable_h: wifi-enable-h {
|
|
||||||
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ usb-typec {
|
|
||||||
+ vcc5v0_typec_en: vcc5v0_typec_en {
|
|
||||||
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+
|
|
||||||
+ usb2 {
|
|
||||||
+ vcc5v0_host_en: vcc5v0-host-en {
|
|
||||||
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
||||||
+ };
|
|
||||||
+ };
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm0 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm1 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&pwm2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdio0 {
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ cap-sdio-irq;
|
|
||||||
+ disable-wp;
|
|
||||||
+ keep-power-in-suspend;
|
|
||||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
|
||||||
+ non-removable;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
|
||||||
+ sd-uhs-sdr104;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdmmc {
|
|
||||||
+ bus-width = <4>;
|
|
||||||
+ cap-sd-highspeed;
|
|
||||||
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
|
||||||
+ disable-wp;
|
|
||||||
+ max-frequency = <150000000>;
|
|
||||||
+ pinctrl-names = "default";
|
|
||||||
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
|
||||||
+ vmmc-supply = <&vcc3v3_s3>;
|
|
||||||
+ vqmmc-supply = <&vcc_1v8>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&sdhci {
|
|
||||||
+ bus-width = <8>;
|
|
||||||
+ mmc-hs200-1_8v;
|
|
||||||
+ non-removable;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&tsadc {
|
|
||||||
+ /* tshut mode 0:CRU 1:GPIO */
|
|
||||||
+ rockchip,hw-tshut-mode = <1>;
|
|
||||||
+ /* tshut polarity 0:LOW 1:HIGH */
|
|
||||||
+ rockchip,hw-tshut-polarity = <1>;
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&uart2 {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vopb {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vopb_mmu {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vopl {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
+
|
|
||||||
+&vopl_mmu {
|
|
||||||
+ status = "okay";
|
|
||||||
+};
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
@ -1,25 +0,0 @@
|
|||||||
From 6e64cdb39e4452315cf9a4d1e9e89691403c3089 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 19:36:14 +0100
|
|
||||||
Subject: [PATCH 3/8] Config changes
|
|
||||||
|
|
||||||
---
|
|
||||||
configs/pinephone-pro-rk3399_defconfig | 2 --
|
|
||||||
1 file changed, 2 deletions(-)
|
|
||||||
|
|
||||||
diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
|
|
||||||
index 320ce65ffb..1c2e7f278d 100644
|
|
||||||
--- a/configs/pinephone-pro-rk3399_defconfig
|
|
||||||
+++ b/configs/pinephone-pro-rk3399_defconfig
|
|
||||||
@@ -53,8 +53,6 @@ CONFIG_SF_DEFAULT_SPEED=20000000
|
|
||||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
||||||
CONFIG_SPI_FLASH_WINBOND=y
|
|
||||||
CONFIG_DM_ETH=y
|
|
||||||
-CONFIG_NVME=y
|
|
||||||
-CONFIG_PCI=y
|
|
||||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
||||||
CONFIG_PHY_ROCKCHIP_TYPEC=y
|
|
||||||
CONFIG_DM_PMIC_FAN53555=y
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
|
|
||||||
@ -1,24 +0,0 @@
|
|||||||
From 4101d635fb8d82a5f6e63decccddfcfdea9f081e Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 19:48:37 +0100
|
|
||||||
Subject: [PATCH 4/8] Add kconfig include
|
|
||||||
|
|
||||||
---
|
|
||||||
arch/arm/mach-rockchip/rk3399/Kconfig | 1 +
|
|
||||||
1 file changed, 1 insertion(+)
|
|
||||||
|
|
||||||
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
index 35b1125906..3ba603ca80 100644
|
|
||||||
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
|
|
||||||
@@ -161,6 +161,7 @@ endif # BOOTCOUNT_LIMIT
|
|
||||||
source "board/firefly/roc-pc-rk3399/Kconfig"
|
|
||||||
source "board/google/gru/Kconfig"
|
|
||||||
source "board/pine64/pinebook-pro-rk3399/Kconfig"
|
|
||||||
+source "board/pine64/pinephone-pro-rk3399/Kconfig"
|
|
||||||
source "board/pine64/rockpro64_rk3399/Kconfig"
|
|
||||||
source "board/rockchip/evb_rk3399/Kconfig"
|
|
||||||
source "board/theobroma-systems/puma_rk3399/Kconfig"
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
|
|
||||||
@ -1,41 +0,0 @@
|
|||||||
From 13c8c6945856e57958fdf7e4ef338c21e1199f19 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 19:52:09 +0100
|
|
||||||
Subject: [PATCH 5/8] Add pinephone-pro-rk3399.h
|
|
||||||
|
|
||||||
---
|
|
||||||
include/configs/pinephone-pro-rk3399.h | 22 ++++++++++++++++++++++
|
|
||||||
1 file changed, 22 insertions(+)
|
|
||||||
create mode 100644 include/configs/pinephone-pro-rk3399.h
|
|
||||||
|
|
||||||
diff --git a/include/configs/pinephone-pro-rk3399.h b/include/configs/pinephone-pro-rk3399.h
|
|
||||||
new file mode 100644
|
|
||||||
index 0000000000..aaaa344839
|
|
||||||
--- /dev/null
|
|
||||||
+++ b/include/configs/pinephone-pro-rk3399.h
|
|
||||||
@@ -0,0 +1,22 @@
|
|
||||||
+/* SPDX-License-Identifier: GPL-2.0+ */
|
|
||||||
+/*
|
|
||||||
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
|
|
||||||
+ * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
|
|
||||||
+ */
|
|
||||||
+
|
|
||||||
+#ifndef __PINEPHONE_PRO_RK3399_H
|
|
||||||
+#define __PINEPHONE_PRO_RK3399_H
|
|
||||||
+
|
|
||||||
+#define ROCKCHIP_DEVICE_SETTINGS \
|
|
||||||
+ "stdin=serial,usbkbd\0" \
|
|
||||||
+ "stdout=serial,vidconsole\0" \
|
|
||||||
+ "stderr=serial,vidconsole\0"
|
|
||||||
+
|
|
||||||
+#include <configs/rk3399_common.h>
|
|
||||||
+
|
|
||||||
+#define SDRAM_BANK_SIZE (2UL << 30)
|
|
||||||
+
|
|
||||||
+#define CONFIG_USB_OHCI_NEW
|
|
||||||
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
||||||
+
|
|
||||||
+#endif
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
|
|
||||||
@ -1,23 +0,0 @@
|
|||||||
From 3e8d6e4d57dd15acf104a8f11ff18833f8d7adc7 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 19:57:49 +0100
|
|
||||||
Subject: [PATCH 6/8] Added dts to makefile
|
|
||||||
|
|
||||||
---
|
|
||||||
arch/arm/dts/Makefile | 1 +
|
|
||||||
1 file changed, 1 insertion(+)
|
|
||||||
|
|
||||||
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
|
||||||
index e2e8a5fb7a..ff07ae0270 100644
|
|
||||||
--- a/arch/arm/dts/Makefile
|
|
||||||
+++ b/arch/arm/dts/Makefile
|
|
||||||
@@ -135,6 +135,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
|
|
||||||
rk3399-nanopi-r4s.dtb \
|
|
||||||
rk3399-orangepi.dtb \
|
|
||||||
rk3399-pinebook-pro.dtb \
|
|
||||||
+ rk3399-pinephone-pro.dtb \
|
|
||||||
rk3399-puma-haikou.dtb \
|
|
||||||
rk3399-roc-pc.dtb \
|
|
||||||
rk3399-roc-pc-mezzanine.dtb \
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
@ -1,24 +0,0 @@
|
|||||||
From 19150d65b1bed6831ba92a4cf3e7262518f1049f Mon Sep 17 00:00:00 2001
|
|
||||||
From: Martijn Braam <martijn@brixit.nl>
|
|
||||||
Date: Sun, 13 Dec 2020 20:02:56 +0100
|
|
||||||
Subject: [PATCH 7/8] u-boot.dtsi fixes
|
|
||||||
|
|
||||||
---
|
|
||||||
arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
index 7a058477db..e52263aafe 100644
|
|
||||||
--- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
+++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
|
|
||||||
@@ -12,7 +12,7 @@
|
|
||||||
};
|
|
||||||
|
|
||||||
chosen {
|
|
||||||
- u-boot,spl-boot-order = "same-as-spl", &sdhci, &spiflash, &sdmmc;
|
|
||||||
+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
|
|
||||||
};
|
|
||||||
|
|
||||||
config {
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
@ -1,44 +0,0 @@
|
|||||||
From b212ad24a604b00b240add35516b7381965deb31 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Alex Bee <knaerzche@gmail.com>
|
|
||||||
Date: Thu, 17 Jun 2021 11:01:12 +0200
|
|
||||||
Subject: [PATCH] rockchip: Fix MMC boot order
|
|
||||||
|
|
||||||
Basically all, i.e. rk3036.dtsi, rk3128.dtsi, rk3xxx.dtsi, rk322x.dtsi,
|
|
||||||
rk3288.dtsi, rk3308-u-boot.dtsi, rk3328-u-boot.dtsi, rk3399-u-boot.dtsi
|
|
||||||
and px30-u-boot.dtsi Rockchip SoC devicetrees which have mmc indexes
|
|
||||||
are defining eMMC as mmc0 and sdmmc as mmc1.
|
|
||||||
This means that the rule to try to boot from the SD card first is ignored,
|
|
||||||
which as per comment is what we want and is important for distros, which
|
|
||||||
rely on that.
|
|
||||||
|
|
||||||
Fix this by setting the correct mmc index, i.e. first from mmc1 (SD card),
|
|
||||||
second from mmc0 (eMMC).
|
|
||||||
|
|
||||||
Signed-off-by: Alex Bee <knaerzche@gmail.com>
|
|
||||||
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
||||||
---
|
|
||||||
include/configs/rockchip-common.h | 6 +++---
|
|
||||||
1 file changed, 3 insertions(+), 3 deletions(-)
|
|
||||||
|
|
||||||
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
|
|
||||||
index 0b9e24d1db..ba7061a287 100644
|
|
||||||
--- a/include/configs/rockchip-common.h
|
|
||||||
+++ b/include/configs/rockchip-common.h
|
|
||||||
@@ -14,11 +14,11 @@
|
|
||||||
|
|
||||||
#ifndef CONFIG_SPL_BUILD
|
|
||||||
|
|
||||||
-/* First try to boot from SD (index 0), then eMMC (index 1) */
|
|
||||||
+/* First try to boot from SD (index 1), then eMMC (index 0) */
|
|
||||||
#if CONFIG_IS_ENABLED(CMD_MMC)
|
|
||||||
#define BOOT_TARGET_MMC(func) \
|
|
||||||
- func(MMC, mmc, 0) \
|
|
||||||
- func(MMC, mmc, 1)
|
|
||||||
+ func(MMC, mmc, 1) \
|
|
||||||
+ func(MMC, mmc, 0)
|
|
||||||
#else
|
|
||||||
#define BOOT_TARGET_MMC(func)
|
|
||||||
#endif
|
|
||||||
--
|
|
||||||
GitLab
|
|
||||||
|
|
||||||
@ -1,28 +0,0 @@
|
|||||||
From f97401137daa1cb75532c373bbcb5011f1e03585 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Dan Johansen <strit@manjaro.org>
|
|
||||||
Date: Sun, 10 Oct 2021 20:19:02 +0200
|
|
||||||
Subject: [PATCH] Correct boot order to be USB -> SD -> eMMC
|
|
||||||
|
|
||||||
Signed-off-by: Dan Johansen <strit@manjaro.org>
|
|
||||||
---
|
|
||||||
include/configs/rockchip-common.h | 2 +-
|
|
||||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
||||||
|
|
||||||
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
|
|
||||||
index ba7061a287..5dc92373b2 100644
|
|
||||||
--- a/include/configs/rockchip-common.h
|
|
||||||
+++ b/include/configs/rockchip-common.h
|
|
||||||
@@ -55,9 +55,9 @@
|
|
||||||
|
|
||||||
#ifdef CONFIG_ROCKCHIP_RK3399
|
|
||||||
#define BOOT_TARGET_DEVICES(func) \
|
|
||||||
+ BOOT_TARGET_USB(func) \
|
|
||||||
BOOT_TARGET_MMC(func) \
|
|
||||||
BOOT_TARGET_NVME(func) \
|
|
||||||
- BOOT_TARGET_USB(func) \
|
|
||||||
BOOT_TARGET_PXE(func) \
|
|
||||||
BOOT_TARGET_DHCP(func) \
|
|
||||||
BOOT_TARGET_SF(func)
|
|
||||||
--
|
|
||||||
2.33.0
|
|
||||||
|
|
||||||
@ -1,39 +0,0 @@
|
|||||||
notice_uboot() {
|
|
||||||
echo "New version of U-Boot firmware can be flashed to your microSD card"
|
|
||||||
echo "or eMMC module. You can do that by running:"
|
|
||||||
echo "# dd if=/boot/idbloader.img of=/dev/mmcblkX seek=64 conv=notrunc,fsync"
|
|
||||||
echo "# dd if=/boot/u-boot.itb of=/dev/mmcblkX seek=16384 conv=notrunc,fsync"
|
|
||||||
}
|
|
||||||
|
|
||||||
create_config() {
|
|
||||||
mkdir -p /boot/extlinux
|
|
||||||
echo "LABEL Manjaro ARM
|
|
||||||
KERNEL /Image
|
|
||||||
FDT /dtbs/rockchip/rk3399-pinephone-pro.dtb
|
|
||||||
APPEND initrd=/initramfs-linux.img console=ttyS2,1500000 root=LABEL=ROOT_MNJRO rw rootwait quiet splash plymouth.ignore-serial-consoles" > /boot/extlinux/extlinux.conf
|
|
||||||
}
|
|
||||||
|
|
||||||
post_install() {
|
|
||||||
notice_uboot
|
|
||||||
if [ -f /boot/extlinux/extlinux.conf.pacsave ]; then
|
|
||||||
mv /boot/extlinux/extlinux.conf.pacsave /boot/extlinux/extlinux.conf
|
|
||||||
fi
|
|
||||||
if [ -f /boot/extlinux/extlinux.conf ]; then
|
|
||||||
echo "Keeping old extlinux.conf file..."
|
|
||||||
else
|
|
||||||
create_config
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
post_upgrade() {
|
|
||||||
notice_uboot
|
|
||||||
if [ -f /boot/extlinux/extlinux.conf.pacsave ]; then
|
|
||||||
mv /boot/extlinux/extlinux.conf.pacsave /boot/extlinux/extlinux.conf
|
|
||||||
fi
|
|
||||||
if [ -f /boot/extlinux/extlinux.conf ]; then
|
|
||||||
echo "Keeping old extlinux.conf file..."
|
|
||||||
else
|
|
||||||
create_config
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
@ -1,121 +0,0 @@
|
|||||||
# Copyright 1999-2021 Gentoo Authors
|
|
||||||
# Distributed under the terms of the GNU General Public License v2
|
|
||||||
|
|
||||||
EAPI=8
|
|
||||||
|
|
||||||
inherit toolchain-funcs
|
|
||||||
|
|
||||||
PKGREL="4"
|
|
||||||
FIRMWAREVERSION="2.6"
|
|
||||||
COMMMIT="0719bf42931033c3109ecc6357e8adb567cb637b"
|
|
||||||
MY_P="u-boot-${COMMMIT}"
|
|
||||||
DESCRIPTION="utilities for working with Das U-Boot for the PinePhone Pro"
|
|
||||||
HOMEPAGE="https://www.denx.de/wiki/U-Boot/WebHome"
|
|
||||||
SRC_URI="
|
|
||||||
https://source.denx.de/u-boot/u-boot/-/archive/${COMMMIT}/u-boot-${COMMMIT}.tar.gz -> u-boot-${PV}.tar.gz
|
|
||||||
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot/trusted-firmware-a-${FIRMWAREVERSION}.tar.gz
|
|
||||||
"
|
|
||||||
|
|
||||||
S="${WORKDIR}/${MY_P}"
|
|
||||||
|
|
||||||
LICENSE="GPL-2"
|
|
||||||
SLOT="0"
|
|
||||||
KEYWORDS="~arm64"
|
|
||||||
IUSE="envtools"
|
|
||||||
|
|
||||||
|
|
||||||
RDEPEND="dev-libs/openssl:="
|
|
||||||
DEPEND="${RDEPEND}"
|
|
||||||
BDEPEND="
|
|
||||||
sys-apps/dtc
|
|
||||||
sys-devel/bison
|
|
||||||
sys-devel/flex
|
|
||||||
virtual/pkgconfig
|
|
||||||
"
|
|
||||||
|
|
||||||
src_prepare() {
|
|
||||||
default
|
|
||||||
sed -i 's:\bpkg-config\b:${PKG_CONFIG}:g' \
|
|
||||||
scripts/kconfig/{g,m,n,q}conf-cfg.sh \
|
|
||||||
scripts/kconfig/Makefile \
|
|
||||||
tools/Makefile || die
|
|
||||||
|
|
||||||
#Apply PinePhone Pro patches
|
|
||||||
eapply "${FILESDIR}"/0001-PPP.patch
|
|
||||||
eapply "${FILESDIR}"/0002-Add-ppp-dt.patch
|
|
||||||
eapply "${FILESDIR}"/0003-Config-changes.patch
|
|
||||||
eapply "${FILESDIR}"/0004-Add-kconfig-include.patch
|
|
||||||
eapply "${FILESDIR}"/0005-Add-pinephone-pro-rk3399.h.patch
|
|
||||||
eapply "${FILESDIR}"/0006-Added-dts-to-makefile.patch
|
|
||||||
eapply "${FILESDIR}"/0007-u-boot.dtsi-fixes.patch
|
|
||||||
eapply "${FILESDIR}"/0008-fix-boot-order.patch
|
|
||||||
eapply "${FILESDIR}"/0009-Correct-boot-order-to-be-USB-SD-eMMC.patch
|
|
||||||
}
|
|
||||||
|
|
||||||
src_configure() {
|
|
||||||
tc-export AR BUILD_CC CC PKG_CONFIG
|
|
||||||
}
|
|
||||||
|
|
||||||
src_compile() {
|
|
||||||
cd ${WORKDIR}/trusted-firmware-a-${FIRMWAREVERSION}
|
|
||||||
unset CFLAGS CXXFLAGS CPPFLAGS LDFLAGS
|
|
||||||
make PLAT=rk3399
|
|
||||||
cp build/rk3399/release/bl31/bl31.elf ${S}
|
|
||||||
|
|
||||||
cd ${S}
|
|
||||||
|
|
||||||
# Unset a few KBUILD variables. Bug #540476
|
|
||||||
unset KBUILD_OUTPUT KBUILD_SRC
|
|
||||||
|
|
||||||
local myemakeargs=(
|
|
||||||
AR="${AR}"
|
|
||||||
CC="${CC}"
|
|
||||||
HOSTCC="${BUILD_CC}"
|
|
||||||
HOSTCFLAGS="${CFLAGS} ${CPPFLAGS}"' $(HOSTCPPFLAGS)'
|
|
||||||
HOSTLDFLAGS="${LDFLAGS}"
|
|
||||||
)
|
|
||||||
|
|
||||||
emake "${myemakeargs[@]}" pinephone-pro-rk3399_defconfig
|
|
||||||
|
|
||||||
echo 'CONFIG_IDENT_STRING=" Gentoo"' >> .config
|
|
||||||
echo 'CONFIG_USB_EHCI_HCD=n' >> .config
|
|
||||||
echo 'CONFIG_USB_EHCI_GENERIC=n' >> .config
|
|
||||||
echo 'CONFIG_USB_XHCI_HCD=n' >> .config
|
|
||||||
echo 'CONFIG_USB_XHCI_DWC3=n' >> .config
|
|
||||||
echo 'CONFIG_USB_DWC3=n' >> .config
|
|
||||||
echo 'CONFIG_USB_DWC3_GENERIC=n' >> .config
|
|
||||||
|
|
||||||
|
|
||||||
emake "${myemakeargs[@]}" EXTRAVERSION=-${PKGREL}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
src_test() { :; }
|
|
||||||
|
|
||||||
src_install() {
|
|
||||||
insinto /boot/
|
|
||||||
doins ${S}/u-boot.itb
|
|
||||||
|
|
||||||
insinto /boot/
|
|
||||||
doins ${S}/idbloader.img
|
|
||||||
|
|
||||||
cd tools || die
|
|
||||||
|
|
||||||
if ! use envtools; then
|
|
||||||
dobin bmp_logo dumpimage fdtgrep gen_eth_addr img2srec mkenvimage mkimage
|
|
||||||
fi
|
|
||||||
|
|
||||||
dobin env/fw_printenv
|
|
||||||
|
|
||||||
dosym fw_printenv /usr/bin/fw_setenv
|
|
||||||
|
|
||||||
insinto /etc
|
|
||||||
doins env/fw_env.config
|
|
||||||
|
|
||||||
doman ../doc/mkimage.1
|
|
||||||
}
|
|
||||||
|
|
||||||
pkg_postinst() {
|
|
||||||
einfo "This U-Boot is only to be used for the PinePhone Pro."
|
|
||||||
einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/zImage to the boot partition (replacing the existing Image)."
|
|
||||||
}
|
|
||||||
@ -38,7 +38,6 @@ BDEPEND="
|
|||||||
"
|
"
|
||||||
src_prepare() {
|
src_prepare() {
|
||||||
eapply_user
|
eapply_user
|
||||||
cmake_src_prepare
|
|
||||||
vala_src_prepare
|
vala_src_prepare
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -48,6 +47,7 @@ src_configure() {
|
|||||||
local mycmakeargs+=(
|
local mycmakeargs+=(
|
||||||
"-DVALA_EXECUTABLE=${VALAC}"
|
"-DVALA_EXECUTABLE=${VALAC}"
|
||||||
)
|
)
|
||||||
|
|
||||||
local emesonargs=(
|
local emesonargs=(
|
||||||
-Dconsumer_key_base64=VmY5dG9yRFcyWk93MzJEZmhVdEk5Y3NMOA==
|
-Dconsumer_key_base64=VmY5dG9yRFcyWk93MzJEZmhVdEk5Y3NMOA==
|
||||||
-Dconsumer_secret_base64=MThCRXIxbWRESDQ2Y0podzVtVU13SGUyVGlCRXhPb3BFRHhGYlB6ZkpybG5GdXZaSjI=
|
-Dconsumer_secret_base64=MThCRXIxbWRESDQ2Y0podzVtVU13SGUyVGlCRXhPb3BFRHhGYlB6ZkpybG5GdXZaSjI=
|
||||||
|
|||||||
@ -12,6 +12,6 @@ Add the following content to /etc/portage/repos.conf/gjdwebserver.conf
|
|||||||
[gjdwebserver]
|
[gjdwebserver]
|
||||||
location = /var/db/repos/gjdwebserver
|
location = /var/db/repos/gjdwebserver
|
||||||
sync-type = git
|
sync-type = git
|
||||||
sync-uri = https://github.com/stealthgun/gjdwebserver-overlay.git
|
sync-uri = https://git.gjdwebserver.nl/gjdwebserver/gjdwebserver-overlay
|
||||||
auto-sync = yes
|
auto-sync = yes
|
||||||
```
|
```
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user