gjdwebserver-overlay/dev-embedded/u-boot-pinephone-pro/u-boot-pinephone-pro-2022.04.ebuild
Gerben Jan Dijkman f0d3747b9e Version Bump
2022-04-11 22:15:58 +02:00

130 lines
3.6 KiB
Bash

# Copyright 1999-2022 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2
EAPI=8
inherit toolchain-funcs
PKGREL="4"
FIRMWAREVERSION="2.6"
COMMMIT="e4b6ebd3de982ae7185dbf689a030e73fd06e0d2"
MY_P="u-boot-${COMMMIT}"
DESCRIPTION="Das U-boot and utilities for working with Das U-Boot for the PinePhone Pro"
HOMEPAGE="https://www.denx.de/wiki/U-Boot/WebHome"
SRC_URI="
https://source.denx.de/u-boot/u-boot/-/archive/${COMMMIT}/u-boot-${COMMMIT}.tar.gz -> u-boot-${PV}.tar.gz
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot/trusted-firmware-a-${FIRMWAREVERSION}.tar.gz
"
S="${WORKDIR}/${MY_P}"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~arm64"
IUSE="envtools"
RDEPEND="dev-libs/openssl:="
DEPEND="${RDEPEND}"
BDEPEND="
sys-apps/dtc
sys-devel/bison
sys-devel/flex
virtual/pkgconfig
"
src_prepare() {
default
sed -i 's:\bpkg-config\b:${PKG_CONFIG}:g' \
scripts/kconfig/{g,m,n,q}conf-cfg.sh \
scripts/kconfig/Makefile \
tools/Makefile || die
#Apply PinePhone Pro patches
eapply "${FILESDIR}"/0001-PPP.patch
eapply "${FILESDIR}"/1001-Correct-boot-order-to-be-USB-SD-eMMC.patch
eapply "${FILESDIR}"/1002-rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
eapply "${FILESDIR}"/1004-mtd-spi-nor-ids-Add-GigaDevice-GD25LQ128E-entry.patch
eapply "${FILESDIR}"/1005-Reconfigure-GPIO4_D3-as-input-on-PinePhone-Pro.patch
eapply "${FILESDIR}"/2001-mmc-sdhci-allow-disabling-sdma-in-spl.patch
eapply "${FILESDIR}"/3001-pinephone-pro-Remove-cargo-culted-iodomain-config.patch
eapply "${FILESDIR}"/3002-pine64-pinephonePro-SPI-support.patch
}
src_configure() {
tc-export AR BUILD_CC CC PKG_CONFIG
}
src_compile() {
cd ${WORKDIR}/trusted-firmware-a-${FIRMWAREVERSION}
unset CFLAGS CXXFLAGS CPPFLAGS LDFLAGS
make PLAT=rk3399
cp build/rk3399/release/bl31/bl31.elf ${S}
cd ${S}
# Unset a few KBUILD variables. Bug #540476
unset KBUILD_OUTPUT KBUILD_SRC
local myemakeargs=(
AR="${AR}"
CC="${CC}"
HOSTCC="${BUILD_CC}"
HOSTCFLAGS="${CFLAGS} ${CPPFLAGS}"' $(HOSTCPPFLAGS)'
HOSTLDFLAGS="${LDFLAGS}"
)
emake "${myemakeargs[@]}" pinephone-pro-rk3399_defconfig
echo 'CONFIG_IDENT_STRING=" Gentoo Linux"' >> .config
echo 'CONFIG_BOOTDELAY=" 0"' >> .config
echo 'CONFIG_SPL_DM_SEQ_ALIAS=" y"' >> .config
echo 'CONFIG_SF_DEFAULT_BUS=" 1"' >> .config
echo 'CONFIG_SPL_MMC_SDHCI_SDMA=" n"' >> .config
emake "${myemakeargs[@]}" EXTRAVERSION=-${PKGREL}
emake "${myemakeargs[@]}" \
NO_SDL=1 \
HOSTSTRIP=: \
STRIP=: \
CONFIG_ENV_OVERWRITE=y \
$(usex envtools envtools tools-all)
}
src_test() { :; }
src_install() {
insinto /boot/
doins ${S}/u-boot.itb
insinto /boot/
doins ${S}/idbloader.img
cd tools || die
if ! use envtools; then
dobin bmp_logo dumpimage fdtgrep gen_eth_addr img2srec mkenvimage mkimage
fi
dobin env/fw_printenv
dosym fw_printenv /usr/bin/fw_setenv
insinto /etc
doins env/fw_env.config
doman ../doc/mkimage.1
}
pkg_postinst() {
einfo "This U-Boot is only to be used for the PinePhone Pro."
einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/Image to the boot partition (replacing the existing Image)."
einfo "New version of U-Boot firmware can be flashed to your microSD card or eMMc module."
einfo "You can do that by running:"
einfo "# dd if=/boot/idbloader.img of=/dev/mmcblkX seek=64 conv=notrunc,fsync"
einfo "# dd if=/boot/u-boot.itb of=/dev/mmcblkX seek=16384 conv=notrunc,fsync"
einfo "Due to the Boot Priority for the PPP it is HIGHLY recommended to not put U-Boot on the eMMc because there is no easy way to recover is something went wrong."
}