gjdwebserver/gjdwebserver-overlay
gjdwebserver/gjdwebserver-overlay
3
0
Fork 0
Code Pull Requests Releases Activity
89c7fc24b6
gjdwebserver-overlay/dev-embedded/u-boot-pinephone-pro/files/1003-mmc-sunxi-Add-support-for-DMA-transfers.patch
Gerben Jan Dijkman bd5cc23c5c Update
2022-07-09 19:38:06 +02:00

355 lines
10 KiB
Diff
Raw Blame History

From b0950e4696b391578f7428337e41fa8ca14b225d Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Wed, 11 Sep 2019 20:45:28 +0200
Subject: [PATCH 27/29] mmc: sunxi: Add support for DMA transfers
Allwinner MMC controller supports DMA via internal DMA controller,
use it.
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
arch/arm/include/asm/arch-sunxi/mmc.h | 7 +
drivers/mmc/sunxi_mmc.c | 204 +++++++++++++++++++++++---
2 files changed, 192 insertions(+), 19 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index 5daacf10eb..dc8ea6f43a 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -112,6 +112,10 @@ struct sunxi_mmc {
SUNXI_MMC_RINT_COMMAND_DONE | \
SUNXI_MMC_RINT_VOLTAGE_CHANGE_DONE)
+#define SUNXI_MMC_FTRGLEVEL_BURST_SIZE(v) (((v) & 0x7) << 28)
+#define SUNXI_MMC_FTRGLEVEL_RX_TL(v) (((v) & 0xfff) << 16)
+#define SUNXI_MMC_FTRGLEVEL_TX_TL(v) (((v) & 0xffff) << 0)
+
#define SUNXI_MMC_STATUS_RXWL_FLAG (0x1 << 0)
#define SUNXI_MMC_STATUS_TXWL_FLAG (0x1 << 1)
#define SUNXI_MMC_STATUS_FIFO_EMPTY (0x1 << 2)
@@ -130,6 +134,9 @@ struct sunxi_mmc {
#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0)
#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1)
+#define SUNXI_MMC_IDST_TXIRQ (0x1 << 0)
+#define SUNXI_MMC_IDST_RXIRQ (0x1 << 1)
+
#define SUNXI_MMC_COMMON_CLK_GATE (1 << 16)
#define SUNXI_MMC_COMMON_RESET (1 << 18)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 28af8e6ac5..47c947cdb8 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <dm.h>
+#include <cpu_func.h>
#include <errno.h>
#include <log.h>
#include <malloc.h>
@@ -27,6 +28,27 @@
#define CCM_MMC_CTRL_MODE_SEL_NEW 0
#endif
+#define DMA_CONFIG_DIC BIT(1) // flag: disable interrupt after this descriptor's buffer is processed
+#define DMA_CONFIG_LAST BIT(2) // flag: last descriptor
+#define DMA_CONFIG_FIRST BIT(3) // flag: first descriptor
+#define DMA_CONFIG_CHAIN BIT(4) // flag: buf_addr_ptr2 points to next descriptor
+#define DMA_CONFIG_ERROR BIT(30) // flag: out: error happened
+#define DMA_CONFIG_HOLD BIT(31) // flag: desc owned by IDMAC (set to 1)
+
+#if defined(CONFIG_MACH_SUN50I)
+// mmc2 on A64 only allows for 8k
+#define DMA_BUF_MAX_SIZE (1 << 13)
+#else
+#define DMA_BUF_MAX_SIZE (1 << 16)
+#endif
+
+struct sunxi_idma_desc {
+ u32 config;
+ u32 buf_size;
+ u32 buf_addr_ptr1;
+ u32 buf_addr_ptr2;
+};
+
struct sunxi_mmc_plat {
struct mmc_config cfg;
struct mmc mmc;
@@ -39,6 +61,8 @@ struct sunxi_mmc_priv {
struct gpio_desc cd_gpio; /* Change Detect GPIO */
struct sunxi_mmc *reg;
struct mmc_config cfg;
+ unsigned n_dma_descs;
+ struct sunxi_idma_desc* dma_descs;
};
#if !CONFIG_IS_ENABLED(DM_MMC)
@@ -318,7 +342,7 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
if (timeout_msecs < 2000)
timeout_msecs = 2000;
- /* Always read / write data through the CPU */
+ /* Read / write data through the CPU */
setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
start = get_timer(0);
@@ -328,7 +352,7 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
while ((status = readl(&priv->reg->status)) & status_bit) {
if (get_timer(start) > timeout_msecs)
- return -1;
+ return -ETIMEDOUT;
}
/*
@@ -360,21 +384,142 @@ static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
return 0;
}
+static void flush_cache_auto_align(void* buf, size_t len)
+{
+ uintptr_t mask = ~((uintptr_t)CONFIG_SYS_CACHELINE_SIZE - 1);
+ uintptr_t start = (uintptr_t)buf & mask;
+
+ len = (len + 2 * CONFIG_SYS_CACHELINE_SIZE) & mask;
+
+ flush_cache(start, len);
+}
+
+static int mmc_trans_data_by_dma(struct sunxi_mmc_priv *priv, struct mmc *mmc,
+ struct mmc_data *data)
+{
+ const int reading = !!(data->flags & MMC_DATA_READ);
+ uint8_t *buff = (uint8_t*)(reading ? data->dest : data->src);
+ unsigned byte_cnt = data->blocksize * data->blocks;
+ unsigned i, n_desc, last_block_size;
+ u32 rval;
+
+ /* data pointer and transfer size needs to be aligned to 4 bytes */
+
+ /* Read / write data through IDMAC */
+ clrbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
+
+ n_desc = byte_cnt / DMA_BUF_MAX_SIZE;
+ last_block_size = byte_cnt % DMA_BUF_MAX_SIZE;
+ if (last_block_size)
+ n_desc++;
+
+ if (n_desc > priv->n_dma_descs)
+ return -ENOMEM;
+
+ memset(priv->dma_descs, 0, sizeof(struct sunxi_idma_desc) * n_desc);
+
+ for (i = 0; i < n_desc; i++) {
+ struct sunxi_idma_desc* desc = &priv->dma_descs[i];
+ bool is_last = i == n_desc - 1;
+ bool is_first = i == 0;
+
+ desc->config = DMA_CONFIG_CHAIN | DMA_CONFIG_HOLD
+ | (is_last ? DMA_CONFIG_LAST : DMA_CONFIG_DIC)
+ | (is_first ? DMA_CONFIG_FIRST : 0);
+
+ if (is_last && last_block_size)
+ desc->buf_size = last_block_size;
+ else
+ desc->buf_size = DMA_BUF_MAX_SIZE;
+
+ desc->buf_addr_ptr1 = (uintptr_t)buff + i * DMA_BUF_MAX_SIZE;
+ if (!is_last)
+ desc->buf_addr_ptr2 = (uintptr_t)(desc + 1);
+ }
+
+ /*
+ * Make sure everyhting needed for a transfer is in DRAM.
+ */
+
+ flush_cache_auto_align(buff, byte_cnt);
+ flush_cache_auto_align(priv->dma_descs,
+ sizeof(struct sunxi_idma_desc) * n_desc);
+
+ dsb();
+ isb();
+
+ /* dma enable */
+ setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_DMA_RESET
+ | SUNXI_MMC_GCTRL_DMA_ENABLE);
+
+ /* idma reset */
+ writel(SUNXI_MMC_IDMAC_RESET, &priv->reg->dmac);
+
+ /* wait idma reset done */
+ while (readl(&priv->reg->dmac) & SUNXI_MMC_IDMAC_RESET);
+
+ /* idma on */
+ writel(SUNXI_MMC_IDMAC_ENABLE | SUNXI_MMC_IDMAC_FIXBURST,
+ &priv->reg->dmac);
+
+ /* enable interrupt flags */
+ rval = readl(&priv->reg->idie)
+ & ~(SUNXI_MMC_IDIE_RXIRQ | SUNXI_MMC_IDIE_TXIRQ);
+ rval |= reading ? SUNXI_MMC_IDIE_RXIRQ : SUNXI_MMC_IDIE_TXIRQ;
+ writel(rval, &priv->reg->idie);
+
+ /* set address of the first descriptor */
+ writel((uintptr_t)priv->dma_descs, &priv->reg->dlba);
+
+ /* set fifo fill tresholds for issuing dma */
+
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
+ if (priv->mmc_no == 2) {
+ // for mmc 2 we need to set this differently
+ writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(3) // burst-16
+ | SUNXI_MMC_FTRGLEVEL_RX_TL(15)
+ | SUNXI_MMC_FTRGLEVEL_TX_TL(240),
+ &priv->reg->ftrglevel);
+ } else {
+ writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(2) // burst-8
+ | SUNXI_MMC_FTRGLEVEL_RX_TL(7)
+ | SUNXI_MMC_FTRGLEVEL_TX_TL(248),
+ &priv->reg->ftrglevel);
+ }
+#else
+ writel(SUNXI_MMC_FTRGLEVEL_BURST_SIZE(2) // burst-8
+ | SUNXI_MMC_FTRGLEVEL_RX_TL(7)
+ | SUNXI_MMC_FTRGLEVEL_TX_TL(8),
+ &priv->reg->ftrglevel);
+#endif
+
+ writel(0xffffffff, &priv->reg->idst);
+
+ return 0;
+}
+
static int mmc_rint_wait(struct sunxi_mmc_priv *priv, struct mmc *mmc,
- uint timeout_msecs, uint done_bit, const char *what)
+ uint timeout_msecs, uint done_bit, bool wait_dma,
+ const char *what)
{
unsigned int status;
unsigned long start = get_timer(0);
+ bool dma_done = true;
do {
status = readl(&priv->reg->rint);
+
if ((get_timer(start) > timeout_msecs) ||
(status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
debug("%s timeout %x\n", what,
status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
return -ETIMEDOUT;
}
- } while (!(status & done_bit));
+
+ if (wait_dma)
+ dma_done = readl(&priv->reg->idst)
+ & (SUNXI_MMC_IDST_TXIRQ | SUNXI_MMC_IDST_RXIRQ);
+ } while (!(status & done_bit) || !dma_done);
return 0;
}
@@ -388,6 +533,7 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
int error = 0;
unsigned int status = 0;
unsigned int bytecnt = 0;
+ bool usedma = false;
if (priv->fatal_err)
return -1;
@@ -424,42 +570,45 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
writel(cmd->cmdarg, &priv->reg->arg);
- if (!data)
- writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
-
/*
* transfer data and check status
* STATREG[2] : FIFO empty
* STATREG[3] : FIFO full
*/
if (data) {
- int ret = 0;
-
bytecnt = data->blocksize * data->blocks;
debug("trans data %d bytes\n", bytecnt);
- writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
- ret = mmc_trans_data_by_cpu(priv, mmc, data);
- if (ret) {
- error = readl(&priv->reg->rint) &
- SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
- error = -ETIMEDOUT;
- goto out;
+
+ if (bytecnt > 64 && !IS_ENABLED(SPL_BUILD)) {
+ debug(" using dma %d\n", bytecnt);
+ error = mmc_trans_data_by_dma(priv, mmc, data);
+ writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
+ usedma = true;
+ } else {
+ debug(" using pio\n");
+ writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
+ error = mmc_trans_data_by_cpu(priv, mmc, data);
}
+
+ if (error)
+ goto out;
+ } else {
+ writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
}
error = mmc_rint_wait(priv, mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE,
- "cmd");
+ false, "cmd");
if (error)
goto out;
if (data) {
- timeout_msecs = 120;
+ timeout_msecs = 10000;
debug("cacl timeout %x msec\n", timeout_msecs);
error = mmc_rint_wait(priv, mmc, timeout_msecs,
data->blocks > 1 ?
SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
SUNXI_MMC_RINT_DATA_OVER,
- "data");
+ usedma, "data");
if (error)
goto out;
}
@@ -491,6 +640,14 @@ static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
debug("mmc resp 0x%08x\n", cmd->response[0]);
}
out:
+ if (data && usedma) {
+ //status = readl(&reg->idst);
+ writel(0, &priv->reg->idie);
+ writel(0xffffffff, &priv->reg->idst);
+ writel(0, &priv->reg->dmac);
+ clrbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_DMA_ENABLE);
+ }
+
if (error < 0) {
writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
mmc_update_clk(priv);
@@ -674,6 +831,15 @@ static int sunxi_mmc_probe(struct udevice *dev)
priv->reg = dev_read_addr_ptr(dev);
+ // make sure we have enough space for descritors for BLK_SIZE * b_max
+ priv->n_dma_descs = 512 * 65536 / DMA_BUF_MAX_SIZE;
+ priv->dma_descs = malloc(sizeof(struct sunxi_idma_desc)
+ * priv->n_dma_descs);
+ if (priv->dma_descs == NULL) {
+ debug("init mmc alloc failed\n");
+ return -ENOMEM;
+ }
+
/* We don't have a sunxi clock driver so find the clock address here */
ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
1, &args);
--
2.31.1
View Git Blame Copy Permalink