gjdwebserver-overlay/dev-embedded/u-boot-pinephone-pro/u-boot-pinephone-pro-2021.01_rc3.ebuild
Gerben Jan Dijkman ab553dab04 Updated Readme
2022-01-01 18:04:48 +01:00

134 lines
3.4 KiB
Bash

# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
inherit toolchain-funcs
PKGREL="4"
FIRMWAREVERSION="2.6"
COMMMIT="0719bf42931033c3109ecc6357e8adb567cb637b"
MY_P="u-boot-${COMMMIT}"
DESCRIPTION="Das U-boot and utilities for working with Das U-Boot for the PinePhone Pro"
HOMEPAGE="https://www.denx.de/wiki/U-Boot/WebHome"
SRC_URI="
https://source.denx.de/u-boot/u-boot/-/archive/${COMMMIT}/u-boot-${COMMMIT}.tar.gz -> u-boot-${PV}.tar.gz
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot/trusted-firmware-a-${FIRMWAREVERSION}.tar.gz
"
S="${WORKDIR}/${MY_P}"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~arm64"
IUSE="envtools"
RDEPEND="dev-libs/openssl:="
DEPEND="${RDEPEND}"
BDEPEND="
sys-apps/dtc
sys-devel/bison
sys-devel/flex
virtual/pkgconfig
"
src_prepare() {
default
sed -i 's:\bpkg-config\b:${PKG_CONFIG}:g' \
scripts/kconfig/{g,m,n,q}conf-cfg.sh \
scripts/kconfig/Makefile \
tools/Makefile || die
#Apply PinePhone Pro patches
eapply "${FILESDIR}"/0001-PPP.patch
eapply "${FILESDIR}"/0002-Add-ppp-dt.patch
eapply "${FILESDIR}"/0003-Config-changes.patch
eapply "${FILESDIR}"/0004-Add-kconfig-include.patch
eapply "${FILESDIR}"/0005-Add-pinephone-pro-rk3399.h.patch
eapply "${FILESDIR}"/0006-Added-dts-to-makefile.patch
eapply "${FILESDIR}"/0007-u-boot.dtsi-fixes.patch
eapply "${FILESDIR}"/0008-fix-boot-order.patch
eapply "${FILESDIR}"/0009-Correct-boot-order-to-be-USB-SD-eMMC.patch
}
src_configure() {
tc-export AR BUILD_CC CC PKG_CONFIG
}
src_compile() {
cd ${WORKDIR}/trusted-firmware-a-${FIRMWAREVERSION}
unset CFLAGS CXXFLAGS CPPFLAGS LDFLAGS
make PLAT=rk3399
cp build/rk3399/release/bl31/bl31.elf ${S}
cd ${S}
# Unset a few KBUILD variables. Bug #540476
unset KBUILD_OUTPUT KBUILD_SRC
local myemakeargs=(
AR="${AR}"
CC="${CC}"
HOSTCC="${BUILD_CC}"
HOSTCFLAGS="${CFLAGS} ${CPPFLAGS}"' $(HOSTCPPFLAGS)'
HOSTLDFLAGS="${LDFLAGS}"
)
emake "${myemakeargs[@]}" pinephone-pro-rk3399_defconfig
echo 'CONFIG_IDENT_STRING=" Gentoo"' >> .config
echo 'CONFIG_USB_EHCI_HCD=n' >> .config
echo 'CONFIG_USB_EHCI_GENERIC=n' >> .config
echo 'CONFIG_USB_XHCI_HCD=n' >> .config
echo 'CONFIG_USB_XHCI_DWC3=n' >> .config
echo 'CONFIG_USB_DWC3=n' >> .config
echo 'CONFIG_USB_DWC3_GENERIC=n' >> .config
emake "${myemakeargs[@]}" EXTRAVERSION=-${PKGREL}
emake "${myemakeargs[@]}" \
NO_SDL=1 \
HOSTSTRIP=: \
STRIP=: \
CONFIG_ENV_OVERWRITE=y \
$(usex envtools envtools tools-all)
}
src_test() { :; }
src_install() {
mkdir /boot/extlinux
insinto /boot/
doins ${S}/u-boot.itb
insinto /boot/
doins ${S}/idbloader.img
cd tools || die
if ! use envtools; then
dobin bmp_logo dumpimage fdtgrep gen_eth_addr img2srec mkenvimage mkimage
fi
dobin env/fw_printenv
dosym fw_printenv /usr/bin/fw_setenv
insinto /etc
doins env/fw_env.config
doman ../doc/mkimage.1
}
pkg_postinst() {
einfo "This U-Boot is only to be used for the PinePhone Pro."
einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/Image to the boot partition (replacing the existing Image)."
einfo "New version of U-Boot firmware can be flashed to your microSD card or eMMC module."
einfo "You can do that by running:"
einfo "# dd if=/boot/idbloader.img of=/dev/mmcblkX seek=64 conv=notrunc,fsync"
einfo "# dd if=/boot/u-boot.itb of=/dev/mmcblkX seek=16384 conv=notrunc,fsync"
}