gjdwebserver/gjdwebserver-overlay
gjdwebserver/gjdwebserver-overlay
3
0
Fork 0
Code Pull Requests Releases Activity
fab5a9740f
gjdwebserver-overlay/sys-kernel/pinephone-pro-sources/files/0011-power-rk818-battery-Add-battery-driver-for-RK818.patch
Gerben Jan Dijkman 4b1427b69b Changed ebuild
2022-01-15 02:12:55 +01:00

3965 lines
112 KiB
Diff
Raw Blame History

From: =?utf-8?q?Kamil_Trzci=C5=84ski?= <ayufan@ayufan.eu>
Date: Sun, 3 Jan 2021 11:43:38 +0100
Subject: [PATCH 12/36] power: rk818-battery: Add battery driver for RK818
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
This is forward ported driver from Rockchip BSP.
Signed-of-by: Kamil Trzciński <ayufan@ayufan.eu>
---
drivers/mfd/rk808.c | 40 +-
drivers/power/supply/Kconfig | 8 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/rk818_battery.c | 3568 ++++++++++++++++++++++++++++++++++
drivers/power/supply/rk818_battery.h | 168 ++
include/linux/mfd/rk808.h | 81 +-
6 files changed, 3863 insertions(+), 3 deletions(-)
create mode 100644 drivers/power/supply/rk818_battery.c
create mode 100644 drivers/power/supply/rk818_battery.h
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 1a6857e..7d1f000 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -76,12 +76,47 @@ static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
return true;
}
+static bool rk818_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /*
+ * Notes:
+ * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+ * we don't use that feature. It's better to cache.
+ * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+ * bits are cleared in case when we shutoff anyway, but better safe.
+ */
+
+ switch (reg) {
+ case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+ case RK808_RTC_STATUS_REG:
+ case RK808_VB_MON_REG:
+ case RK808_THERMAL_REG:
+ case RK808_DCDC_EN_REG:
+ case RK808_LDO_EN_REG:
+ case RK808_DCDC_UV_STS_REG:
+ case RK808_LDO_UV_STS_REG:
+ case RK808_DCDC_PG_REG:
+ case RK808_LDO_PG_REG:
+ case RK808_DEVCTRL_REG:
+ case RK808_INT_STS_REG1:
+ case RK808_INT_STS_REG2:
+ case RK808_INT_STS_MSK_REG1:
+ case RK808_INT_STS_MSK_REG2:
+ case RK818_LDO8_ON_VSEL_REG: // TODO(ayufan):??
+ case RK818_LDO8_SLP_VSEL_REG: // TODO(ayufan):??
+ case RK818_SUP_STS_REG ... RK818_SAVE_DATA19:
+ return true;
+ }
+
+ return false;
+}
+
static const struct regmap_config rk818_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = RK818_USB_CTRL_REG,
+ .max_register = RK818_SAVE_DATA19,
.cache_type = REGCACHE_RBTREE,
- .volatile_reg = rk808_is_volatile_reg,
+ .volatile_reg = rk818_is_volatile_reg,
};
static const struct regmap_config rk805_regmap_config = {
@@ -170,6 +205,7 @@ static const struct mfd_cell rk817s[] = {
static const struct mfd_cell rk818s[] = {
{ .name = "rk808-clkout", },
{ .name = "rk808-regulator", },
+ { .name = "rk818-battery", .of_compatible = "rk818-battery", },
{
.name = "rk808-rtc",
.num_resources = ARRAY_SIZE(rtc_resources),
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 5cf5bb5..f5d4434 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -854,4 +854,12 @@ config CHARGER_SURFACE
Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3,
Surface Book 3, and Surface Laptop Go.
+config BATTERY_RK818
+ bool "RK818 Battery driver"
+ depends on MFD_RK808
+ default n
+ help
+ If you say yes here you will get support for the battery of RK818 PMIC.
+ This driver can give support for Rk818 Battery Charge Interface.
+
endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 4e55a11aab..1c725ee 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -104,3 +104,4 @@ obj-$(CONFIG_RN5T618_POWER) += rn5t618_power.o
obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o
obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o
obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o
+obj-$(CONFIG_BATTERY_RK818) += rk818_battery.o
diff --git a/drivers/power/supply/rk818_battery.c b/drivers/power/supply/rk818_battery.c
new file mode 100644
index 00000000..f09f456
--- /dev/null
+++ b/drivers/power/supply/rk818_battery.c
@@ -0,0 +1,3568 @@
+/*
+ * rk818 battery driver
+ *
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * chenjh <chenjh@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+//#include <linux/power/rk_usbbc.h>
+#include <linux/regmap.h>
+//#include <linux/rk_keys.h>
+#include <linux/rtc.h>
+#include <linux/time64.h>
+#include <linux/timer.h>
+//#include <linux/wakelock.h>
+#include <linux/workqueue.h>
+#include "rk818_battery.h"
+
+static int dbg_enable = 0;
+module_param_named(dbg_level, dbg_enable, int, 0644);
+
+#define DBG(args...) \
+ do { \
+ if (dbg_enable) { \
+ pr_info(args); \
+ } \
+ } while (0)
+
+#define BAT_INFO(fmt, args...) pr_info("rk818-bat: "fmt, ##args)
+
+/* default param */
+#define DEFAULT_BAT_RES 135
+#define DEFAULT_SLP_ENTER_CUR 300
+#define DEFAULT_SLP_EXIT_CUR 300
+#define DEFAULT_SLP_FILTER_CUR 100
+#define DEFAULT_PWROFF_VOL_THRESD 3400
+#define DEFAULT_MONITOR_SEC 5
+#define DEFAULT_ALGR_VOL_THRESD1 3850
+#define DEFAULT_ALGR_VOL_THRESD2 3950
+#define DEFAULT_MAX_SOC_OFFSET 60
+#define DEFAULT_FB_TEMP TEMP_105C
+#define DEFAULT_ZERO_RESERVE_DSOC 10
+#define DEFAULT_POFFSET 42
+#define DEFAULT_COFFSET 0x832
+#define DEFAULT_SAMPLE_RES 20
+#define DEFAULT_ENERGY_MODE 0
+#define INVALID_COFFSET_MIN 0x780
+#define INVALID_COFFSET_MAX 0x980
+#define INVALID_VOL_THRESD 2500
+
+/* sample resistor and division */
+#define SAMPLE_RES_10MR 10
+#define SAMPLE_RES_20MR 20
+#define SAMPLE_RES_DIV1 1
+#define SAMPLE_RES_DIV2 2
+
+/* virtual params */
+#define VIRTUAL_CURRENT 1000
+#define VIRTUAL_VOLTAGE 3888
+#define VIRTUAL_SOC 66
+#define VIRTUAL_PRESET 1
+#define VIRTUAL_TEMPERATURE 188
+#define VIRTUAL_STATUS POWER_SUPPLY_STATUS_CHARGING
+
+/* charge */
+#define FINISH_CHRG_CUR1 1000
+#define FINISH_CHRG_CUR2 1500
+#define FINISH_MAX_SOC_DELAY 20
+#define TERM_CHRG_DSOC 88
+#define TERM_CHRG_CURR 600
+#define TERM_CHRG_K 650
+#define SIMULATE_CHRG_INTV 8
+#define SIMULATE_CHRG_CURR 400
+#define SIMULATE_CHRG_K 1500
+#define FULL_CHRG_K 400
+
+/* zero algorithm */
+#define PWROFF_THRESD 3400
+#define MIN_ZERO_DSOC_ACCURACY 10 /*0.01%*/
+#define MIN_ZERO_OVERCNT 100
+#define MIN_ACCURACY 1
+#define DEF_PWRPATH_RES 50
+#define WAIT_DSOC_DROP_SEC 15
+#define WAIT_SHTD_DROP_SEC 30
+#define ZERO_GAP_XSOC1 10
+#define ZERO_GAP_XSOC2 5
+#define ZERO_GAP_XSOC3 3
+#define ZERO_LOAD_LVL1 1400
+#define ZERO_LOAD_LVL2 600
+#define ZERO_GAP_CALIB 5
+
+#define ADC_CALIB_THRESHOLD 4
+#define ADC_CALIB_LMT_MIN 3
+#define ADC_CALIB_CNT 5
+#define NTC_CALC_FACTOR 7
+
+/* time */
+#define POWER_ON_SEC_BASE 1
+#define MINUTE(x) ((x) * 60)
+
+/* sleep */
+#define SLP_CURR_MAX 40
+#define SLP_CURR_MIN 6
+#define DISCHRG_TIME_STEP1 MINUTE(10)
+#define DISCHRG_TIME_STEP2 MINUTE(60)
+#define SLP_DSOC_VOL_THRESD 3600
+#define REBOOT_PERIOD_SEC 180
+#define REBOOT_MAX_CNT 80
+
+/* fcc */
+#define MIN_FCC 500
+
+/* TS detect battery temperature */
+#define ADC_CUR_MSK 0x03
+#define ADC_CUR_20UA 0x00
+#define ADC_CUR_40UA 0x01
+#define ADC_CUR_60UA 0x02
+#define ADC_CUR_80UA 0x03
+
+#define NTC_CALC_FACTOR_80UA 7
+#define NTC_CALC_FACTOR_60UA 9
+#define NTC_CALC_FACTOR_40UA 13
+#define NTC_CALC_FACTOR_20UA 27
+#define NTC_80UA_MAX_MEASURE 27500
+#define NTC_60UA_MAX_MEASURE 36666
+#define NTC_40UA_MAX_MEASURE 55000
+#define NTC_20UA_MAX_MEASURE 110000
+
+static const char *bat_status[] = {
+ "charge off", "dead charge", "trickle charge", "cc cv",
+ "finish", "usb over vol", "bat temp error", "timer error",
+};
+
+struct rk818_battery {
+ struct platform_device *pdev;
+ struct rk808 *rk818;
+ struct regmap *regmap;
+ struct device *dev;
+ struct power_supply *bat;
+ struct power_supply *usb_psy;
+ struct power_supply *ac_psy;
+ struct battery_platform_data *pdata;
+ struct workqueue_struct *bat_monitor_wq;
+ struct delayed_work bat_delay_work;
+ struct delayed_work calib_delay_work;
+ // struct wake_lock wake_lock;
+ struct notifier_block fb_nb;
+ struct timer_list caltimer;
+ time64_t rtc_base;
+ int bat_res;
+ int chrg_status;
+ bool is_initialized;
+ bool is_first_power_on;
+ u8 res_div;
+ int current_max;
+ int voltage_max;
+ int current_avg;
+ int voltage_avg;
+ int voltage_ocv;
+ int voltage_relax;
+ int voltage_k;
+ int voltage_b;
+ int remain_cap;
+ int design_cap;
+ int nac;
+ int fcc;
+ int qmax;
+ int dsoc;
+ int rsoc;
+ int poffset;
+ int age_ocv_soc;
+ bool age_allow_update;
+ int age_level;
+ int age_ocv_cap;
+ int age_voltage;
+ int age_adjust_cap;
+ unsigned long age_keep_sec;
+ int zero_timeout_cnt;
+ int zero_remain_cap;
+ int zero_dsoc;
+ int zero_linek;
+ u64 zero_drop_sec;
+ u64 shtd_drop_sec;
+ int sm_remain_cap;
+ int sm_linek;
+ int sm_chrg_dsoc;
+ int sm_dischrg_dsoc;
+ int algo_rest_val;
+ int algo_rest_mode;
+ int sleep_sum_cap;
+ int sleep_remain_cap;
+ unsigned long sleep_dischrg_sec;
+ unsigned long sleep_sum_sec;
+ bool sleep_chrg_online;
+ u8 sleep_chrg_status;
+ bool adc_allow_update;
+ int fb_blank;
+ bool s2r; /*suspend to resume*/
+ u32 work_mode;
+ int temperature;
+ u32 monitor_ms;
+ u32 pwroff_min;
+ u32 adc_calib_cnt;
+ unsigned long finish_base;
+ unsigned long boot_base;
+ unsigned long flat_match_sec;
+ unsigned long plug_in_base;
+ unsigned long plug_out_base;
+ u8 halt_cnt;
+ bool is_halt;
+ bool is_max_soc_offset;
+ bool is_sw_reset;
+ bool is_ocv_calib;
+ bool is_first_on;
+ bool is_force_calib;
+ int last_dsoc;
+ int ocv_pre_dsoc;
+ int ocv_new_dsoc;
+ int max_pre_dsoc;
+ int max_new_dsoc;
+ int force_pre_dsoc;
+ int force_new_dsoc;
+ int dbg_cap_low0;
+ int dbg_pwr_dsoc;
+ int dbg_pwr_rsoc;
+ int dbg_pwr_vol;
+ int dbg_chrg_min[10];
+ int dbg_meet_soc;
+ int dbg_calc_dsoc;
+ int dbg_calc_rsoc;
+ u8 ac_in;
+ u8 usb_in;
+ int is_charging;
+ unsigned long charge_count;
+};
+
+#define DIV(x) ((x) ? (x) : 1)
+
+static void rk_send_wakeup_key(void)
+{
+ // TODO: WHAT TO DO HERE?
+}
+
+static u64 get_boot_sec(void)
+{
+ struct timespec64 ts;
+
+ ktime_get_boottime_ts64(&ts);
+
+ return ts.tv_sec;
+}
+
+static unsigned long base2sec(unsigned long x)
+{
+ if (x)
+ return (get_boot_sec() > x) ? (get_boot_sec() - x) : 0;
+ else
+ return 0;
+}
+
+static unsigned long base2min(unsigned long x)
+{
+ return base2sec(x) / 60;
+}
+
+static u32 interpolate(int value, u32 *table, int size)
+{
+ u8 i;
+ u16 d;
+
+ for (i = 0; i < size; i++) {
+ if (value < table[i])
+ break;
+ }
+
+ if ((i > 0) && (i < size)) {
+ d = (value - table[i - 1]) * (MAX_INTERPOLATE / (size - 1));
+ d /= table[i] - table[i - 1];
+ d = d + (i - 1) * (MAX_INTERPOLATE / (size - 1));
+ } else {
+ d = i * ((MAX_INTERPOLATE + size / 2) / size);
+ }
+
+ if (d > 1000)
+ d = 1000;
+
+ return d;
+}
+
+/* (a*b)/c */
+static int32_t ab_div_c(u32 a, u32 b, u32 c)
+{
+ bool sign;
+ u32 ans = MAX_INT;
+ int tmp;
+
+ sign = ((((a ^ b) ^ c) & 0x80000000) != 0);
+ if (c != 0) {
+ if (sign)
+ c = -c;
+ tmp = (a * b + (c >> 1)) / c;
+ if (tmp < MAX_INT)
+ ans = tmp;
+ }
+
+ if (sign)
+ ans = -ans;
+
+ return ans;
+}
+
+static int rk818_bat_read(struct rk818_battery *di, u8 reg)
+{
+ int ret, val;
+
+ ret = regmap_read(di->regmap, reg, &val);
+ if (ret)
+ dev_err(di->dev, "read reg:0x%x failed\n", reg);
+
+ return val;
+}
+
+static int rk818_bat_write(struct rk818_battery *di, u8 reg, u8 buf)
+{
+ int ret;
+
+ ret = regmap_write(di->regmap, reg, buf);
+ if (ret)
+ dev_err(di->dev, "i2c write reg: 0x%2x error\n", reg);
+
+ return ret;
+}
+
+static int rk818_bat_set_bits(struct rk818_battery *di, u8 reg, u8 mask, u8 buf)
+{
+ int ret;
+
+ ret = regmap_update_bits(di->regmap, reg, mask, buf);
+ if (ret)
+ dev_err(di->dev, "write reg:0x%x failed\n", reg);
+
+ return ret;
+}
+
+static int rk818_bat_clear_bits(struct rk818_battery *di, u8 reg, u8 mask)
+{
+ int ret;
+
+ ret = regmap_update_bits(di->regmap, reg, mask, 0);
+ if (ret)
+ dev_err(di->dev, "clr reg:0x%02x failed\n", reg);
+
+ return ret;
+}
+
+static void rk818_bat_dump_regs(struct rk818_battery *di, u8 start, u8 end)
+{
+ int i;
+
+ if (!dbg_enable)
+ return;
+
+ DBG("dump regs from: 0x%x-->0x%x\n", start, end);
+ for (i = start; i < end; i++)
+ DBG("0x%x: 0x%0x\n", i, rk818_bat_read(di, i));
+}
+
+static bool rk818_bat_chrg_online(struct rk818_battery *di)
+{
+ u8 buf;
+
+ buf = rk818_bat_read(di, RK818_VB_MON_REG);
+
+ return (buf & PLUG_IN_STS) ? true : false;
+}
+
+static int rk818_bat_get_coulomb_cap(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_GASCNT3_REG) << 24;
+ val |= rk818_bat_read(di, RK818_GASCNT2_REG) << 16;
+ val |= rk818_bat_read(di, RK818_GASCNT1_REG) << 8;
+ val |= rk818_bat_read(di, RK818_GASCNT0_REG) << 0;
+
+ return (val / 2390) * di->res_div;
+}
+
+static int rk818_bat_get_rsoc(struct rk818_battery *di)
+{
+ int remain_cap;
+
+ remain_cap = rk818_bat_get_coulomb_cap(di);
+ return (remain_cap + di->fcc / 200) * 100 / DIV(di->fcc);
+}
+
+static ssize_t bat_info_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ char cmd;
+ struct rk818_battery *di = dev_get_drvdata(dev);
+
+ sscanf(buf, "%c", &cmd);
+
+ if (cmd == 'n')
+ rk818_bat_set_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_NOW, FG_RESET_NOW);
+ else if (cmd == 'm')
+ rk818_bat_set_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_LATE, FG_RESET_LATE);
+ else if (cmd == 'c')
+ rk818_bat_clear_bits(di, RK818_MISC_MARK_REG,
+ FG_RESET_LATE | FG_RESET_NOW);
+ else if (cmd == 'r')
+ BAT_INFO("0x%2x\n", rk818_bat_read(di, RK818_MISC_MARK_REG));
+ else
+ BAT_INFO("command error\n");
+
+ return count;
+}
+
+static struct device_attribute rk818_bat_attr[] = {
+ __ATTR(bat, 0664, NULL, bat_info_store),
+};
+
+static void rk818_bat_enable_gauge(struct rk818_battery *di)
+{
+ u8 buf;
+
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ buf |= GG_EN;
+ rk818_bat_write(di, RK818_TS_CTRL_REG, buf);
+}
+
+static void rk818_bat_save_age_level(struct rk818_battery *di, u8 level)
+{
+ rk818_bat_write(di, RK818_UPDAT_LEVE_REG, level);
+}
+
+static u8 rk818_bat_get_age_level(struct rk818_battery *di)
+{
+ return rk818_bat_read(di, RK818_UPDAT_LEVE_REG);
+}
+
+static int rk818_bat_get_vcalib0(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_VCALIB0_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_VCALIB0_REGH) << 8;
+
+ DBG("<%s>. voffset0: 0x%x\n", __func__, val);
+ return val;
+}
+
+static int rk818_bat_get_vcalib1(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_VCALIB1_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_VCALIB1_REGH) << 8;
+
+ DBG("<%s>. voffset1: 0x%x\n", __func__, val);
+ return val;
+}
+
+static int rk818_bat_get_ioffset(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_IOFFSET_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_IOFFSET_REGH) << 8;
+
+ DBG("<%s>. ioffset: 0x%x\n", __func__, val);
+ return val;
+}
+
+static int rk818_bat_get_coffset(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_CAL_OFFSET_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_CAL_OFFSET_REGH) << 8;
+
+ DBG("<%s>. coffset: 0x%x\n", __func__, val);
+ return val;
+}
+
+static void rk818_bat_set_coffset(struct rk818_battery *di, int val)
+{
+ u8 buf;
+
+ if ((val < INVALID_COFFSET_MIN) || (val > INVALID_COFFSET_MAX)) {
+ BAT_INFO("set invalid coffset=0x%x\n", val);
+ return;
+ }
+
+ buf = (val >> 8) & 0xff;
+ rk818_bat_write(di, RK818_CAL_OFFSET_REGH, buf);
+ buf = (val >> 0) & 0xff;
+ rk818_bat_write(di, RK818_CAL_OFFSET_REGL, buf);
+ DBG("<%s>. coffset: 0x%x\n", __func__, val);
+}
+
+static void rk818_bat_init_voltage_kb(struct rk818_battery *di)
+{
+ int vcalib0, vcalib1;
+
+ vcalib0 = rk818_bat_get_vcalib0(di);
+ vcalib1 = rk818_bat_get_vcalib1(di);
+ di->voltage_k = (4200 - 3000) * 1000 / DIV(vcalib1 - vcalib0);
+ di->voltage_b = 4200 - (di->voltage_k * vcalib1) / 1000;
+
+ DBG("voltage_k=%d(*1000),voltage_b=%d\n", di->voltage_k, di->voltage_b);
+}
+
+static int rk818_bat_get_ocv_voltage(struct rk818_battery *di)
+{
+ int vol, val = 0;
+
+ val |= rk818_bat_read(di, RK818_BAT_OCV_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_OCV_REGH) << 8;
+
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
+
+ return vol;
+}
+
+static int rk818_bat_get_avg_voltage(struct rk818_battery *di)
+{
+ int vol, val = 0;
+
+ val |= rk818_bat_read(di, RK818_BAT_VOL_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_VOL_REGH) << 8;
+
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
+
+ return vol;
+}
+
+static bool is_rk818_bat_relax_mode(struct rk818_battery *di)
+{
+ u8 status;
+
+ status = rk818_bat_read(di, RK818_GGSTS_REG);
+ if (!(status & RELAX_VOL1_UPD) || !(status & RELAX_VOL2_UPD))
+ return false;
+ else
+ return true;
+}
+
+static u16 rk818_bat_get_relax_vol1(struct rk818_battery *di)
+{
+ u16 vol, val = 0;
+
+ val |= rk818_bat_read(di, RK818_RELAX_VOL1_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_RELAX_VOL1_REGH) << 8;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
+
+ return vol;
+}
+
+static u16 rk818_bat_get_relax_vol2(struct rk818_battery *di)
+{
+ u16 vol, val = 0;
+
+ val |= rk818_bat_read(di, RK818_RELAX_VOL2_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_RELAX_VOL2_REGH) << 8;
+ vol = di->voltage_k * val / 1000 + di->voltage_b;
+
+ return vol;
+}
+
+static u16 rk818_bat_get_relax_voltage(struct rk818_battery *di)
+{
+ u16 relax_vol1, relax_vol2;
+
+ if (!is_rk818_bat_relax_mode(di))
+ return 0;
+
+ relax_vol1 = rk818_bat_get_relax_vol1(di);
+ relax_vol2 = rk818_bat_get_relax_vol2(di);
+
+ return relax_vol1 > relax_vol2 ? relax_vol1 : relax_vol2;
+}
+
+static int rk818_bat_get_avg_current(struct rk818_battery *di)
+{
+ int cur, val = 0;
+
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGH) << 8;
+
+ if (val & 0x800)
+ val -= 4096;
+ cur = val * di->res_div * 1506 / 1000;
+
+ return cur;
+}
+
+static int rk818_bat_vol_to_ocvsoc(struct rk818_battery *di, int voltage)
+{
+ u32 *ocv_table, temp;
+ int ocv_size, ocv_soc;
+
+ ocv_table = di->pdata->ocv_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ ocv_soc = ab_div_c(temp, MAX_PERCENTAGE, MAX_INTERPOLATE);
+
+ return ocv_soc;
+}
+
+static int rk818_bat_vol_to_ocvcap(struct rk818_battery *di, int voltage)
+{
+ u32 *ocv_table, temp;
+ int ocv_size, cap;
+
+ ocv_table = di->pdata->ocv_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ cap = ab_div_c(temp, di->fcc, MAX_INTERPOLATE);
+
+ return cap;
+}
+
+static int rk818_bat_vol_to_zerosoc(struct rk818_battery *di, int voltage)
+{
+ u32 *ocv_table, temp;
+ int ocv_size, ocv_soc;
+
+ ocv_table = di->pdata->zero_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ ocv_soc = ab_div_c(temp, MAX_PERCENTAGE, MAX_INTERPOLATE);
+
+ return ocv_soc;
+}
+
+static int rk818_bat_vol_to_zerocap(struct rk818_battery *di, int voltage)
+{
+ u32 *ocv_table, temp;
+ int ocv_size, cap;
+
+ ocv_table = di->pdata->zero_table;
+ ocv_size = di->pdata->ocv_size;
+ temp = interpolate(voltage, ocv_table, ocv_size);
+ cap = ab_div_c(temp, di->fcc, MAX_INTERPOLATE);
+
+ return cap;
+}
+
+static int rk818_bat_get_iadc(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGL) << 0;
+ val |= rk818_bat_read(di, RK818_BAT_CUR_AVG_REGH) << 8;
+ if (val > 2047)
+ val -= 4096;
+
+ return val;
+}
+
+static bool rk818_bat_adc_calib(struct rk818_battery *di)
+{
+ int i, ioffset, coffset, adc, save_coffset;
+
+ if ((di->chrg_status != CHARGE_FINISH) ||
+ (di->adc_calib_cnt > ADC_CALIB_CNT) ||
+ (base2min(di->boot_base) < ADC_CALIB_LMT_MIN) ||
+ (abs(di->current_avg) < ADC_CALIB_THRESHOLD))
+ return false;
+
+ di->adc_calib_cnt++;
+ save_coffset = rk818_bat_get_coffset(di);
+ for (i = 0; i < 5; i++) {
+ adc = rk818_bat_get_iadc(di);
+ if (!rk818_bat_chrg_online(di)) {
+ rk818_bat_set_coffset(di, save_coffset);
+ BAT_INFO("quit, charger plugout when calib adc\n");
+ return false;
+ }
+ coffset = rk818_bat_get_coffset(di);
+ rk818_bat_set_coffset(di, coffset + adc);
+ msleep(2000);
+ adc = rk818_bat_get_iadc(di);
+ if (abs(adc) < ADC_CALIB_THRESHOLD) {
+ coffset = rk818_bat_get_coffset(di);
+ ioffset = rk818_bat_get_ioffset(di);
+ di->poffset = coffset - ioffset;
+ rk818_bat_write(di, RK818_POFFSET_REG, di->poffset);
+ BAT_INFO("new offset:c=0x%x, i=0x%x, p=0x%x\n",
+ coffset, ioffset, di->poffset);
+ return true;
+ } else {
+ BAT_INFO("coffset calib again %d.., max_cnt=%d\n",
+ i, di->adc_calib_cnt);
+ rk818_bat_set_coffset(di, coffset);
+ msleep(2000);
+ }
+ }
+
+ rk818_bat_set_coffset(di, save_coffset);
+
+ return false;
+}
+
+static void rk818_bat_set_ioffset_sample(struct rk818_battery *di)
+{
+ u8 ggcon;
+
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggcon &= ~ADC_CAL_MIN_MSK;
+ ggcon |= ADC_CAL_8MIN;
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
+}
+
+static void rk818_bat_set_ocv_sample(struct rk818_battery *di)
+{
+ u8 ggcon;
+
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggcon &= ~OCV_SAMP_MIN_MSK;
+ ggcon |= OCV_SAMP_8MIN;
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
+}
+
+static void rk818_bat_restart_relax(struct rk818_battery *di)
+{
+ u8 ggsts;
+
+ ggsts = rk818_bat_read(di, RK818_GGSTS_REG);
+ ggsts &= ~RELAX_VOL12_UPD_MSK;
+ rk818_bat_write(di, RK818_GGSTS_REG, ggsts);
+}
+
+static void rk818_bat_set_relax_sample(struct rk818_battery *di)
+{
+ u8 buf;
+ int enter_thres, exit_thres;
+ struct battery_platform_data *pdata = di->pdata;
+
+ enter_thres = pdata->sleep_enter_current * 1000 / 1506 / DIV(di->res_div);
+ exit_thres = pdata->sleep_exit_current * 1000 / 1506 / DIV(di->res_div);
+
+ /* set relax enter and exit threshold */
+ buf = enter_thres & 0xff;
+ rk818_bat_write(di, RK818_RELAX_ENTRY_THRES_REGL, buf);
+ buf = (enter_thres >> 8) & 0xff;
+ rk818_bat_write(di, RK818_RELAX_ENTRY_THRES_REGH, buf);
+
+ buf = exit_thres & 0xff;
+ rk818_bat_write(di, RK818_RELAX_EXIT_THRES_REGL, buf);
+ buf = (exit_thres >> 8) & 0xff;
+ rk818_bat_write(di, RK818_RELAX_EXIT_THRES_REGH, buf);
+
+ /* reset relax update state */
+ rk818_bat_restart_relax(di);
+ DBG("<%s>. sleep_enter_current = %d, sleep_exit_current = %d\n",
+ __func__, pdata->sleep_enter_current, pdata->sleep_exit_current);
+}
+
+static bool is_rk818_bat_exist(struct rk818_battery *di)
+{
+ return (rk818_bat_read(di, RK818_SUP_STS_REG) & BAT_EXS) ? true : false;
+}
+
+static bool is_rk818_bat_first_pwron(struct rk818_battery *di)
+{
+ u8 buf;
+
+ buf = rk818_bat_read(di, RK818_GGSTS_REG);
+ if (buf & BAT_CON) {
+ buf &= ~BAT_CON;
+ rk818_bat_write(di, RK818_GGSTS_REG, buf);
+ return true;
+ }
+
+ return false;
+}
+
+static u8 rk818_bat_get_pwroff_min(struct rk818_battery *di)
+{
+ u8 cur, last;
+
+ cur = rk818_bat_read(di, RK818_NON_ACT_TIMER_CNT_REG);
+ last = rk818_bat_read(di, RK818_NON_ACT_TIMER_CNT_SAVE_REG);
+ rk818_bat_write(di, RK818_NON_ACT_TIMER_CNT_SAVE_REG, cur);
+
+ return (cur != last) ? cur : 0;
+}
+
+static u8 is_rk818_bat_initialized(struct rk818_battery *di)
+{
+ u8 val = rk818_bat_read(di, RK818_MISC_MARK_REG);
+
+ if (val & FG_INIT) {
+ val &= ~FG_INIT;
+ rk818_bat_write(di, RK818_MISC_MARK_REG, val);
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static bool is_rk818_bat_ocv_valid(struct rk818_battery *di)
+{
+ return (!di->is_initialized && di->pwroff_min >= 30) ? true : false;
+}
+
+static void rk818_bat_init_age_algorithm(struct rk818_battery *di)
+{
+ int age_level, ocv_soc, ocv_cap, ocv_vol;
+
+ if (di->is_first_power_on || is_rk818_bat_ocv_valid(di)) {
+ DBG("<%s> enter.\n", __func__);
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ if (ocv_soc < 20) {
+ di->age_voltage = ocv_vol;
+ di->age_ocv_cap = ocv_cap;
+ di->age_ocv_soc = ocv_soc;
+ di->age_adjust_cap = 0;
+
+ if (ocv_soc <= 0)
+ di->age_level = 100;
+ else if (ocv_soc < 5)
+ di->age_level = 95;
+ else if (ocv_soc < 10)
+ di->age_level = 90;
+ else
+ di->age_level = 80;
+
+ age_level = rk818_bat_get_age_level(di);
+ if (age_level > di->age_level) {
+ di->age_allow_update = false;
+ age_level -= 5;
+ if (age_level <= 80)
+ age_level = 80;
+ rk818_bat_save_age_level(di, age_level);
+ } else {
+ di->age_allow_update = true;
+ di->age_keep_sec = get_boot_sec();
+ }
+
+ BAT_INFO("init_age_algorithm: "
+ "age_vol:%d, age_ocv_cap:%d, "
+ "age_ocv_soc:%d, old_age_level:%d, "
+ "age_allow_update:%d, new_age_level:%d\n",
+ di->age_voltage, di->age_ocv_cap,
+ ocv_soc, age_level, di->age_allow_update,
+ di->age_level);
+ }
+ }
+}
+
+static enum power_supply_property rk818_bat_props[] = {
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static int rk818_bat_get_usb_psy(struct device *dev, void *data)
+{
+ struct rk818_battery *di = data;
+ struct power_supply *psy = dev_get_drvdata(dev);
+
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ di->usb_psy = psy;
+ return 1;
+ }
+
+ return 0;
+}
+
+static int rk818_bat_get_ac_psy(struct device *dev, void *data)
+{
+ struct rk818_battery *di = data;
+ struct power_supply *psy = dev_get_drvdata(dev);
+
+ if (psy->desc->type == POWER_SUPPLY_TYPE_MAINS) {
+ di->ac_psy = psy;
+ return 1;
+ }
+
+ return 0;
+}
+
+static void rk818_bat_get_chrg_psy(struct rk818_battery *di)
+{
+ if (!di->usb_psy)
+ class_for_each_device(power_supply_class, NULL, (void *)di,
+ rk818_bat_get_usb_psy);
+ if (!di->ac_psy)
+ class_for_each_device(power_supply_class, NULL, (void *)di,
+ rk818_bat_get_ac_psy);
+}
+
+static int rk818_bat_get_charge_state(struct rk818_battery *di)
+{
+ union power_supply_propval val;
+ int ret;
+
+ if (!di->usb_psy || !di->ac_psy)
+ rk818_bat_get_chrg_psy(di);
+
+ if (di->usb_psy) {
+ ret = di->usb_psy->desc->get_property(di->usb_psy,
+ POWER_SUPPLY_PROP_ONLINE,
+ &val);
+ if (!ret)
+ di->usb_in = val.intval;
+ }
+
+ if (di->ac_psy) {
+ ret = di->ac_psy->desc->get_property(di->ac_psy,
+ POWER_SUPPLY_PROP_ONLINE,
+ &val);
+ if (!ret)
+ di->ac_in = val.intval;
+ }
+
+ DBG("%s: ac_online=%d, usb_online=%d\n",
+ __func__, di->ac_in, di->usb_in);
+
+ return (di->usb_in || di->ac_in);
+}
+
+static int rk818_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rk818_battery *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = di->current_avg * 1000;/*uA*/
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_CURRENT * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = di->voltage_avg * 1000;/*uV*/
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_VOLTAGE * 1000;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = is_rk818_bat_exist(di);
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_PRESET;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->dsoc;
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_SOC;
+ DBG("<%s>. report dsoc: %d\n", __func__, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = di->temperature;
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_TEMPERATURE;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (di->pdata->bat_mode == MODE_VIRTUAL)
+ val->intval = VIRTUAL_STATUS;
+ else if (di->dsoc == 100)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (rk818_bat_get_charge_state(di))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = di->charge_count;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = di->pdata->design_capacity * 1000;/* uAh */
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = di->voltage_max * 1000; /* uV */
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = di->current_max * 1000; /* uA */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc rk818_bat_desc = {
+ .name = "battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = rk818_bat_props,
+ .num_properties = ARRAY_SIZE(rk818_bat_props),
+ .get_property = rk818_battery_get_property,
+};
+
+static int rk818_bat_init_power_supply(struct rk818_battery *di)
+{
+ struct power_supply_config psy_cfg = { .drv_data = di, };
+
+ di->bat = devm_power_supply_register(di->dev, &rk818_bat_desc, &psy_cfg);
+ if (IS_ERR(di->bat)) {
+ dev_err(di->dev, "register bat power supply fail\n");
+ return PTR_ERR(di->bat);
+ }
+
+ return 0;
+}
+
+static void rk818_bat_save_cap(struct rk818_battery *di, int cap)
+{
+ u8 buf;
+ static u32 old_cap;
+
+ if (cap >= di->qmax)
+ cap = di->qmax;
+ if (cap <= 0)
+ cap = 0;
+ if (old_cap == cap)
+ return;
+
+ old_cap = cap;
+ buf = (cap >> 24) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG3, buf);
+ buf = (cap >> 16) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG2, buf);
+ buf = (cap >> 8) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG1, buf);
+ buf = (cap >> 0) & 0xff;
+ rk818_bat_write(di, RK818_REMAIN_CAP_REG0, buf);
+}
+
+static int rk818_bat_get_prev_cap(struct rk818_battery *di)
+{
+ int val = 0;
+
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG3) << 24;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG2) << 16;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG1) << 8;
+ val |= rk818_bat_read(di, RK818_REMAIN_CAP_REG0) << 0;
+
+ return val;
+}
+
+static void rk818_bat_save_fcc(struct rk818_battery *di, u32 fcc)
+{
+ u8 buf;
+
+ buf = (fcc >> 24) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG3, buf);
+ buf = (fcc >> 16) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG2, buf);
+ buf = (fcc >> 8) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG1, buf);
+ buf = (fcc >> 0) & 0xff;
+ rk818_bat_write(di, RK818_NEW_FCC_REG0, buf);
+
+ BAT_INFO("save fcc: %d\n", fcc);
+}
+
+static int rk818_bat_get_fcc(struct rk818_battery *di)
+{
+ u32 fcc = 0;
+
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG3) << 24;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG2) << 16;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG1) << 8;
+ fcc |= rk818_bat_read(di, RK818_NEW_FCC_REG0) << 0;
+
+ if (fcc < MIN_FCC) {
+ BAT_INFO("invalid fcc(%d), use design cap", fcc);
+ fcc = di->pdata->design_capacity;
+ rk818_bat_save_fcc(di, fcc);
+ } else if (fcc > di->pdata->design_qmax) {
+ BAT_INFO("invalid fcc(%d), use qmax", fcc);
+ fcc = di->pdata->design_qmax;
+ rk818_bat_save_fcc(di, fcc);
+ }
+
+ return fcc;
+}
+
+static void rk818_bat_init_coulomb_cap(struct rk818_battery *di, u32 capacity)
+{
+ u8 buf;
+ u32 cap;
+
+ cap = capacity * 2390 / DIV(di->res_div);
+ buf = (cap >> 24) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG3, buf);
+ buf = (cap >> 16) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG2, buf);
+ buf = (cap >> 8) & 0xff;
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG1, buf);
+ buf = ((cap >> 0) & 0xff);
+ rk818_bat_write(di, RK818_GASCNT_CAL_REG0, buf);
+
+ DBG("<%s>. new coulomb cap = %d\n", __func__, capacity);
+ di->remain_cap = capacity;
+ di->rsoc = rk818_bat_get_rsoc(di);
+}
+
+static void rk818_bat_save_dsoc(struct rk818_battery *di, u8 save_soc)
+{
+ static int last_soc = -1;
+
+ if (last_soc != save_soc) {
+ rk818_bat_write(di, RK818_SOC_REG, save_soc);
+ last_soc = save_soc;
+ }
+}
+
+static int rk818_bat_get_prev_dsoc(struct rk818_battery *di)
+{
+ return rk818_bat_read(di, RK818_SOC_REG);
+}
+
+static void rk818_bat_save_reboot_cnt(struct rk818_battery *di, u8 save_cnt)
+{
+ rk818_bat_write(di, RK818_REBOOT_CNT_REG, save_cnt);
+}
+
+static int rk818_bat_fb_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct rk818_battery *di;
+ struct fb_event *evdata = data;
+
+ if (event != FB_EARLY_EVENT_BLANK && event != FB_EVENT_BLANK)
+ return NOTIFY_OK;
+
+ di = container_of(nb, struct rk818_battery, fb_nb);
+ di->fb_blank = *(int *)evdata->data;
+
+ return 0;
+}
+
+static int rk818_bat_register_fb_notify(struct rk818_battery *di)
+{
+ memset(&di->fb_nb, 0, sizeof(di->fb_nb));
+ di->fb_nb.notifier_call = rk818_bat_fb_notifier;
+
+ return fb_register_client(&di->fb_nb);
+}
+
+static int rk818_bat_unregister_fb_notify(struct rk818_battery *di)
+{
+ return fb_unregister_client(&di->fb_nb);
+}
+
+static u8 rk818_bat_get_halt_cnt(struct rk818_battery *di)
+{
+ return rk818_bat_read(di, RK818_HALT_CNT_REG);
+}
+
+static void rk818_bat_inc_halt_cnt(struct rk818_battery *di)
+{
+ u8 cnt;
+
+ cnt = rk818_bat_read(di, RK818_HALT_CNT_REG);
+ rk818_bat_write(di, RK818_HALT_CNT_REG, ++cnt);
+}
+
+static bool is_rk818_bat_last_halt(struct rk818_battery *di)
+{
+ int pre_cap = rk818_bat_get_prev_cap(di);
+ int now_cap = rk818_bat_get_coulomb_cap(di);
+
+ /* over 10%: system halt last time */
+ if (abs(now_cap - pre_cap) > (di->fcc / 10)) {
+ rk818_bat_inc_halt_cnt(di);
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void rk818_bat_first_pwron(struct rk818_battery *di)
+{
+ int ocv_vol;
+
+ rk818_bat_save_fcc(di, di->design_cap);
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ di->fcc = rk818_bat_get_fcc(di);
+ di->nac = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ di->rsoc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ di->dsoc = di->rsoc;
+ di->is_first_on = true;
+
+ BAT_INFO("first on: dsoc=%d, rsoc=%d cap=%d, fcc=%d, ov=%d\n",
+ di->dsoc, di->rsoc, di->nac, di->fcc, ocv_vol);
+}
+
+static void rk818_bat_not_first_pwron(struct rk818_battery *di)
+{
+ int now_cap, pre_soc, pre_cap, ocv_cap, ocv_soc, ocv_vol;
+
+ di->fcc = rk818_bat_get_fcc(di);
+ pre_soc = rk818_bat_get_prev_dsoc(di);
+ pre_cap = rk818_bat_get_prev_cap(di);
+ now_cap = rk818_bat_get_coulomb_cap(di);
+ di->is_halt = is_rk818_bat_last_halt(di);
+ di->halt_cnt = rk818_bat_get_halt_cnt(di);
+ di->is_initialized = is_rk818_bat_initialized(di);
+ di->is_ocv_calib = is_rk818_bat_ocv_valid(di);
+
+ if (di->is_initialized) {
+ BAT_INFO("initialized yet..\n");
+ goto finish;
+ } else if (di->is_halt) {
+ BAT_INFO("system halt last time... cap: pre=%d, now=%d\n",
+ pre_cap, now_cap);
+ if (now_cap < 0)
+ now_cap = 0;
+ rk818_bat_init_coulomb_cap(di, now_cap);
+ pre_cap = now_cap;
+ pre_soc = di->rsoc;
+ goto finish;
+ } else if (di->is_ocv_calib) {
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ pre_cap = ocv_cap;
+ di->ocv_pre_dsoc = pre_soc;
+ di->ocv_new_dsoc = ocv_soc;
+ if (abs(ocv_soc - pre_soc) >= di->pdata->max_soc_offset) {
+ di->ocv_pre_dsoc = pre_soc;
+ di->ocv_new_dsoc = ocv_soc;
+ di->is_max_soc_offset = true;
+ BAT_INFO("trigger max soc offset, dsoc: %d -> %d\n",
+ pre_soc, ocv_soc);
+ pre_soc = ocv_soc;
+ }
+ BAT_INFO("OCV calib: cap=%d, rsoc=%d\n", ocv_cap, ocv_soc);
+ } else if (di->pwroff_min > 0) {
+ ocv_vol = rk818_bat_get_ocv_voltage(di);
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, ocv_vol);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, ocv_vol);
+ di->force_pre_dsoc = pre_soc;
+ di->force_new_dsoc = ocv_soc;
+ if (abs(ocv_soc - pre_soc) >= 80) {
+ di->is_force_calib = true;
+ BAT_INFO("dsoc force calib: %d -> %d\n",
+ pre_soc, ocv_soc);
+ pre_soc = ocv_soc;
+ pre_cap = ocv_cap;
+ }
+ }
+
+finish:
+ di->dsoc = pre_soc;
+ di->nac = pre_cap;
+ if (di->nac < 0)
+ di->nac = 0;
+
+ BAT_INFO("dsoc=%d cap=%d v=%d ov=%d rv=%d min=%d psoc=%d pcap=%d\n",
+ di->dsoc, di->nac, rk818_bat_get_avg_voltage(di),
+ rk818_bat_get_ocv_voltage(di), rk818_bat_get_relax_voltage(di),
+ di->pwroff_min, rk818_bat_get_prev_dsoc(di),
+ rk818_bat_get_prev_cap(di));
+}
+
+static bool rk818_bat_ocv_sw_reset(struct rk818_battery *di)
+{
+ u8 buf;
+
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ if (((buf & FG_RESET_LATE) && di->pwroff_min >= 30) ||
+ (buf & FG_RESET_NOW)) {
+ buf &= ~FG_RESET_LATE;
+ buf &= ~FG_RESET_NOW;
+ rk818_bat_write(di, RK818_MISC_MARK_REG, buf);
+ BAT_INFO("manual reset fuel gauge\n");
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void rk818_bat_init_rsoc(struct rk818_battery *di)
+{
+ di->is_first_power_on = is_rk818_bat_first_pwron(di);
+ di->is_sw_reset = rk818_bat_ocv_sw_reset(di);
+ di->pwroff_min = rk818_bat_get_pwroff_min(di);
+
+ if (di->is_first_power_on || di->is_sw_reset)
+ rk818_bat_first_pwron(di);
+ else
+ rk818_bat_not_first_pwron(di);
+}
+
+static u8 rk818_bat_get_chrg_status(struct rk818_battery *di)
+{
+ u8 status;
+
+ status = rk818_bat_read(di, RK818_SUP_STS_REG) & CHRG_STATUS_MSK;
+ switch (status) {
+ case CHARGE_OFF:
+ DBG("CHARGE-OFF ...\n");
+ break;
+ case DEAD_CHARGE:
+ BAT_INFO("DEAD CHARGE...\n");
+ break;
+ case TRICKLE_CHARGE:
+ BAT_INFO("TRICKLE CHARGE...\n ");
+ break;
+ case CC_OR_CV:
+ DBG("CC or CV...\n");
+ break;
+ case CHARGE_FINISH:
+ DBG("CHARGE FINISH...\n");
+ break;
+ case USB_OVER_VOL:
+ BAT_INFO("USB OVER VOL...\n");
+ break;
+ case BAT_TMP_ERR:
+ BAT_INFO("BAT TMP ERROR...\n");
+ break;
+ case TIMER_ERR:
+ BAT_INFO("TIMER ERROR...\n");
+ break;
+ case USB_EXIST:
+ BAT_INFO("USB EXIST...\n");
+ break;
+ case USB_EFF:
+ BAT_INFO("USB EFF...\n");
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return status;
+}
+
+static u8 rk818_bat_parse_fb_temperature(struct rk818_battery *di)
+{
+ u8 reg;
+ int index, fb_temp;
+
+ reg = DEFAULT_FB_TEMP;
+ fb_temp = di->pdata->fb_temp;
+ for (index = 0; index < ARRAY_SIZE(feedback_temp_array); index++) {
+ if (fb_temp < feedback_temp_array[index])
+ break;
+ reg = (index << FB_TEMP_SHIFT);
+ }
+
+ return reg;
+}
+
+static u8 rk818_bat_parse_finish_ma(struct rk818_battery *di, int fcc)
+{
+ u8 ma;
+
+ if (di->pdata->sample_res == SAMPLE_RES_10MR)
+ ma = FINISH_100MA;
+ else if (fcc > 5000)
+ ma = FINISH_250MA;
+ else if (fcc >= 4000)
+ ma = FINISH_200MA;
+ else if (fcc >= 3000)
+ ma = FINISH_150MA;
+ else
+ ma = FINISH_100MA;
+
+ return ma;
+}
+
+static void rk818_bat_init_chrg_config(struct rk818_battery *di)
+{
+ u8 usb_ctrl, chrg_ctrl2, chrg_ctrl3;
+ u8 thermal, ggcon, finish_ma, fb_temp;
+
+ finish_ma = rk818_bat_parse_finish_ma(di, di->fcc);
+ fb_temp = rk818_bat_parse_fb_temperature(di);
+
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ thermal = rk818_bat_read(di, RK818_THERMAL_REG);
+ usb_ctrl = rk818_bat_read(di, RK818_USB_CTRL_REG);
+ chrg_ctrl2 = rk818_bat_read(di, RK818_CHRG_CTRL_REG2);
+ chrg_ctrl3 = rk818_bat_read(di, RK818_CHRG_CTRL_REG3);
+
+ /* set charge finish current */
+ chrg_ctrl3 |= CHRG_TERM_DIG_SIGNAL;
+ chrg_ctrl2 &= ~FINISH_CUR_MSK;
+ chrg_ctrl2 |= finish_ma;
+
+ /* disable cccv mode */
+ chrg_ctrl3 &= ~CHRG_TIMER_CCCV_EN;
+
+ /* set feed back temperature */
+ if (di->pdata->fb_temp)
+ usb_ctrl |= CHRG_CT_EN;
+ else
+ usb_ctrl &= ~CHRG_CT_EN;
+ thermal &= ~FB_TEMP_MSK;
+ thermal |= fb_temp;
+
+ /* adc current mode */
+ ggcon |= ADC_CUR_MODE;
+
+ rk818_bat_write(di, RK818_GGCON_REG, ggcon);
+ rk818_bat_write(di, RK818_THERMAL_REG, thermal);
+ rk818_bat_write(di, RK818_USB_CTRL_REG, usb_ctrl);
+ rk818_bat_write(di, RK818_CHRG_CTRL_REG2, chrg_ctrl2);
+ rk818_bat_write(di, RK818_CHRG_CTRL_REG3, chrg_ctrl3);
+}
+
+static void rk818_bat_init_coffset(struct rk818_battery *di)
+{
+ int coffset, ioffset;
+
+ ioffset = rk818_bat_get_ioffset(di);
+ di->poffset = rk818_bat_read(di, RK818_POFFSET_REG);
+ if (!di->poffset)
+ di->poffset = DEFAULT_POFFSET;
+
+ coffset = di->poffset + ioffset;
+ if (coffset < INVALID_COFFSET_MIN || coffset > INVALID_COFFSET_MAX)
+ coffset = DEFAULT_COFFSET;
+
+ rk818_bat_set_coffset(di, coffset);
+
+ DBG("<%s>. offset: p=0x%x, i=0x%x, c=0x%x\n",
+ __func__, di->poffset, ioffset, rk818_bat_get_coffset(di));
+}
+
+static void rk818_bat_caltimer_isr(struct timer_list *t)
+{
+ struct rk818_battery *di = from_timer(di, t, caltimer);
+
+ mod_timer(&di->caltimer, jiffies + MINUTE(8) * HZ);
+ queue_delayed_work(di->bat_monitor_wq, &di->calib_delay_work,
+ msecs_to_jiffies(10));
+}
+
+static void rk818_bat_internal_calib(struct work_struct *work)
+{
+ int ioffset, poffset;
+ struct rk818_battery *di = container_of(work,
+ struct rk818_battery, calib_delay_work.work);
+
+ /* calib coffset */
+ poffset = rk818_bat_read(di, RK818_POFFSET_REG);
+ if (poffset)
+ di->poffset = poffset;
+ else
+ di->poffset = DEFAULT_POFFSET;
+
+ ioffset = rk818_bat_get_ioffset(di);
+ rk818_bat_set_coffset(di, ioffset + di->poffset);
+
+ /* calib voltage kb */
+ rk818_bat_init_voltage_kb(di);
+ BAT_INFO("caltimer: ioffset=0x%x, coffset=0x%x, poffset=%d\n",
+ ioffset, rk818_bat_get_coffset(di), di->poffset);
+}
+
+static void rk818_bat_init_caltimer(struct rk818_battery *di)
+{
+ timer_setup(&di->caltimer, rk818_bat_caltimer_isr, 0);
+ di->caltimer.expires = jiffies + MINUTE(8) * HZ;
+ add_timer(&di->caltimer);
+ INIT_DELAYED_WORK(&di->calib_delay_work, rk818_bat_internal_calib);
+}
+
+static void rk818_bat_init_zero_table(struct rk818_battery *di)
+{
+ int i, diff, min, max;
+ size_t ocv_size, length;
+
+ ocv_size = di->pdata->ocv_size;
+ length = sizeof(di->pdata->zero_table) * ocv_size;
+ di->pdata->zero_table =
+ devm_kzalloc(di->dev, length, GFP_KERNEL);
+ if (!di->pdata->zero_table) {
+ di->pdata->zero_table = di->pdata->ocv_table;
+ dev_err(di->dev, "malloc zero table fail\n");
+ return;
+ }
+
+ min = di->pdata->pwroff_vol,
+ max = di->pdata->ocv_table[ocv_size - 4];
+ diff = (max - min) / DIV(ocv_size - 1);
+ for (i = 0; i < ocv_size; i++)
+ di->pdata->zero_table[i] = min + (i * diff);
+
+ for (i = 0; i < ocv_size; i++)
+ DBG("zero[%d] = %d\n", i, di->pdata->zero_table[i]);
+
+ for (i = 0; i < ocv_size; i++)
+ DBG("ocv[%d] = %d\n", i, di->pdata->ocv_table[i]);
+}
+
+static void rk818_bat_calc_sm_linek(struct rk818_battery *di)
+{
+ int linek, current_avg;
+ u8 diff, delta;
+
+ delta = abs(di->dsoc - di->rsoc);
+ diff = delta * 3;/* speed:3/4 */
+ current_avg = rk818_bat_get_avg_current(di);
+ if (current_avg >= 0) {
+ if (di->dsoc < di->rsoc)
+ linek = 1000 * (delta + diff) / DIV(diff);
+ else if (di->dsoc > di->rsoc)
+ linek = 1000 * diff / DIV(delta + diff);
+ else
+ linek = 1000;
+ di->dbg_meet_soc = (di->dsoc >= di->rsoc) ?
+ (di->dsoc + diff) : (di->rsoc + diff);
+ } else {
+ if (di->dsoc < di->rsoc)
+ linek = -1000 * diff / DIV(delta + diff);
+ else if (di->dsoc > di->rsoc)
+ linek = -1000 * (delta + diff) / DIV(diff);
+ else
+ linek = -1000;
+ di->dbg_meet_soc = (di->dsoc >= di->rsoc) ?
+ (di->dsoc - diff) : (di->rsoc - diff);
+ }
+
+ di->sm_linek = linek;
+ di->sm_remain_cap = di->remain_cap;
+ di->dbg_calc_dsoc = di->dsoc;
+ di->dbg_calc_rsoc = di->rsoc;
+
+ DBG("<%s>.diff=%d, k=%d, cur=%d\n", __func__, diff, linek, current_avg);
+}
+
+static void rk818_bat_calc_zero_linek(struct rk818_battery *di)
+{
+ int dead_voltage, ocv_voltage;
+ int voltage_avg, current_avg, vsys;
+ int ocv_cap, dead_cap, xsoc;
+ int ocv_soc, dead_soc;
+ int pwroff_vol;
+ int i, cnt, vol_old, vol_now;
+ int org_linek = 0, min_gap_xsoc;
+
+ if ((abs(di->current_avg) < 500) && (di->dsoc > 10))
+ pwroff_vol = di->pdata->pwroff_vol + 50;
+ else
+ pwroff_vol = di->pdata->pwroff_vol;
+
+ do {
+ vol_old = rk818_bat_get_avg_voltage(di);
+ msleep(100);
+ vol_now = rk818_bat_get_avg_voltage(di);
+ cnt++;
+ } while ((vol_old == vol_now) && (cnt < 11));
+
+ voltage_avg = 0;
+ for (i = 0; i < 10; i++) {
+ voltage_avg += rk818_bat_get_avg_voltage(di);
+ msleep(100);
+ }
+
+ /* calc estimate ocv voltage */
+ voltage_avg /= 10;
+ current_avg = rk818_bat_get_avg_current(di);
+ vsys = voltage_avg + (current_avg * DEF_PWRPATH_RES) / 1000;
+
+ DBG("ZERO0: shtd_vol: org = %d, now = %d, zero_reserve_dsoc = %d\n",
+ di->pdata->pwroff_vol, pwroff_vol, di->pdata->zero_reserve_dsoc);
+
+ dead_voltage = pwroff_vol - current_avg *
+ (di->bat_res + DEF_PWRPATH_RES) / 1000;
+ ocv_voltage = voltage_avg - (current_avg * di->bat_res) / 1000;
+ DBG("ZERO0: dead_voltage(shtd) = %d, ocv_voltage(now) = %d\n",
+ dead_voltage, ocv_voltage);
+
+ /* calc estimate soc and cap */
+ dead_soc = rk818_bat_vol_to_zerosoc(di, dead_voltage);
+ dead_cap = rk818_bat_vol_to_zerocap(di, dead_voltage);
+ DBG("ZERO0: dead_soc = %d, dead_cap = %d\n",
+ dead_soc, dead_cap);
+
+ ocv_soc = rk818_bat_vol_to_zerosoc(di, ocv_voltage);
+ ocv_cap = rk818_bat_vol_to_zerocap(di, ocv_voltage);
+ DBG("ZERO0: ocv_soc = %d, ocv_cap = %d\n",
+ ocv_soc, ocv_cap);
+
+ /* xsoc: available rsoc */
+ xsoc = ocv_soc - dead_soc;
+
+ /* min_gap_xsoc: reserve xsoc */
+ if (abs(current_avg) > ZERO_LOAD_LVL1)
+ min_gap_xsoc = ZERO_GAP_XSOC3;
+ else if (abs(current_avg) > ZERO_LOAD_LVL2)
+ min_gap_xsoc = ZERO_GAP_XSOC2;
+ else
+ min_gap_xsoc = ZERO_GAP_XSOC1;
+
+ if ((xsoc <= 30) && (di->dsoc >= di->pdata->zero_reserve_dsoc))
+ min_gap_xsoc = min_gap_xsoc + ZERO_GAP_CALIB;
+
+ di->zero_remain_cap = di->remain_cap;
+ di->zero_timeout_cnt = 0;
+ if ((di->dsoc <= 1) && (xsoc > 0)) {
+ di->zero_linek = 400;
+ di->zero_drop_sec = 0;
+ } else if (xsoc >= 0) {
+ di->zero_drop_sec = 0;
+ di->zero_linek = (di->zero_dsoc + xsoc / 2) / DIV(xsoc);
+ org_linek = di->zero_linek;
+ /* battery energy mode to use up voltage */
+ if ((di->pdata->energy_mode) &&
+ (xsoc - di->dsoc >= ZERO_GAP_XSOC3) &&
+ (di->dsoc <= 10) && (di->zero_linek < 300)) {
+ di->zero_linek = 300;
+ DBG("ZERO-new: zero_linek adjust step0...\n");
+ /* reserve enough power yet, slow down any way */
+ } else if ((xsoc - di->dsoc >= min_gap_xsoc) ||
+ ((xsoc - di->dsoc >= ZERO_GAP_XSOC2) &&
+ (di->dsoc <= 10) && (xsoc > 15))) {
+ if (xsoc <= 20 &&
+ di->dsoc >= di->pdata->zero_reserve_dsoc)
+ di->zero_linek = 1200;
+ else if (xsoc - di->dsoc >= 2 * min_gap_xsoc)
+ di->zero_linek = 400;
+ else if (xsoc - di->dsoc >= 3 + min_gap_xsoc)
+ di->zero_linek = 600;
+ else
+ di->zero_linek = 800;
+ DBG("ZERO-new: zero_linek adjust step1...\n");
+ /* control zero mode beginning enter */
+ } else if ((di->zero_linek > 1800) && (di->dsoc > 70)) {
+ di->zero_linek = 1800;
+ DBG("ZERO-new: zero_linek adjust step2...\n");
+ /* dsoc close to xsoc: it must reserve power */
+ } else if ((di->zero_linek > 1000) && (di->zero_linek < 1200)) {
+ di->zero_linek = 1200;
+ DBG("ZERO-new: zero_linek adjust step3...\n");
+ /* dsoc[5~15], dsoc < xsoc */
+ } else if ((di->dsoc <= 15 && di->dsoc > 5) &&
+ (di->zero_linek <= 1200)) {
+ /* slow down */
+ if (xsoc - di->dsoc >= min_gap_xsoc)
+ di->zero_linek = 800;
+ /* reserve power */
+ else
+ di->zero_linek = 1200;
+ DBG("ZERO-new: zero_linek adjust step4...\n");
+ /* dsoc[5, 100], dsoc < xsoc */
+ } else if ((di->zero_linek < 1000) && (di->dsoc >= 5)) {
+ if ((xsoc - di->dsoc) < min_gap_xsoc) {
+ /* reserve power */
+ di->zero_linek = 1200;
+ } else {
+ if (abs(di->current_avg) > 500)/* heavy */
+ di->zero_linek = 900;
+ else
+ di->zero_linek = 1000;
+ }
+ DBG("ZERO-new: zero_linek adjust step5...\n");
+ /* dsoc[0~5], dsoc < xsoc */
+ } else if ((di->zero_linek < 1000) && (di->dsoc <= 5)) {
+ if ((xsoc - di->dsoc) <= 3)
+ di->zero_linek = 1200;
+ else
+ di->zero_linek = 800;
+ DBG("ZERO-new: zero_linek adjust step6...\n");
+ }
+ } else {
+ /* xsoc < 0 */
+ di->zero_linek = 1000;
+ if (!di->zero_drop_sec)
+ di->zero_drop_sec = get_boot_sec();
+ if (base2sec(di->zero_drop_sec) >= WAIT_DSOC_DROP_SEC) {
+ DBG("ZERO0: t=%lu\n", base2sec(di->zero_drop_sec));
+ di->zero_drop_sec = 0;
+ di->dsoc--;
+ di->zero_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
+ }
+ }
+
+ if (voltage_avg < pwroff_vol - 70) {
+ if (!di->shtd_drop_sec)
+ di->shtd_drop_sec = get_boot_sec();
+ if (base2sec(di->shtd_drop_sec) > WAIT_SHTD_DROP_SEC) {
+ BAT_INFO("voltage extreme low...soc:%d->0\n", di->dsoc);
+ di->shtd_drop_sec = 0;
+ di->dsoc = 0;
+ }
+ } else {
+ di->shtd_drop_sec = 0;
+ }
+
+ DBG("ZERO-new: org_linek=%d, zero_linek=%d, dsoc=%d, Xsoc=%d, "
+ "rsoc=%d, gap=%d, v=%d, vsys=%d\n"
+ "ZERO-new: di->zero_dsoc=%d, zero_remain_cap=%d, zero_drop=%ld, "
+ "sht_drop=%ld\n\n",
+ org_linek, di->zero_linek, di->dsoc, xsoc, di->rsoc,
+ min_gap_xsoc, voltage_avg, vsys, di->zero_dsoc, di->zero_remain_cap,
+ base2sec(di->zero_drop_sec), base2sec(di->shtd_drop_sec));
+}
+
+static void rk818_bat_finish_algo_prepare(struct rk818_battery *di)
+{
+ di->finish_base = get_boot_sec();
+ if (!di->finish_base)
+ di->finish_base = 1;
+}
+
+static void rk818_bat_smooth_algo_prepare(struct rk818_battery *di)
+{
+ int tmp_soc;
+
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc)
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc)
+ di->sm_dischrg_dsoc =
+ (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+
+ DBG("<%s>. tmp_soc=%d, dsoc=%d, dsoc:sm_dischrg=%d, sm_chrg=%d\n",
+ __func__, tmp_soc, di->dsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+
+ rk818_bat_calc_sm_linek(di);
+}
+
+static void rk818_bat_zero_algo_prepare(struct rk818_battery *di)
+{
+ int tmp_dsoc;
+
+ di->zero_timeout_cnt = 0;
+ tmp_dsoc = di->zero_dsoc / 1000;
+ if (tmp_dsoc != di->dsoc)
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+
+ DBG("<%s>. first calc, reinit linek\n", __func__);
+
+ rk818_bat_calc_zero_linek(di);
+}
+
+static void rk818_bat_calc_zero_algorithm(struct rk818_battery *di)
+{
+ int tmp_soc = 0, sm_delta_dsoc = 0;
+
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
+
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when discharge slow down, take sm chrg into calc */
+ if (di->dsoc < di->rsoc) {
+ /* take sm charge rest into calc */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_chrg_dsoc - di->dsoc * 1000;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->zero_dsoc += sm_delta_dsoc;
+ DBG("ZERO1: take sm chrg,delta=%d\n", sm_delta_dsoc);
+ }
+ }
+
+ /* when discharge speed up, take sm dischrg into calc */
+ if (di->dsoc > di->rsoc) {
+ /* take sm discharge rest into calc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_dischrg_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
+ di->zero_dsoc += sm_delta_dsoc;
+ DBG("ZERO1: take sm dischrg,delta=%d\n", sm_delta_dsoc);
+ }
+ }
+
+ /* check overflow */
+ if (di->zero_dsoc > (di->dsoc + 1) * 1000 - MIN_ACCURACY) {
+ DBG("ZERO1: zero dsoc overflow: %d\n", di->zero_dsoc);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ }
+
+ /* check new dsoc */
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ /* avoid dsoc jump when heavy load */
+ if ((di->dsoc - tmp_soc) > 1) {
+ di->dsoc--;
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ DBG("ZERO1: heavy load...\n");
+ } else {
+ di->dsoc = tmp_soc;
+ }
+ di->zero_drop_sec = 0;
+ }
+
+out:
+ DBG("ZERO1: zero_dsoc(Y0)=%d, dsoc=%d, rsoc=%d, tmp_soc=%d\n",
+ di->zero_dsoc, di->dsoc, di->rsoc, tmp_soc);
+ DBG("ZERO1: sm_dischrg_dsoc=%d, sm_chrg_dsoc=%d\n",
+ di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+}
+
+static void rk818_bat_zero_algorithm(struct rk818_battery *di)
+{
+ int delta_cap = 0, delta_soc = 0;
+
+ di->zero_timeout_cnt++;
+ delta_cap = di->zero_remain_cap - di->remain_cap;
+ delta_soc = di->zero_linek * (delta_cap * 100) / DIV(di->fcc);
+
+ DBG("ZERO1: zero_linek=%d, zero_dsoc(Y0)=%d, dsoc=%d, rsoc=%d\n"
+ "ZERO1: delta_soc(X0)=%d, delta_cap=%d, zero_remain_cap = %d\n"
+ "ZERO1: timeout_cnt=%d, sm_dischrg=%d, sm_chrg=%d\n\n",
+ di->zero_linek, di->zero_dsoc, di->dsoc, di->rsoc,
+ delta_soc, delta_cap, di->zero_remain_cap,
+ di->zero_timeout_cnt, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+
+ if ((delta_soc >= MIN_ZERO_DSOC_ACCURACY) ||
+ (di->zero_timeout_cnt > MIN_ZERO_OVERCNT) ||
+ (di->zero_linek == 0)) {
+ DBG("ZERO1:--------- enter calc -----------\n");
+ di->zero_timeout_cnt = 0;
+ di->zero_dsoc -= delta_soc;
+ rk818_bat_calc_zero_algorithm(di);
+ rk818_bat_calc_zero_linek(di);
+ }
+}
+
+static void rk818_bat_dump_time_table(struct rk818_battery *di)
+{
+ u8 i;
+ static int old_index;
+ static int old_min;
+ int mod = di->dsoc % 10;
+ int index = di->dsoc / 10;
+ u32 time;
+
+ if (rk818_bat_chrg_online(di))
+ time = base2min(di->plug_in_base);
+ else
+ time = base2min(di->plug_out_base);
+
+ if ((mod == 0) && (index > 0) && (old_index != index)) {
+ di->dbg_chrg_min[index - 1] = time - old_min;
+ old_min = time;
+ old_index = index;
+ }
+
+ for (i = 1; i < 11; i++)
+ DBG("Time[%d]=%d, ", (i * 10), di->dbg_chrg_min[i - 1]);
+ DBG("\n");
+}
+
+static void rk818_bat_debug_info(struct rk818_battery *di)
+{
+ u8 sup_tst, ggcon, ggsts, vb_mod, ts_ctrl, reboot_cnt;
+ u8 usb_ctrl, chrg_ctrl1, thermal;
+ u8 int_sts1, int_sts2;
+ u8 int_msk1, int_msk2;
+ u8 chrg_ctrl2, chrg_ctrl3, rtc, misc, dcdc_en;
+ char *work_mode[] = {"ZERO", "FINISH", "UN", "UN", "SMOOTH"};
+ char *bat_mode[] = {"BAT", "VIRTUAL"};
+
+ if (rk818_bat_chrg_online(di))
+ di->plug_out_base = get_boot_sec();
+ else
+ di->plug_in_base = get_boot_sec();
+
+ rk818_bat_dump_time_table(di);
+
+ if (!dbg_enable)
+ return;
+
+ ts_ctrl = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ misc = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ ggcon = rk818_bat_read(di, RK818_GGCON_REG);
+ ggsts = rk818_bat_read(di, RK818_GGSTS_REG);
+ sup_tst = rk818_bat_read(di, RK818_SUP_STS_REG);
+ vb_mod = rk818_bat_read(di, RK818_VB_MON_REG);
+ usb_ctrl = rk818_bat_read(di, RK818_USB_CTRL_REG);
+ chrg_ctrl1 = rk818_bat_read(di, RK818_CHRG_CTRL_REG1);
+ chrg_ctrl2 = rk818_bat_read(di, RK818_CHRG_CTRL_REG2);
+ chrg_ctrl3 = rk818_bat_read(di, RK818_CHRG_CTRL_REG3);
+ rtc = rk818_bat_read(di, 0);
+ thermal = rk818_bat_read(di, RK818_THERMAL_REG);
+ int_sts1 = rk818_bat_read(di, RK818_INT_STS_REG1);
+ int_sts2 = rk818_bat_read(di, RK818_INT_STS_REG2);
+ int_msk1 = rk818_bat_read(di, RK818_INT_STS_MSK_REG1);
+ int_msk2 = rk818_bat_read(di, RK818_INT_STS_MSK_REG2);
+ dcdc_en = rk818_bat_read(di, RK818_DCDC_EN_REG);
+ reboot_cnt = rk818_bat_read(di, RK818_REBOOT_CNT_REG);
+
+ DBG("\n------- DEBUG REGS, [Ver: %s] -------------------\n"
+ "GGCON=0x%2x, GGSTS=0x%2x, RTC=0x%2x, DCDC_EN2=0x%2x\n"
+ "SUP_STS= 0x%2x, VB_MOD=0x%2x, USB_CTRL=0x%2x\n"
+ "THERMAL=0x%2x, MISC_MARK=0x%2x, TS_CTRL=0x%2x\n"
+ "CHRG_CTRL:REG1=0x%2x, REG2=0x%2x, REG3=0x%2x\n"
+ "INT_STS: REG1=0x%2x, REG2=0x%2x\n"
+ "INT_MSK: REG1=0x%2x, REG2=0x%2x\n",
+ DRIVER_VERSION, ggcon, ggsts, rtc, dcdc_en,
+ sup_tst, vb_mod, usb_ctrl,
+ thermal, misc, ts_ctrl,
+ chrg_ctrl1, chrg_ctrl2, chrg_ctrl3,
+ int_sts1, int_sts2, int_msk1, int_msk2
+ );
+
+ DBG("###############################################################\n"
+ "Dsoc=%d, Rsoc=%d, Vavg=%d, Iavg=%d, Cap=%d, Fcc=%d, d=%d\n"
+ "K=%d, Mode=%s, Oldcap=%d, Is=%d, Ip=%d, Vs=%d\n"
+ "fb_temp=%d, bat_temp=%d, sample_res=%d, USB=%d, DC=%d\n"
+ "off:i=0x%x, c=0x%x, p=%d, Rbat=%d, age_ocv_cap=%d, fb=%d, hot=%d\n"
+ "adp:finish=%lu, boot_min=%lu, sleep_min=%lu, adc=%d, Vsys=%d\n"
+ "bat:%s, meet: soc=%d, calc: dsoc=%d, rsoc=%d, Vocv=%d\n"
+ "pwr: dsoc=%d, rsoc=%d, vol=%d, halt: st=%d, cnt=%d, reboot=%d\n"
+ "ocv_c=%d: %d -> %d; max_c=%d: %d -> %d; force_c=%d: %d -> %d\n"
+ "min=%d, init=%d, sw=%d, below0=%d, first=%d, changed=%d\n"
+ "###############################################################\n",
+ di->dsoc, di->rsoc, di->voltage_avg, di->current_avg,
+ di->remain_cap, di->fcc, di->rsoc - di->dsoc,
+ di->sm_linek, work_mode[di->work_mode], di->sm_remain_cap,
+ di->res_div * chrg_cur_sel_array[chrg_ctrl1 & 0x0f],
+ chrg_cur_input_array[usb_ctrl & 0x0f],
+ chrg_vol_sel_array[(chrg_ctrl1 & 0x70) >> 4],
+ feedback_temp_array[(thermal & 0x0c) >> 2], di->temperature,
+ di->pdata->sample_res, di->usb_in, di->ac_in,
+ rk818_bat_get_ioffset(di),
+ rk818_bat_get_coffset(di), di->poffset, di->bat_res,
+ di->age_adjust_cap, di->fb_blank, !!(thermal & HOTDIE_STS),
+ base2min(di->finish_base),
+ base2min(di->boot_base), di->sleep_sum_sec / 60,
+ di->adc_allow_update,
+ di->voltage_avg + di->current_avg * DEF_PWRPATH_RES / 1000,
+ bat_mode[di->pdata->bat_mode], di->dbg_meet_soc, di->dbg_calc_dsoc,
+ di->dbg_calc_rsoc, di->voltage_ocv, di->dbg_pwr_dsoc,
+ di->dbg_pwr_rsoc, di->dbg_pwr_vol, di->is_halt, di->halt_cnt,
+ reboot_cnt, di->is_ocv_calib, di->ocv_pre_dsoc, di->ocv_new_dsoc,
+ di->is_max_soc_offset, di->max_pre_dsoc, di->max_new_dsoc,
+ di->is_force_calib, di->force_pre_dsoc, di->force_new_dsoc,
+ di->pwroff_min, di->is_initialized, di->is_sw_reset,
+ di->dbg_cap_low0, di->is_first_on, di->last_dsoc
+ );
+}
+
+static void rk818_bat_init_capacity(struct rk818_battery *di, u32 cap)
+{
+ int delta_cap;
+
+ delta_cap = cap - di->remain_cap;
+ if (!delta_cap)
+ return;
+
+ di->age_adjust_cap += delta_cap;
+ rk818_bat_init_coulomb_cap(di, cap);
+ rk818_bat_smooth_algo_prepare(di);
+ rk818_bat_zero_algo_prepare(di);
+}
+
+static void rk818_bat_update_age_fcc(struct rk818_battery *di)
+{
+ int fcc, remain_cap, age_keep_min, lock_fcc;
+
+ lock_fcc = rk818_bat_get_coulomb_cap(di);
+ remain_cap = lock_fcc - di->age_ocv_cap - di->age_adjust_cap;
+ age_keep_min = base2min(di->age_keep_sec);
+
+ DBG("%s: lock_fcc=%d, age_ocv_cap=%d, age_adjust_cap=%d, remain_cap=%d,"
+ "age_allow_update=%d, age_keep_min=%d\n",
+ __func__, lock_fcc, di->age_ocv_cap, di->age_adjust_cap, remain_cap,
+ di->age_allow_update, age_keep_min);
+
+ if ((di->chrg_status == CHARGE_FINISH) && (di->age_allow_update) &&
+ (age_keep_min < 1200)) {
+ di->age_allow_update = false;
+ fcc = remain_cap * 100 / DIV(100 - di->age_ocv_soc);
+ BAT_INFO("lock_fcc=%d, calc_cap=%d, age: soc=%d, cap=%d, "
+ "level=%d, fcc:%d->%d?\n",
+ lock_fcc, remain_cap, di->age_ocv_soc,
+ di->age_ocv_cap, di->age_level, di->fcc, fcc);
+
+ if ((fcc < di->qmax) && (fcc > MIN_FCC)) {
+ BAT_INFO("fcc:%d->%d!\n", di->fcc, fcc);
+ di->fcc = fcc;
+ rk818_bat_init_capacity(di, di->fcc);
+ rk818_bat_save_fcc(di, di->fcc);
+ rk818_bat_save_age_level(di, di->age_level);
+ }
+ }
+}
+
+static void rk818_bat_wait_finish_sig(struct rk818_battery *di)
+{
+ int chrg_finish_vol = di->pdata->max_chrg_voltage;
+
+ if (!rk818_bat_chrg_online(di))
+ return;
+
+ if ((di->chrg_status == CHARGE_FINISH) && (di->adc_allow_update) &&
+ (di->voltage_avg > chrg_finish_vol - 150)) {
+ rk818_bat_update_age_fcc(di);
+ if (rk818_bat_adc_calib(di))
+ di->adc_allow_update = false;
+ }
+}
+
+static void rk818_bat_finish_algorithm(struct rk818_battery *di)
+{
+ unsigned long finish_sec, soc_sec;
+ int plus_soc, finish_current, rest = 0;
+
+ /* rsoc */
+ if ((di->remain_cap != di->fcc) &&
+ (rk818_bat_get_chrg_status(di) == CHARGE_FINISH)) {
+ di->age_adjust_cap += (di->fcc - di->remain_cap);
+ rk818_bat_init_coulomb_cap(di, di->fcc);
+ }
+
+ /* dsoc */
+ if (di->dsoc < 100) {
+ if (!di->finish_base)
+ di->finish_base = get_boot_sec();
+ finish_current = (di->rsoc - di->dsoc) > FINISH_MAX_SOC_DELAY ?
+ FINISH_CHRG_CUR2 : FINISH_CHRG_CUR1;
+ finish_sec = base2sec(di->finish_base);
+ soc_sec = di->fcc * 3600 / 100 / DIV(finish_current);
+ plus_soc = finish_sec / DIV(soc_sec);
+ if (finish_sec > soc_sec) {
+ rest = finish_sec % soc_sec;
+ di->dsoc += plus_soc;
+ di->finish_base = get_boot_sec();
+ if (di->finish_base > rest)
+ di->finish_base = get_boot_sec() - rest;
+ }
+ DBG("<%s>.CHARGE_FINISH:dsoc<100,dsoc=%d\n"
+ "soc_time=%lu, sec_finish=%lu, plus_soc=%d, rest=%d\n",
+ __func__, di->dsoc, soc_sec, finish_sec, plus_soc, rest);
+ }
+}
+
+static void rk818_bat_calc_smooth_dischrg(struct rk818_battery *di)
+{
+ int tmp_soc = 0, sm_delta_dsoc = 0, zero_delta_dsoc = 0;
+
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
+
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when dischrge slow down, take sm charge rest into calc */
+ if (di->dsoc < di->rsoc) {
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_chrg_dsoc - di->dsoc * 1000;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->sm_dischrg_dsoc += sm_delta_dsoc;
+ DBG("<%s>. take sm dischrg, delta=%d\n",
+ __func__, sm_delta_dsoc);
+ }
+ }
+
+ /* when discharge speed up, take zero discharge rest into calc */
+ if (di->dsoc > di->rsoc) {
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ zero_delta_dsoc = di->zero_dsoc - ((di->dsoc + 1) *
+ 1000 - MIN_ACCURACY);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ di->sm_dischrg_dsoc += zero_delta_dsoc;
+ DBG("<%s>. take zero schrg, delta=%d\n",
+ __func__, zero_delta_dsoc);
+ }
+ }
+
+ /* check up overflow */
+ if ((di->sm_dischrg_dsoc) > ((di->dsoc + 1) * 1000 - MIN_ACCURACY)) {
+ DBG("<%s>. dischrg_dsoc up overflow\n", __func__);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) *
+ 1000 - MIN_ACCURACY;
+ }
+
+ /* check new dsoc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ di->dsoc = tmp_soc;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ }
+out:
+ DBG("<%s>. dsoc=%d, rsoc=%d, dsoc:sm_dischrg=%d, sm_chrg=%d, zero=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc,
+ di->zero_dsoc);
+
+}
+
+static void rk818_bat_calc_smooth_chrg(struct rk818_battery *di)
+{
+ int tmp_soc = 0, sm_delta_dsoc = 0, zero_delta_dsoc = 0;
+
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ goto out;
+
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d\n", __func__, di->dsoc, di->rsoc);
+ /* when charge slow down, take zero & sm dischrg into calc */
+ if (di->dsoc > di->rsoc) {
+ /* take sm discharge rest into calc */
+ tmp_soc = di->sm_dischrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ sm_delta_dsoc = di->sm_dischrg_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 -
+ MIN_ACCURACY;
+ di->sm_chrg_dsoc += sm_delta_dsoc;
+ DBG("<%s>. take sm dischrg, delta=%d\n",
+ __func__, sm_delta_dsoc);
+ }
+
+ /* take zero discharge rest into calc */
+ tmp_soc = di->zero_dsoc / 1000;
+ if (tmp_soc == di->dsoc) {
+ zero_delta_dsoc = di->zero_dsoc -
+ ((di->dsoc + 1) * 1000 - MIN_ACCURACY);
+ di->zero_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ di->sm_chrg_dsoc += zero_delta_dsoc;
+ DBG("<%s>. take zero dischrg, delta=%d\n",
+ __func__, zero_delta_dsoc);
+ }
+ }
+
+ /* check down overflow */
+ if (di->sm_chrg_dsoc < di->dsoc * 1000) {
+ DBG("<%s>. chrg_dsoc down overflow\n", __func__);
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ }
+
+ /* check new dsoc */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc != di->dsoc) {
+ di->dsoc = tmp_soc;
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ }
+out:
+ DBG("<%s>.dsoc=%d, rsoc=%d, dsoc: sm_dischrg=%d, sm_chrg=%d, zero=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sm_dischrg_dsoc, di->sm_chrg_dsoc,
+ di->zero_dsoc);
+}
+
+static void rk818_bat_smooth_algorithm(struct rk818_battery *di)
+{
+ int ydsoc = 0, delta_cap = 0, old_cap = 0;
+ unsigned long tgt_sec = 0;
+
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+
+ /* full charge: slow down */
+ if ((di->dsoc == 99) && (di->chrg_status == CC_OR_CV) &&
+ (di->current_avg > 0)) {
+ di->sm_linek = FULL_CHRG_K;
+ /* terminal charge, slow down */
+ } else if ((di->current_avg >= TERM_CHRG_CURR) &&
+ (di->chrg_status == CC_OR_CV) && (di->dsoc >= TERM_CHRG_DSOC)) {
+ di->sm_linek = TERM_CHRG_K;
+ DBG("<%s>. terminal mode..\n", __func__);
+ /* simulate charge, speed up */
+ } else if ((di->current_avg <= SIMULATE_CHRG_CURR) &&
+ (di->current_avg > 0) && (di->chrg_status == CC_OR_CV) &&
+ (di->dsoc < TERM_CHRG_DSOC) &&
+ ((di->rsoc - di->dsoc) >= SIMULATE_CHRG_INTV)) {
+ di->sm_linek = SIMULATE_CHRG_K;
+ DBG("<%s>. simulate mode..\n", __func__);
+ } else {
+ /* charge and discharge switch */
+ if ((di->sm_linek * di->current_avg <= 0) ||
+ (di->sm_linek == TERM_CHRG_K) ||
+ (di->sm_linek == FULL_CHRG_K) ||
+ (di->sm_linek == SIMULATE_CHRG_K)) {
+ DBG("<%s>. linek mode, retinit sm linek..\n", __func__);
+ rk818_bat_calc_sm_linek(di);
+ }
+ }
+
+ old_cap = di->sm_remain_cap;
+ /*
+ * when dsoc equal rsoc(not include full, term, simulate case),
+ * sm_linek should change to -1000/1000 smoothly to avoid dsoc+1/-1
+ * right away, so change it after flat seconds
+ */
+ if ((di->dsoc == di->rsoc) && (abs(di->sm_linek) != 1000) &&
+ (di->sm_linek != FULL_CHRG_K && di->sm_linek != TERM_CHRG_K &&
+ di->sm_linek != SIMULATE_CHRG_K)) {
+ if (!di->flat_match_sec)
+ di->flat_match_sec = get_boot_sec();
+ tgt_sec = di->fcc * 3600 / 100 / DIV(abs(di->current_avg)) / 3;
+ if (base2sec(di->flat_match_sec) >= tgt_sec) {
+ di->flat_match_sec = 0;
+ di->sm_linek = (di->current_avg >= 0) ? 1000 : -1000;
+ }
+ DBG("<%s>. flat_sec=%ld, tgt_sec=%ld, sm_k=%d\n", __func__,
+ base2sec(di->flat_match_sec), tgt_sec, di->sm_linek);
+ } else {
+ di->flat_match_sec = 0;
+ }
+
+ /* abs(k)=1000 or dsoc=100, stop calc */
+ if ((abs(di->sm_linek) == 1000) || (di->current_avg >= 0 &&
+ di->chrg_status == CC_OR_CV && di->dsoc >= 100)) {
+ DBG("<%s>. sm_linek=%d\n", __func__, di->sm_linek);
+ if (abs(di->sm_linek) == 1000) {
+ di->dsoc = di->rsoc;
+ di->sm_linek = (di->sm_linek > 0) ? 1000 : -1000;
+ DBG("<%s>. dsoc == rsoc, sm_linek=%d\n",
+ __func__, di->sm_linek);
+ }
+ di->sm_remain_cap = di->remain_cap;
+ di->sm_chrg_dsoc = di->dsoc * 1000;
+ di->sm_dischrg_dsoc = (di->dsoc + 1) * 1000 - MIN_ACCURACY;
+ DBG("<%s>. sm_dischrg_dsoc=%d, sm_chrg_dsoc=%d\n",
+ __func__, di->sm_dischrg_dsoc, di->sm_chrg_dsoc);
+ } else {
+ delta_cap = di->remain_cap - di->sm_remain_cap;
+ if (delta_cap == 0) {
+ DBG("<%s>. delta_cap = 0\n", __func__);
+ return;
+ }
+ ydsoc = di->sm_linek * abs(delta_cap) * 100 / DIV(di->fcc);
+ if (ydsoc == 0) {
+ DBG("<%s>. ydsoc = 0\n", __func__);
+ return;
+ }
+ di->sm_remain_cap = di->remain_cap;
+
+ DBG("<%s>. k=%d, ydsoc=%d; cap:old=%d, new:%d; delta_cap=%d\n",
+ __func__, di->sm_linek, ydsoc, old_cap,
+ di->sm_remain_cap, delta_cap);
+
+ /* discharge mode */
+ if (ydsoc < 0) {
+ di->sm_dischrg_dsoc += ydsoc;
+ rk818_bat_calc_smooth_dischrg(di);
+ /* charge mode */
+ } else {
+ di->sm_chrg_dsoc += ydsoc;
+ rk818_bat_calc_smooth_chrg(di);
+ }
+
+ if (di->s2r) {
+ di->s2r = false;
+ rk818_bat_calc_sm_linek(di);
+ }
+ }
+}
+
+/*
+ * cccv and finish switch all the time will cause dsoc freeze,
+ * if so, do finish chrg, 100ma is less than min finish_ma.
+ */
+static bool rk818_bat_fake_finish_mode(struct rk818_battery *di)
+{
+ if ((di->rsoc == 100) && (rk818_bat_get_chrg_status(di) == CC_OR_CV) &&
+ (abs(di->current_avg) <= 100))
+ return true;
+ else
+ return false;
+}
+
+static void rk818_bat_display_smooth(struct rk818_battery *di)
+{
+ /* discharge: reinit "zero & smooth" algorithm to avoid handling dsoc */
+ if (di->s2r && !di->sleep_chrg_online) {
+ DBG("s2r: discharge, reset algorithm...\n");
+ di->s2r = false;
+ rk818_bat_zero_algo_prepare(di);
+ rk818_bat_smooth_algo_prepare(di);
+ return;
+ }
+
+ if (di->work_mode == MODE_FINISH) {
+ DBG("step1: charge finish...\n");
+ rk818_bat_finish_algorithm(di);
+ if ((rk818_bat_get_chrg_status(di) != CHARGE_FINISH) &&
+ !rk818_bat_fake_finish_mode(di)) {
+ if ((di->current_avg < 0) &&
+ (di->voltage_avg < di->pdata->zero_algorithm_vol)) {
+ DBG("step1: change to zero mode...\n");
+ rk818_bat_zero_algo_prepare(di);
+ di->work_mode = MODE_ZERO;
+ } else {
+ DBG("step1: change to smooth mode...\n");
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
+ }
+ }
+ } else if (di->work_mode == MODE_ZERO) {
+ DBG("step2: zero algorithm...\n");
+ rk818_bat_zero_algorithm(di);
+ if ((di->voltage_avg >= di->pdata->zero_algorithm_vol + 50) ||
+ (di->current_avg >= 0)) {
+ DBG("step2: change to smooth mode...\n");
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
+ } else if ((rk818_bat_get_chrg_status(di) == CHARGE_FINISH) ||
+ rk818_bat_fake_finish_mode(di)) {
+ DBG("step2: change to finish mode...\n");
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ }
+ } else {
+ DBG("step3: smooth algorithm...\n");
+ rk818_bat_smooth_algorithm(di);
+ if ((di->current_avg < 0) &&
+ (di->voltage_avg < di->pdata->zero_algorithm_vol)) {
+ DBG("step3: change to zero mode...\n");
+ rk818_bat_zero_algo_prepare(di);
+ di->work_mode = MODE_ZERO;
+ } else if ((rk818_bat_get_chrg_status(di) == CHARGE_FINISH) ||
+ rk818_bat_fake_finish_mode(di)) {
+ DBG("step3: change to finish mode...\n");
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ }
+ }
+}
+
+static void rk818_bat_relax_vol_calib(struct rk818_battery *di)
+{
+ int soc, cap, vol;
+
+ vol = di->voltage_relax;
+ soc = rk818_bat_vol_to_ocvsoc(di, vol);
+ cap = rk818_bat_vol_to_ocvcap(di, vol);
+ rk818_bat_init_capacity(di, cap);
+ BAT_INFO("sleep ocv calib: rsoc=%d, cap=%d\n", soc, cap);
+}
+
+static void rk818_bat_relife_age_flag(struct rk818_battery *di)
+{
+ u8 ocv_soc, ocv_cap, soc_level;
+
+ if (di->voltage_relax <= 0)
+ return;
+
+ ocv_soc = rk818_bat_vol_to_ocvsoc(di, di->voltage_relax);
+ ocv_cap = rk818_bat_vol_to_ocvcap(di, di->voltage_relax);
+ DBG("<%s>. ocv_soc=%d, min=%lu, vol=%d\n", __func__,
+ ocv_soc, di->sleep_dischrg_sec / 60, di->voltage_relax);
+
+ /* sleep enough time and ocv_soc enough low */
+ if (!di->age_allow_update && ocv_soc <= 10) {
+ di->age_voltage = di->voltage_relax;
+ di->age_ocv_cap = ocv_cap;
+ di->age_ocv_soc = ocv_soc;
+ di->age_adjust_cap = 0;
+
+ if (ocv_soc <= 1)
+ di->age_level = 100;
+ else if (ocv_soc < 5)
+ di->age_level = 90;
+ else
+ di->age_level = 80;
+
+ soc_level = rk818_bat_get_age_level(di);
+ if (soc_level > di->age_level) {
+ di->age_allow_update = false;
+ } else {
+ di->age_allow_update = true;
+ di->age_keep_sec = get_boot_sec();
+ }
+
+ BAT_INFO("resume: age_vol:%d, age_ocv_cap:%d, age_ocv_soc:%d, "
+ "soc_level:%d, age_allow_update:%d, "
+ "age_level:%d\n",
+ di->age_voltage, di->age_ocv_cap, ocv_soc, soc_level,
+ di->age_allow_update, di->age_level);
+ }
+}
+
+static int rk818_bat_sleep_dischrg(struct rk818_battery *di)
+{
+ bool ocv_soc_updated = false;
+ int tgt_dsoc, gap_soc, sleep_soc = 0;
+ int pwroff_vol = di->pdata->pwroff_vol;
+ unsigned long sleep_sec = di->sleep_dischrg_sec;
+
+ DBG("<%s>. enter: dsoc=%d, rsoc=%d, rv=%d, v=%d, sleep_min=%lu\n",
+ __func__, di->dsoc, di->rsoc, di->voltage_relax,
+ di->voltage_avg, sleep_sec / 60);
+
+ if (di->voltage_relax >= di->voltage_avg) {
+ rk818_bat_relax_vol_calib(di);
+ rk818_bat_restart_relax(di);
+ rk818_bat_relife_age_flag(di);
+ ocv_soc_updated = true;
+ }
+
+ /* handle dsoc */
+ if (di->dsoc <= di->rsoc) {
+ di->sleep_sum_cap = (SLP_CURR_MIN * sleep_sec / 3600);
+ sleep_soc = di->sleep_sum_cap * 100 / DIV(di->fcc);
+ tgt_dsoc = di->dsoc - sleep_soc;
+ if (sleep_soc > 0) {
+ BAT_INFO("calib0: rl=%d, dl=%d, intval=%d\n",
+ di->rsoc, di->dsoc, sleep_soc);
+ if (di->dsoc < 5) {
+ di->dsoc--;
+ } else if ((tgt_dsoc < 5) && (di->dsoc >= 5)) {
+ if (di->dsoc == 5)
+ di->dsoc--;
+ else
+ di->dsoc = 5;
+ } else if (tgt_dsoc > 5) {
+ di->dsoc = tgt_dsoc;
+ }
+ }
+
+ DBG("%s: dsoc<=rsoc, sum_cap=%d==>sleep_soc=%d, tgt_dsoc=%d\n",
+ __func__, di->sleep_sum_cap, sleep_soc, tgt_dsoc);
+ } else {
+ /* di->dsoc > di->rsoc */
+ di->sleep_sum_cap = (SLP_CURR_MAX * sleep_sec / 3600);
+ sleep_soc = di->sleep_sum_cap / DIV(di->fcc / 100);
+ gap_soc = di->dsoc - di->rsoc;
+
+ BAT_INFO("calib1: rsoc=%d, dsoc=%d, intval=%d\n",
+ di->rsoc, di->dsoc, sleep_soc);
+ if (gap_soc > sleep_soc) {
+ if ((gap_soc - 5) > (sleep_soc * 2))
+ di->dsoc -= (sleep_soc * 2);
+ else
+ di->dsoc -= sleep_soc;
+ } else {
+ di->dsoc = di->rsoc;
+ }
+
+ DBG("%s: dsoc>rsoc, sum_cap=%d=>sleep_soc=%d, gap_soc=%d\n",
+ __func__, di->sleep_sum_cap, sleep_soc, gap_soc);
+ }
+
+ if (di->voltage_avg <= pwroff_vol - 70) {
+ di->dsoc = 0;
+ rk_send_wakeup_key();
+ BAT_INFO("low power sleeping, shutdown... %d\n", di->dsoc);
+ }
+
+ if (ocv_soc_updated && sleep_soc && (di->rsoc - di->dsoc) < 5 &&
+ di->dsoc < 40) {
+ di->dsoc--;
+ BAT_INFO("low power sleeping, reserved... %d\n", di->dsoc);
+ }
+
+ if (di->dsoc <= 0) {
+ di->dsoc = 0;
+ rk_send_wakeup_key();
+ BAT_INFO("sleep dsoc is %d...\n", di->dsoc);
+ }
+
+ DBG("<%s>. out: dsoc=%d, rsoc=%d, sum_cap=%d\n",
+ __func__, di->dsoc, di->rsoc, di->sleep_sum_cap);
+
+ return sleep_soc;
+}
+
+static void rk818_bat_power_supply_changed(struct rk818_battery *di)
+{
+ u8 status, thermal;
+ static int old_soc = -1;
+
+ if (di->dsoc > 100)
+ di->dsoc = 100;
+ else if (di->dsoc < 0)
+ di->dsoc = 0;
+
+ if (di->dsoc == old_soc)
+ return;
+
+ thermal = rk818_bat_read(di, RK818_THERMAL_REG);
+ status = rk818_bat_read(di, RK818_SUP_STS_REG);
+ status = (status & CHRG_STATUS_MSK) >> 4;
+ old_soc = di->dsoc;
+ di->last_dsoc = di->dsoc;
+ power_supply_changed(di->bat);
+ BAT_INFO("changed: dsoc=%d, rsoc=%d, v=%d, ov=%d c=%d, "
+ "cap=%d, f=%d, st=%s, hotdie=%d\n",
+ di->dsoc, di->rsoc, di->voltage_avg, di->voltage_ocv,
+ di->current_avg, di->remain_cap, di->fcc, bat_status[status],
+ !!(thermal & HOTDIE_STS));
+
+ BAT_INFO("dl=%d, rl=%d, v=%d, halt=%d, halt_n=%d, max=%d, "
+ "init=%d, sw=%d, calib=%d, below0=%d, force=%d\n",
+ di->dbg_pwr_dsoc, di->dbg_pwr_rsoc, di->dbg_pwr_vol,
+ di->is_halt, di->halt_cnt, di->is_max_soc_offset,
+ di->is_initialized, di->is_sw_reset, di->is_ocv_calib,
+ di->dbg_cap_low0, di->is_force_calib);
+}
+
+static u8 rk818_bat_check_reboot(struct rk818_battery *di)
+{
+ u8 cnt;
+
+ cnt = rk818_bat_read(di, RK818_REBOOT_CNT_REG);
+ cnt++;
+
+ if (cnt >= REBOOT_MAX_CNT) {
+ BAT_INFO("reboot: %d --> %d\n", di->dsoc, di->rsoc);
+ di->dsoc = di->rsoc;
+ if (di->dsoc > 100)
+ di->dsoc = 100;
+ else if (di->dsoc < 0)
+ di->dsoc = 0;
+ rk818_bat_save_dsoc(di, di->dsoc);
+ cnt = REBOOT_MAX_CNT;
+ }
+
+ rk818_bat_save_reboot_cnt(di, cnt);
+ DBG("reboot cnt: %d\n", cnt);
+
+ return cnt;
+}
+
+static void rk818_bat_rsoc_daemon(struct rk818_battery *di)
+{
+ int est_vol, remain_cap;
+ static unsigned long sec;
+
+ if ((di->remain_cap < 0) && (di->fb_blank != 0)) {
+ if (!sec)
+ sec = get_boot_sec();
+ // wake_lock_timeout(&di->wake_lock,
+ // (di->pdata->monitor_sec + 1) * HZ);
+
+ DBG("sec=%ld, hold_sec=%ld\n", sec, base2sec(sec));
+ if (base2sec(sec) >= 60) {
+ sec = 0;
+ di->dbg_cap_low0++;
+ est_vol = di->voltage_avg -
+ (di->bat_res * di->current_avg) / 1000;
+ remain_cap = rk818_bat_vol_to_ocvcap(di, est_vol);
+ rk818_bat_init_capacity(di, remain_cap);
+ BAT_INFO("adjust cap below 0 --> %d, rsoc=%d\n",
+ di->remain_cap, di->rsoc);
+ // wake_unlock(&di->wake_lock);
+ }
+ } else {
+ sec = 0;
+ }
+}
+
+static void rk818_bat_update_info(struct rk818_battery *di)
+{
+ int is_charging;
+
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->chrg_status = rk818_bat_get_chrg_status(di);
+ is_charging = rk818_bat_get_charge_state(di);
+ if (is_charging != di->is_charging) {
+ di->is_charging = is_charging;
+ if (is_charging)
+ di->charge_count++;
+ }
+ if (di->voltage_avg > di->voltage_max)
+ di->voltage_max = di->voltage_avg;
+ if (di->current_avg > di->current_max)
+ di->current_max = di->current_avg;
+
+ /* smooth charge */
+ if (di->remain_cap > di->fcc) {
+ di->sm_remain_cap -= (di->remain_cap - di->fcc);
+ DBG("<%s>. cap: remain=%d, sm_remain=%d\n",
+ __func__, di->remain_cap, di->sm_remain_cap);
+ rk818_bat_init_coulomb_cap(di, di->fcc);
+ }
+
+ if (di->chrg_status != CHARGE_FINISH)
+ di->finish_base = get_boot_sec();
+
+ /*
+ * we need update fcc in continuous charging state, if discharge state
+ * keep at least 2 hour, we decide not to update fcc, so clear the
+ * fcc update flag: age_allow_update.
+ */
+ if (base2min(di->plug_out_base) > 120)
+ di->age_allow_update = false;
+
+ /* do adc calib: status must from cccv mode to finish mode */
+ if (di->chrg_status == CC_OR_CV) {
+ di->adc_allow_update = true;
+ di->adc_calib_cnt = 0;
+ }
+}
+
+static void rk818_bat_init_ts1_detect(struct rk818_battery *di)
+{
+ u8 buf;
+ u32 *ntc_table = di->pdata->ntc_table;
+
+ if (!di->pdata->ntc_size)
+ return;
+
+ /* select ua */
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ buf &= ~TS1_CUR_MSK;
+ /* chose suitable UA for temperature detect */
+ if (ntc_table[0] < NTC_80UA_MAX_MEASURE) {
+ di->pdata->ntc_factor = NTC_CALC_FACTOR_80UA;
+ di->pdata->ntc_uA = 80;
+ buf |= ADC_CUR_80UA;
+ } else if (ntc_table[0] < NTC_60UA_MAX_MEASURE) {
+ di->pdata->ntc_factor = NTC_CALC_FACTOR_60UA;
+ di->pdata->ntc_uA = 60;
+ buf |= ADC_CUR_60UA;
+ } else if (ntc_table[0] < NTC_40UA_MAX_MEASURE) {
+ di->pdata->ntc_factor = NTC_CALC_FACTOR_40UA;
+ di->pdata->ntc_uA = 40;
+ buf |= ADC_CUR_40UA;
+ } else {
+ di->pdata->ntc_factor = NTC_CALC_FACTOR_20UA;
+ di->pdata->ntc_uA = 20;
+ buf |= ADC_CUR_20UA;
+ }
+ rk818_bat_write(di, RK818_TS_CTRL_REG, buf);
+
+ /* enable ADC_TS1_EN */
+ buf = rk818_bat_read(di, RK818_ADC_CTRL_REG);
+ buf |= ADC_TS1_EN;
+ rk818_bat_write(di, RK818_ADC_CTRL_REG, buf);
+}
+
+/*
+ * Due to hardware design issue, Vdelta = "(R_sample + R_other) * I_avg" will be
+ * included into TS1 adc value. We must subtract it to get correct adc value.
+ * The solution:
+ *
+ * (1) calculate Vdelta:
+ *
+ * adc1 - Vdelta ua1 (adc2 * ua1) - (adc1 * ua2)
+ * ------------- = ----- ==> equals: Vdelta = -----------------------------
+ * adc2 - Vdelta ua2 ua1 - ua2
+ *
+ *
+ * (2) calculate correct ADC value:
+ *
+ * charging: ADC = adc1 - abs(Vdelta);
+ * discharging: ADC = adc1 + abs(Vdelta);
+ */
+static int rk818_bat_get_ntc_res(struct rk818_battery *di)
+{
+ int adc1 = 0, adc2 = 0;
+ int ua1, ua2, v_delta, res, val;
+ u8 buf;
+
+ /* read sample ua1 */
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ DBG("<%s>. read adc1, sample uA=%d\n",
+ __func__, ((buf & 0x03) + 1) * 20);
+
+ /* read adc adc1 */
+ ua1 = di->pdata->ntc_uA;
+ adc1 |= rk818_bat_read(di, RK818_TS1_ADC_REGL) << 0;
+ adc1 |= rk818_bat_read(di, RK818_TS1_ADC_REGH) << 8;
+
+ /* chose reference UA for adc2 */
+ ua2 = (ua1 != 20) ? 20 : 40;
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ buf &= ~TS1_CUR_MSK;
+ buf |= ((ua2 - 20) / 20);
+ rk818_bat_write(di, RK818_TS_CTRL_REG, buf);
+
+ /* read adc adc2 */
+ msleep(1000);
+
+ /* read sample ua2 */
+ buf = rk818_bat_read(di, RK818_TS_CTRL_REG);
+ DBG("<%s>. read adc2, sample uA=%d\n",
+ __func__, ((buf & 0x03) + 1) * 20);
+
+ adc2 |= rk818_bat_read(di, RK818_TS1_ADC_REGL) << 0;
+ adc2 |= rk818_bat_read(di, RK818_TS1_ADC_REGH) << 8;
+
+ DBG("<%s>. ua1=%d, ua2=%d, adc1=%d, adc2=%d\n",
+ __func__, ua1, ua2, adc1, adc2);
+
+ /* calculate delta voltage */
+ if (adc2 != adc1)
+ v_delta = abs((adc2 * ua1 - adc1 * ua2) / (ua2 - ua1));
+ else
+ v_delta = 0;
+
+ /* considering current avg direction, calcuate real adc value */
+ val = (di->current_avg >= 0) ? (adc1 - v_delta) : (adc1 + v_delta);
+
+ DBG("<%s>. Iavg=%d, Vdelta=%d, Vadc=%d\n",
+ __func__, di->current_avg, v_delta, val);
+
+ res = val * di->pdata->ntc_factor;
+
+ DBG("<%s>. val=%d, ntc_res=%d, ntc_factor=%d, Rdelta=%d\n",
+ __func__, val, res, di->pdata->ntc_factor,
+ v_delta * di->pdata->ntc_factor);
+
+ DBG("<%s>. t=[%d'C(%d) ~ %dC(%d)]\n", __func__,
+ di->pdata->ntc_degree_from, di->pdata->ntc_table[0],
+ di->pdata->ntc_degree_from + di->pdata->ntc_size - 1,
+ di->pdata->ntc_table[di->pdata->ntc_size - 1]);
+
+ rk818_bat_init_ts1_detect(di);
+
+ return res;
+}
+
+static BLOCKING_NOTIFIER_HEAD(rk818_bat_notifier_chain);
+
+int rk818_bat_temp_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&rk818_bat_notifier_chain, nb);
+}
+
+int rk818_bat_temp_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&rk818_bat_notifier_chain, nb);
+}
+
+static void rk818_bat_temp_notifier_callback(int temp)
+{
+ blocking_notifier_call_chain(&rk818_bat_notifier_chain, temp, NULL);
+}
+
+static void rk818_bat_update_temperature(struct rk818_battery *di)
+{
+ static int old_temp, first_time = 1;
+ u32 ntc_size, *ntc_table;
+ int i, res, temp;
+
+ ntc_table = di->pdata->ntc_table;
+ ntc_size = di->pdata->ntc_size;
+ di->temperature = VIRTUAL_TEMPERATURE;
+
+ if (ntc_size) {
+ res = rk818_bat_get_ntc_res(di);
+ if (res < ntc_table[ntc_size - 1]) {
+ di->temperature = di->pdata->ntc_degree_from +
+ di->pdata->ntc_size - 1;
+ BAT_INFO("bat ntc upper max degree: R=%d\n", res);
+ } else if (res > ntc_table[0]) {
+ di->temperature = di->pdata->ntc_degree_from;
+ BAT_INFO("bat ntc lower min degree: R=%d\n", res);
+ } else {
+ for (i = 0; i < ntc_size; i++) {
+ if (res >= ntc_table[i])
+ break;
+ }
+
+ /* if first in, init old_temp */
+ temp = (i + di->pdata->ntc_degree_from) * 10;
+ if (first_time == 1) {
+ di->temperature = temp;
+ old_temp = temp;
+ first_time = 0;
+ }
+
+ /*
+ * compare with old one, it's invalid when over 50
+ * and we should use old data.
+ */
+ if (abs(temp - old_temp) > 50)
+ temp = old_temp;
+ else
+ old_temp = temp;
+
+ di->temperature = temp;
+ DBG("<%s>. temperature = %d\n",
+ __func__, di->temperature);
+ rk818_bat_temp_notifier_callback(di->temperature / 10);
+ }
+ }
+}
+
+static void rk818_bat_init_dsoc_algorithm(struct rk818_battery *di)
+{
+ u8 buf;
+ int16_t rest = 0;
+ unsigned long soc_sec;
+ const char *mode_name[] = { "MODE_ZERO", "MODE_FINISH",
+ "MODE_SMOOTH_CHRG", "MODE_SMOOTH_DISCHRG", "MODE_SMOOTH", };
+
+ /* get rest */
+ rest |= rk818_bat_read(di, RK818_CALC_REST_REGH) << 8;
+ rest |= rk818_bat_read(di, RK818_CALC_REST_REGL) << 0;
+
+ /* get mode */
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ di->algo_rest_mode = (buf & ALGO_REST_MODE_MSK) >> ALGO_REST_MODE_SHIFT;
+
+ if (rk818_bat_get_chrg_status(di) == CHARGE_FINISH) {
+ if (di->algo_rest_mode == MODE_FINISH) {
+ soc_sec = di->fcc * 3600 / 100 / FINISH_CHRG_CUR1;
+ if ((rest / DIV(soc_sec)) > 0) {
+ if (di->dsoc < 100) {
+ di->dsoc++;
+ di->algo_rest_val = rest % soc_sec;
+ BAT_INFO("algorithm rest(%d) dsoc "
+ "inc: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ } else {
+ /* charge speed up */
+ if ((rest / 1000) > 0 && rk818_bat_chrg_online(di)) {
+ if (di->dsoc < di->rsoc) {
+ di->dsoc++;
+ di->algo_rest_val = rest % 1000;
+ BAT_INFO("algorithm rest(%d) dsoc inc: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ /* discharge speed up */
+ } else if (((rest / 1000) < 0) && !rk818_bat_chrg_online(di)) {
+ if (di->dsoc > di->rsoc) {
+ di->dsoc--;
+ di->algo_rest_val = rest % 1000;
+ BAT_INFO("algorithm rest(%d) dsoc sub: %d\n",
+ rest, di->dsoc);
+ } else {
+ di->algo_rest_val = 0;
+ }
+ } else {
+ di->algo_rest_val = rest;
+ }
+ }
+
+ if (di->dsoc >= 100)
+ di->dsoc = 100;
+ else if (di->dsoc <= 0)
+ di->dsoc = 0;
+
+ /* init current mode */
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ if (rk818_bat_get_chrg_status(di) == CHARGE_FINISH) {
+ rk818_bat_finish_algo_prepare(di);
+ di->work_mode = MODE_FINISH;
+ } else {
+ rk818_bat_smooth_algo_prepare(di);
+ di->work_mode = MODE_SMOOTH;
+ }
+
+ DBG("<%s>. init: org_rest=%d, rest=%d, mode=%s; "
+ "doc(x1000): zero=%d, chrg=%d, dischrg=%d, finish=%lu\n",
+ __func__, rest, di->algo_rest_val, mode_name[di->algo_rest_mode],
+ di->zero_dsoc, di->sm_chrg_dsoc, di->sm_dischrg_dsoc,
+ di->finish_base);
+}
+
+static void rk818_bat_save_algo_rest(struct rk818_battery *di)
+{
+ u8 buf, mode;
+ int16_t algo_rest = 0;
+ int tmp_soc;
+ int zero_rest = 0, sm_chrg_rest = 0;
+ int sm_dischrg_rest = 0, finish_rest = 0;
+ const char *mode_name[] = { "MODE_ZERO", "MODE_FINISH",
+ "MODE_SMOOTH_CHRG", "MODE_SMOOTH_DISCHRG", "MODE_SMOOTH", };
+
+ /* zero dischrg */
+ tmp_soc = (di->zero_dsoc) / 1000;
+ if (tmp_soc == di->dsoc)
+ zero_rest = di->zero_dsoc - ((di->dsoc + 1) * 1000 -
+ MIN_ACCURACY);
+
+ /* sm chrg */
+ tmp_soc = di->sm_chrg_dsoc / 1000;
+ if (tmp_soc == di->dsoc)
+ sm_chrg_rest = di->sm_chrg_dsoc - di->dsoc * 1000;
+
+ /* sm dischrg */
+ tmp_soc = (di->sm_dischrg_dsoc) / 1000;
+ if (tmp_soc == di->dsoc)
+ sm_dischrg_rest = di->sm_dischrg_dsoc - ((di->dsoc + 1) * 1000 -
+ MIN_ACCURACY);
+
+ /* last time is also finish chrg, then add last rest */
+ if (di->algo_rest_mode == MODE_FINISH && di->algo_rest_val)
+ finish_rest = base2sec(di->finish_base) + di->algo_rest_val;
+ else
+ finish_rest = base2sec(di->finish_base);
+
+ /* total calc */
+ if ((rk818_bat_chrg_online(di) && (di->dsoc > di->rsoc)) ||
+ (!rk818_bat_chrg_online(di) && (di->dsoc < di->rsoc)) ||
+ (di->dsoc == di->rsoc)) {
+ di->algo_rest_val = 0;
+ algo_rest = 0;
+ DBG("<%s>. step1..\n", __func__);
+ } else if (di->work_mode == MODE_FINISH) {
+ algo_rest = finish_rest;
+ DBG("<%s>. step2..\n", __func__);
+ } else if (di->algo_rest_mode == MODE_FINISH) {
+ algo_rest = zero_rest + sm_dischrg_rest + sm_chrg_rest;
+ DBG("<%s>. step3..\n", __func__);
+ } else {
+ if (rk818_bat_chrg_online(di) && (di->dsoc < di->rsoc))
+ algo_rest = sm_chrg_rest + di->algo_rest_val;
+ else if (!rk818_bat_chrg_online(di) && (di->dsoc > di->rsoc))
+ algo_rest = zero_rest + sm_dischrg_rest +
+ di->algo_rest_val;
+ else
+ algo_rest = zero_rest + sm_dischrg_rest + sm_chrg_rest +
+ di->algo_rest_val;
+ DBG("<%s>. step4..\n", __func__);
+ }
+
+ /* check mode */
+ if ((di->work_mode == MODE_FINISH) || (di->work_mode == MODE_ZERO)) {
+ mode = di->work_mode;
+ } else {/* MODE_SMOOTH */
+ if (di->sm_linek > 0)
+ mode = MODE_SMOOTH_CHRG;
+ else
+ mode = MODE_SMOOTH_DISCHRG;
+ }
+
+ /* save mode */
+ buf = rk818_bat_read(di, RK818_MISC_MARK_REG);
+ buf &= ~ALGO_REST_MODE_MSK;
+ buf |= (mode << ALGO_REST_MODE_SHIFT);
+ rk818_bat_write(di, RK818_MISC_MARK_REG, buf);
+
+ /* save rest */
+ buf = (algo_rest >> 8) & 0xff;
+ rk818_bat_write(di, RK818_CALC_REST_REGH, buf);
+ buf = (algo_rest >> 0) & 0xff;
+ rk818_bat_write(di, RK818_CALC_REST_REGL, buf);
+
+ DBG("<%s>. rest: algo=%d, mode=%s, last_rest=%d; zero=%d, "
+ "chrg=%d, dischrg=%d, finish=%lu\n",
+ __func__, algo_rest, mode_name[mode], di->algo_rest_val, zero_rest,
+ sm_chrg_rest, sm_dischrg_rest, base2sec(di->finish_base));
+}
+
+static void rk818_bat_save_data(struct rk818_battery *di)
+{
+ rk818_bat_save_dsoc(di, di->dsoc);
+ rk818_bat_save_cap(di, di->remain_cap);
+ rk818_bat_save_algo_rest(di);
+}
+
+static void rk818_battery_work(struct work_struct *work)
+{
+ struct rk818_battery *di =
+ container_of(work, struct rk818_battery, bat_delay_work.work);
+
+ rk818_bat_update_info(di);
+ rk818_bat_wait_finish_sig(di);
+ rk818_bat_rsoc_daemon(di);
+ rk818_bat_update_temperature(di);
+ rk818_bat_display_smooth(di);
+ rk818_bat_power_supply_changed(di);
+ rk818_bat_save_data(di);
+ rk818_bat_debug_info(di);
+
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(di->monitor_ms));
+}
+
+static irqreturn_t rk818_vb_low_irq(int irq, void *bat)
+{
+ struct rk818_battery *di = (struct rk818_battery *)bat;
+
+ di->dsoc = 0;
+ rk_send_wakeup_key();
+ BAT_INFO("lower power yet, power off system! v=%d, c=%d, dsoc=%d\n",
+ di->voltage_avg, di->current_avg, di->dsoc);
+
+ return IRQ_HANDLED;
+}
+
+static void rk818_bat_init_sysfs(struct rk818_battery *di)
+{
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(rk818_bat_attr); i++) {
+ ret = sysfs_create_file(&di->dev->kobj,
+ &rk818_bat_attr[i].attr);
+ if (ret)
+ dev_err(di->dev, "create bat node(%s) error\n",
+ rk818_bat_attr[i].attr.name);
+ }
+}
+
+static int rk818_bat_init_irqs(struct rk818_battery *di)
+{
+ struct rk808 *rk818 = di->rk818;
+ struct platform_device *pdev = di->pdev;
+ int ret, vb_lo_irq;
+
+ vb_lo_irq = regmap_irq_get_virq(rk818->irq_data, RK818_IRQ_VB_LO);
+ if (vb_lo_irq < 0) {
+ dev_err(di->dev, "vb_lo_irq request failed!\n");
+ return vb_lo_irq;
+ }
+
+ ret = devm_request_threaded_irq(di->dev, vb_lo_irq, NULL,
+ rk818_vb_low_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "rk818_vb_low", di);
+ if (ret) {
+ dev_err(&pdev->dev, "vb_lo_irq request failed!\n");
+ return ret;
+ }
+ enable_irq_wake(vb_lo_irq);
+
+ return 0;
+}
+
+static void rk818_bat_init_info(struct rk818_battery *di)
+{
+ di->design_cap = di->pdata->design_capacity;
+ di->qmax = di->pdata->design_qmax;
+ di->bat_res = di->pdata->bat_res;
+ di->monitor_ms = di->pdata->monitor_sec * TIMER_MS_COUNTS;
+ di->boot_base = POWER_ON_SEC_BASE;
+ di->res_div = (di->pdata->sample_res == SAMPLE_RES_20MR) ?
+ SAMPLE_RES_DIV1 : SAMPLE_RES_DIV2;
+}
+
+static time64_t rk818_get_rtc_sec(void)
+{
+ int err;
+ struct rtc_time tm;
+ struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+
+ err = rtc_read_time(rtc, &tm);
+ if (err) {
+ dev_err(rtc->dev.parent, "read hardware clk failed\n");
+ return 0;
+ }
+
+ err = rtc_valid_tm(&tm);
+ if (err) {
+ dev_err(rtc->dev.parent, "invalid date time\n");
+ return 0;
+ }
+
+ return rtc_tm_to_time64(&tm);
+}
+
+static int rk818_bat_rtc_sleep_sec(struct rk818_battery *di)
+{
+ int interval_sec;
+
+ interval_sec = rk818_get_rtc_sec() - di->rtc_base;
+
+ return (interval_sec > 0) ? interval_sec : 0;
+}
+
+static void rk818_bat_set_shtd_vol(struct rk818_battery *di)
+{
+ u8 val;
+
+ /* set vbat lowest 3.0v shutdown */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= ~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK);
+ val |= (RK818_VBAT_LOW_3V0 | EN_VABT_LOW_SHUT_DOWN);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+
+ /* disable low irq */
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1,
+ VB_LOW_INT_EN, VB_LOW_INT_EN);
+}
+
+static void rk818_bat_init_fg(struct rk818_battery *di)
+{
+ rk818_bat_enable_gauge(di);
+ rk818_bat_init_voltage_kb(di);
+ rk818_bat_init_coffset(di);
+ rk818_bat_set_relax_sample(di);
+ rk818_bat_set_ioffset_sample(di);
+ rk818_bat_set_ocv_sample(di);
+ rk818_bat_init_ts1_detect(di);
+ rk818_bat_init_rsoc(di);
+ rk818_bat_init_coulomb_cap(di, di->nac);
+ rk818_bat_init_age_algorithm(di);
+ rk818_bat_init_chrg_config(di);
+ rk818_bat_set_shtd_vol(di);
+ rk818_bat_init_zero_table(di);
+ rk818_bat_init_caltimer(di);
+ rk818_bat_init_dsoc_algorithm(di);
+
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->voltage_ocv = rk818_bat_get_ocv_voltage(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->dbg_pwr_dsoc = di->dsoc;
+ di->dbg_pwr_rsoc = di->rsoc;
+ di->dbg_pwr_vol = di->voltage_avg;
+
+ rk818_bat_dump_regs(di, 0x99, 0xee);
+ DBG("nac=%d cap=%d ov=%d v=%d rv=%d dl=%d rl=%d c=%d\n",
+ di->nac, di->remain_cap, di->voltage_ocv, di->voltage_avg,
+ di->voltage_relax, di->dsoc, di->rsoc, di->current_avg);
+}
+
+#ifdef CONFIG_OF
+static int rk818_bat_parse_dt(struct rk818_battery *di)
+{
+ u32 out_value;
+ int length, ret;
+ size_t size;
+ struct device_node *np = di->dev->of_node;
+ struct battery_platform_data *pdata;
+ struct device *dev = di->dev;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ di->pdata = pdata;
+ /* init default param */
+ pdata->bat_res = DEFAULT_BAT_RES;
+ pdata->monitor_sec = DEFAULT_MONITOR_SEC;
+ pdata->pwroff_vol = DEFAULT_PWROFF_VOL_THRESD;
+ pdata->sleep_exit_current = DEFAULT_SLP_EXIT_CUR;
+ pdata->sleep_enter_current = DEFAULT_SLP_ENTER_CUR;
+ pdata->bat_mode = MODE_BATTARY;
+ pdata->max_soc_offset = DEFAULT_MAX_SOC_OFFSET;
+ pdata->sample_res = DEFAULT_SAMPLE_RES;
+ pdata->energy_mode = DEFAULT_ENERGY_MODE;
+ pdata->fb_temp = DEFAULT_FB_TEMP;
+ pdata->zero_reserve_dsoc = DEFAULT_ZERO_RESERVE_DSOC;
+
+ /* parse necessary param */
+ if (!of_find_property(np, "ocv_table", &length)) {
+ dev_err(dev, "ocv_table not found!\n");
+ return -EINVAL;
+ }
+
+ pdata->ocv_size = length / sizeof(u32);
+ if (pdata->ocv_size <= 0) {
+ dev_err(dev, "invalid ocv table\n");
+ return -EINVAL;
+ }
+
+ size = sizeof(*pdata->ocv_table) * pdata->ocv_size;
+ pdata->ocv_table = devm_kzalloc(di->dev, size, GFP_KERNEL);
+ if (!pdata->ocv_table)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, "ocv_table",
+ pdata->ocv_table,
+ pdata->ocv_size);
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_read_u32(np, "design_capacity", &out_value);
+ if (ret < 0) {
+ dev_err(dev, "design_capacity not found!\n");
+ return ret;
+ }
+ pdata->design_capacity = out_value;
+
+ ret = of_property_read_u32(np, "design_qmax", &out_value);
+ if (ret < 0) {
+ dev_err(dev, "design_qmax not found!\n");
+ return ret;
+ }
+ pdata->design_qmax = out_value;
+ ret = of_property_read_u32(np, "max_chrg_voltage", &out_value);
+ if (ret < 0) {
+ dev_err(dev, "max_chrg_voltage missing!\n");
+ return ret;
+ }
+ pdata->max_chrg_voltage = out_value;
+ if (out_value >= 4300)
+ pdata->zero_algorithm_vol = DEFAULT_ALGR_VOL_THRESD2;
+ else
+ pdata->zero_algorithm_vol = DEFAULT_ALGR_VOL_THRESD1;
+
+ ret = of_property_read_u32(np, "fb_temperature", &pdata->fb_temp);
+ if (ret < 0)
+ dev_err(dev, "fb_temperature missing!\n");
+
+ ret = of_property_read_u32(np, "sample_res", &pdata->sample_res);
+ if (ret < 0)
+ dev_err(dev, "sample_res missing!\n");
+
+ ret = of_property_read_u32(np, "energy_mode", &pdata->energy_mode);
+ if (ret < 0)
+ dev_err(dev, "energy_mode missing!\n");
+
+ ret = of_property_read_u32(np, "max_soc_offset",
+ &pdata->max_soc_offset);
+ if (ret < 0)
+ dev_err(dev, "max_soc_offset missing!\n");
+
+ ret = of_property_read_u32(np, "monitor_sec", &pdata->monitor_sec);
+ if (ret < 0)
+ dev_err(dev, "monitor_sec missing!\n");
+
+ ret = of_property_read_u32(np, "zero_algorithm_vol",
+ &pdata->zero_algorithm_vol);
+ if (ret < 0)
+ dev_err(dev, "zero_algorithm_vol missing!\n");
+
+ ret = of_property_read_u32(np, "zero_reserve_dsoc",
+ &pdata->zero_reserve_dsoc);
+
+ ret = of_property_read_u32(np, "virtual_power", &pdata->bat_mode);
+ if (ret < 0)
+ dev_err(dev, "virtual_power missing!\n");
+
+ ret = of_property_read_u32(np, "bat_res", &pdata->bat_res);
+ if (ret < 0)
+ dev_err(dev, "bat_res missing!\n");
+
+ ret = of_property_read_u32(np, "sleep_enter_current",
+ &pdata->sleep_enter_current);
+ if (ret < 0)
+ dev_err(dev, "sleep_enter_current missing!\n");
+
+ ret = of_property_read_u32(np, "sleep_exit_current",
+ &pdata->sleep_exit_current);
+ if (ret < 0)
+ dev_err(dev, "sleep_exit_current missing!\n");
+
+ ret = of_property_read_u32(np, "power_off_thresd", &pdata->pwroff_vol);
+ if (ret < 0)
+ dev_err(dev, "power_off_thresd missing!\n");
+
+ if (!of_find_property(np, "ntc_table", &length)) {
+ pdata->ntc_size = 0;
+ } else {
+ /* get ntc degree base value */
+ ret = of_property_read_u32_index(np, "ntc_degree_from", 1,
+ &pdata->ntc_degree_from);
+ if (ret) {
+ dev_err(dev, "invalid ntc_degree_from\n");
+ return -EINVAL;
+ }
+
+ of_property_read_u32_index(np, "ntc_degree_from", 0,
+ &out_value);
+ if (out_value)
+ pdata->ntc_degree_from = -pdata->ntc_degree_from;
+
+ pdata->ntc_size = length / sizeof(u32);
+ }
+
+ if (pdata->ntc_size) {
+ size = sizeof(*pdata->ntc_table) * pdata->ntc_size;
+ pdata->ntc_table = devm_kzalloc(di->dev, size, GFP_KERNEL);
+ if (!pdata->ntc_table)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, "ntc_table",
+ pdata->ntc_table,
+ pdata->ntc_size);
+ if (ret < 0)
+ return ret;
+ }
+
+ DBG("the battery dts info dump:\n"
+ "bat_res:%d\n"
+ "design_capacity:%d\n"
+ "design_qmax :%d\n"
+ "sleep_enter_current:%d\n"
+ "sleep_exit_current:%d\n"
+ "zero_algorithm_vol:%d\n"
+ "zero_reserve_dsoc:%d\n"
+ "monitor_sec:%d\n"
+ "max_soc_offset:%d\n"
+ "virtual_power:%d\n"
+ "pwroff_vol:%d\n"
+ "sample_res:%d\n"
+ "ntc_size=%d\n"
+ "ntc_degree_from:%d\n"
+ "ntc_degree_to:%d\n",
+ pdata->bat_res, pdata->design_capacity, pdata->design_qmax,
+ pdata->sleep_enter_current, pdata->sleep_exit_current,
+ pdata->zero_algorithm_vol, pdata->zero_reserve_dsoc,
+ pdata->monitor_sec,
+ pdata->max_soc_offset, pdata->bat_mode, pdata->pwroff_vol,
+ pdata->sample_res, pdata->ntc_size, pdata->ntc_degree_from,
+ pdata->ntc_degree_from + pdata->ntc_size - 1
+ );
+
+ return 0;
+}
+#else
+static int rk818_bat_parse_dt(struct rk818_battery *di)
+{
+ return -ENODEV;
+}
+#endif
+
+static const struct of_device_id rk818_battery_of_match[] = {
+ {.compatible = "rk818-battery",},
+ { },
+};
+
+static int rk818_battery_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(rk818_battery_of_match, &pdev->dev);
+ struct rk818_battery *di;
+ struct rk808 *rk818 = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to find matching dt id\n");
+ return -ENODEV;
+ }
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ di->rk818 = rk818;
+ di->pdev = pdev;
+ di->dev = &pdev->dev;
+ di->regmap = rk818->regmap;
+ platform_set_drvdata(pdev, di);
+
+ ret = rk818_bat_parse_dt(di);
+ if (ret < 0) {
+ dev_err(di->dev, "rk818 battery parse dt failed!\n");
+ return ret;
+ }
+
+ if (!is_rk818_bat_exist(di)) {
+ di->pdata->bat_mode = MODE_VIRTUAL;
+ dev_err(di->dev, "no battery, virtual power mode\n");
+ }
+
+ ret = rk818_bat_init_irqs(di);
+ if (ret != 0) {
+ dev_err(di->dev, "rk818 bat init irqs failed!\n");
+ return ret;
+ }
+
+ ret = rk818_bat_init_power_supply(di);
+ if (ret) {
+ dev_err(di->dev, "rk818 power supply register failed!\n");
+ return ret;
+ }
+
+ rk818_bat_init_info(di);
+ rk818_bat_init_fg(di);
+ rk818_bat_init_sysfs(di);
+ rk818_bat_register_fb_notify(di);
+ //wake_lock_init(&di->wake_lock, WAKE_LOCK_SUSPEND, "rk818_bat_lock");
+ di->bat_monitor_wq = alloc_ordered_workqueue("%s",
+ WQ_MEM_RECLAIM | WQ_FREEZABLE, "rk818-bat-monitor-wq");
+ INIT_DELAYED_WORK(&di->bat_delay_work, rk818_battery_work);
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(TIMER_MS_COUNTS * 5));
+
+ BAT_INFO("driver version %s\n", DRIVER_VERSION);
+
+ return ret;
+}
+
+static int rk818_battery_suspend(struct platform_device *dev,
+ pm_message_t state)
+{
+ struct rk818_battery *di = platform_get_drvdata(dev);
+ u8 val, st;
+
+ cancel_delayed_work_sync(&di->bat_delay_work);
+
+ di->s2r = false;
+ di->sleep_chrg_online = rk818_bat_chrg_online(di);
+ di->sleep_chrg_status = rk818_bat_get_chrg_status(di);
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ di->rtc_base = rk818_get_rtc_sec();
+ rk818_bat_save_data(di);
+ st = (rk818_bat_read(di, RK818_SUP_STS_REG) & CHRG_STATUS_MSK) >> 4;
+
+ /* if not CHARGE_FINISH, reinit finish_base.
+ * avoid sleep loop between suspend and resume
+ */
+ if (di->sleep_chrg_status != CHARGE_FINISH)
+ di->finish_base = get_boot_sec();
+
+ /* avoid: enter suspend from MODE_ZERO: load from heavy to light */
+ if ((di->work_mode == MODE_ZERO) &&
+ (di->sleep_chrg_online) && (di->current_avg >= 0)) {
+ DBG("suspend: MODE_ZERO exit...\n");
+ /* it need't do prepare for mode finish and smooth, it will
+ * be done in display_smooth
+ */
+ if (di->sleep_chrg_status == CHARGE_FINISH) {
+ di->work_mode = MODE_FINISH;
+ di->finish_base = get_boot_sec();
+ } else {
+ di->work_mode = MODE_SMOOTH;
+ rk818_bat_smooth_algo_prepare(di);
+ }
+ }
+
+ /* set vbat low than 3.4v to generate a wakeup irq */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= (~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK));
+ val |= (RK818_VBAT_LOW_3V4 | EN_VBAT_LOW_IRQ);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1, VB_LOW_INT_EN, 0);
+
+ BAT_INFO("suspend: dl=%d rl=%d c=%d v=%d cap=%d at=%ld ch=%d st=%s\n",
+ di->dsoc, di->rsoc, di->current_avg,
+ rk818_bat_get_avg_voltage(di), rk818_bat_get_coulomb_cap(di),
+ di->sleep_dischrg_sec, di->sleep_chrg_online, bat_status[st]);
+
+ return 0;
+}
+
+static int rk818_battery_resume(struct platform_device *dev)
+{
+ struct rk818_battery *di = platform_get_drvdata(dev);
+ int interval_sec, time_step, pwroff_vol;
+ u8 val, st;
+
+ di->s2r = true;
+ di->current_avg = rk818_bat_get_avg_current(di);
+ di->voltage_relax = rk818_bat_get_relax_voltage(di);
+ di->voltage_avg = rk818_bat_get_avg_voltage(di);
+ di->remain_cap = rk818_bat_get_coulomb_cap(di);
+ di->rsoc = rk818_bat_get_rsoc(di);
+ interval_sec = rk818_bat_rtc_sleep_sec(di);
+ di->sleep_sum_sec += interval_sec;
+ pwroff_vol = di->pdata->pwroff_vol;
+ st = (rk818_bat_read(di, RK818_SUP_STS_REG) & CHRG_STATUS_MSK) >> 4;
+
+ if (!di->sleep_chrg_online) {
+ /* only add up discharge sleep seconds */
+ di->sleep_dischrg_sec += interval_sec;
+ if (di->voltage_avg <= pwroff_vol + 50)
+ time_step = DISCHRG_TIME_STEP1;
+ else
+ time_step = DISCHRG_TIME_STEP2;
+ }
+
+ BAT_INFO("resume: dl=%d rl=%d c=%d v=%d rv=%d "
+ "cap=%d dt=%d at=%ld ch=%d st=%s\n",
+ di->dsoc, di->rsoc, di->current_avg, di->voltage_avg,
+ di->voltage_relax, rk818_bat_get_coulomb_cap(di), interval_sec,
+ di->sleep_dischrg_sec, di->sleep_chrg_online, bat_status[st]);
+
+ /* sleep: enough time and discharge */
+ if ((di->sleep_dischrg_sec > time_step) && (!di->sleep_chrg_online)) {
+ if (rk818_bat_sleep_dischrg(di))
+ di->sleep_dischrg_sec = 0;
+ }
+
+ rk818_bat_save_data(di);
+
+ /* set vbat lowest 3.0v shutdown */
+ val = rk818_bat_read(di, RK818_VB_MON_REG);
+ val &= ~(VBAT_LOW_VOL_MASK | VBAT_LOW_ACT_MASK);
+ val |= (RK818_VBAT_LOW_3V0 | EN_VABT_LOW_SHUT_DOWN);
+ rk818_bat_write(di, RK818_VB_MON_REG, val);
+ rk818_bat_set_bits(di, RK818_INT_STS_MSK_REG1,
+ VB_LOW_INT_EN, VB_LOW_INT_EN);
+
+ /* charge/lowpower lock: for battery work to update dsoc and rsoc */
+ // if ((di->sleep_chrg_online) ||
+ // (!di->sleep_chrg_online && di->voltage_avg < di->pdata->pwroff_vol))
+ // wake_lock_timeout(&di->wake_lock, msecs_to_jiffies(2000));
+
+ queue_delayed_work(di->bat_monitor_wq, &di->bat_delay_work,
+ msecs_to_jiffies(1000));
+
+ return 0;
+}
+
+static void rk818_battery_shutdown(struct platform_device *dev)
+{
+ u8 cnt = 0;
+ struct rk818_battery *di = platform_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&di->bat_delay_work);
+ cancel_delayed_work_sync(&di->calib_delay_work);
+ rk818_bat_unregister_fb_notify(di);
+ del_timer(&di->caltimer);
+ if (base2sec(di->boot_base) < REBOOT_PERIOD_SEC)
+ cnt = rk818_bat_check_reboot(di);
+ else
+ rk818_bat_save_reboot_cnt(di, 0);
+
+ BAT_INFO("shutdown: dl=%d rl=%d c=%d v=%d cap=%d f=%d ch=%d n=%d "
+ "mode=%d rest=%d\n",
+ di->dsoc, di->rsoc, di->current_avg, di->voltage_avg,
+ di->remain_cap, di->fcc, rk818_bat_chrg_online(di), cnt,
+ di->algo_rest_mode, di->algo_rest_val);
+}
+
+static struct platform_driver rk818_battery_driver = {
+ .probe = rk818_battery_probe,
+ .suspend = rk818_battery_suspend,
+ .resume = rk818_battery_resume,
+ .shutdown = rk818_battery_shutdown,
+ .driver = {
+ .name = "rk818-battery",
+ .of_match_table = rk818_battery_of_match,
+ },
+};
+
+static int __init battery_init(void)
+{
+ return platform_driver_register(&rk818_battery_driver);
+}
+fs_initcall_sync(battery_init);
+
+static void __exit battery_exit(void)
+{
+ platform_driver_unregister(&rk818_battery_driver);
+}
+module_exit(battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk818-battery");
+MODULE_AUTHOR("chenjh<chenjh@rock-chips.com>");
\ No newline at end of file
diff --git a/drivers/power/supply/rk818_battery.h b/drivers/power/supply/rk818_battery.h
new file mode 100644
index 00000000..2f4430a
--- /dev/null
+++ b/drivers/power/supply/rk818_battery.h
@@ -0,0 +1,168 @@
+/*
+ * rk818_battery.h: fuel gauge driver structures
+ *
+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
+ * Author: chenjh <chenjh@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef RK818_BATTERY
+#define RK818_BATTERY
+
+/* RK818_INT_STS_MSK_REG2 */
+#define PLUG_IN_MSK BIT(0)
+#define PLUG_OUT_MSK BIT(1)
+#define CHRG_CVTLMT_INT_MSK BIT(6)
+
+/* RK818_TS_CTRL_REG */
+#define GG_EN BIT(7)
+#define ADC_CUR_EN BIT(6)
+#define ADC_TS1_EN BIT(5)
+#define ADC_TS2_EN BIT(4)
+#define TS1_CUR_MSK 0x03
+
+/* RK818_GGCON */
+#define OCV_SAMP_MIN_MSK 0x0c
+#define OCV_SAMP_8MIN (0x00 << 2)
+
+#define ADC_CAL_MIN_MSK 0x30
+#define ADC_CAL_8MIN (0x00 << 4)
+#define ADC_CUR_MODE BIT(1)
+
+/* RK818_GGSTS */
+#define BAT_CON BIT(4)
+#define RELAX_VOL1_UPD BIT(3)
+#define RELAX_VOL2_UPD BIT(2)
+#define RELAX_VOL12_UPD_MSK (RELAX_VOL1_UPD | RELAX_VOL2_UPD)
+
+/* RK818_SUP_STS_REG */
+#define CHRG_STATUS_MSK 0x70
+#define BAT_EXS BIT(7)
+#define CHARGE_OFF (0x0 << 4)
+#define DEAD_CHARGE (0x1 << 4)
+#define TRICKLE_CHARGE (0x2 << 4)
+#define CC_OR_CV (0x3 << 4)
+#define CHARGE_FINISH (0x4 << 4)
+#define USB_OVER_VOL (0x5 << 4)
+#define BAT_TMP_ERR (0x6 << 4)
+#define TIMER_ERR (0x7 << 4)
+#define USB_VLIMIT_EN BIT(3)
+#define USB_CLIMIT_EN BIT(2)
+#define USB_EXIST BIT(1)
+#define USB_EFF BIT(0)
+
+/* RK818_USB_CTRL_REG */
+#define CHRG_CT_EN BIT(7)
+#define FINISH_CUR_MSK 0xc0
+#define TEMP_105C (0x02 << 2)
+#define FINISH_100MA (0x00 << 6)
+#define FINISH_150MA (0x01 << 6)
+#define FINISH_200MA (0x02 << 6)
+#define FINISH_250MA (0x03 << 6)
+
+/* RK818_CHRG_CTRL_REG3 */
+#define CHRG_TERM_MODE_MSK BIT(5)
+#define CHRG_TERM_ANA_SIGNAL (0 << 5)
+#define CHRG_TERM_DIG_SIGNAL BIT(5)
+#define CHRG_TIMER_CCCV_EN BIT(2)
+#define CHRG_EN BIT(7)
+
+/* RK818_VB_MON_REG */
+#define RK818_VBAT_LOW_3V0 0x02
+#define RK818_VBAT_LOW_3V4 0x06
+#define PLUG_IN_STS BIT(6)
+
+/* RK818_THERMAL_REG */
+#define FB_TEMP_MSK 0x0c
+#define HOTDIE_STS BIT(1)
+
+/* RK818_INT_STS_MSK_REG1 */
+#define VB_LOW_INT_EN BIT(1)
+
+/* RK818_MISC_MARK_REG */
+#define FG_INIT BIT(5)
+#define FG_RESET_LATE BIT(4)
+#define FG_RESET_NOW BIT(3)
+#define ALGO_REST_MODE_MSK (0xc0)
+#define ALGO_REST_MODE_SHIFT 6
+
+/* bit shift */
+#define FB_TEMP_SHIFT 2
+
+/* parse ocv table param */
+#define TIMER_MS_COUNTS 1000
+#define MAX_PERCENTAGE 100
+#define MAX_INTERPOLATE 1000
+#define MAX_INT 0x7FFF
+
+#define DRIVER_VERSION "7.1"
+
+struct battery_platform_data {
+ u32 *ocv_table;
+ u32 *zero_table;
+ u32 *ntc_table;
+ u32 ocv_size;
+ u32 max_chrg_voltage;
+ u32 ntc_size;
+ int ntc_degree_from;
+ u32 pwroff_vol;
+ u32 monitor_sec;
+ u32 zero_algorithm_vol;
+ u32 zero_reserve_dsoc;
+ u32 bat_res;
+ u32 design_capacity;
+ u32 design_qmax;
+ u32 sleep_enter_current;
+ u32 sleep_exit_current;
+ u32 max_soc_offset;
+ u32 sample_res;
+ u32 bat_mode;
+ u32 fb_temp;
+ u32 energy_mode;
+ u32 cccv_hour;
+ u32 ntc_uA;
+ u32 ntc_factor;
+};
+
+enum work_mode {
+ MODE_ZERO = 0,
+ MODE_FINISH,
+ MODE_SMOOTH_CHRG,
+ MODE_SMOOTH_DISCHRG,
+ MODE_SMOOTH,
+};
+
+enum bat_mode {
+ MODE_BATTARY = 0,
+ MODE_VIRTUAL,
+};
+
+static const u16 feedback_temp_array[] = {
+ 85, 95, 105, 115
+};
+
+static const u16 chrg_vol_sel_array[] = {
+ 4050, 4100, 4150, 4200, 4250, 4300, 4350
+};
+
+static const u16 chrg_cur_sel_array[] = {
+ 1000, 1200, 1400, 1600, 1800, 2000, 2250, 2400, 2600, 2800, 3000
+};
+
+static const u16 chrg_cur_input_array[] = {
+ 450, 80, 850, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000
+};
+
+void kernel_power_off(void);
+int rk818_bat_temp_notifier_register(struct notifier_block *nb);
+int rk818_bat_temp_notifier_unregister(struct notifier_block *nb);
+
+#endif
\ No newline at end of file
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 2ec0520..5e33996 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -138,6 +138,8 @@ enum rk818_reg {
RK818_ID_OTG_SWITCH,
};
+#define RK818_VB_MON_REG 0x21
+#define RK818_THERMAL_REG 0x22
#define RK818_DCDC_EN_REG 0x23
#define RK818_LDO_EN_REG 0x24
#define RK818_SLEEP_SET_OFF_REG1 0x25
@@ -184,13 +186,90 @@ enum rk818_reg {
#define RK818_INT_STS_REG2 0x4e
#define RK818_INT_STS_MSK_REG2 0x4f
#define RK818_IO_POL_REG 0x50
+#define RK818_OTP_VDD_EN_REG 0x51
#define RK818_H5V_EN_REG 0x52
#define RK818_SLEEP_SET_OFF_REG3 0x53
#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54
#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55
#define RK818_BOOST_CTRL_REG 0x56
-#define RK818_DCDC_ILMAX 0x90
+#define RK818_DCDC_ILMAX_REG 0x90
+#define RK818_CHRG_COMP_REG 0x9a
+#define RK818_SUP_STS_REG 0xa0
#define RK818_USB_CTRL_REG 0xa1
+#define RK818_CHRG_CTRL_REG1 0xa3
+#define RK818_CHRG_CTRL_REG2 0xa4
+#define RK818_CHRG_CTRL_REG3 0xa5
+#define RK818_BAT_CTRL_REG 0xa6
+#define RK818_BAT_HTS_TS1_REG 0xa8
+#define RK818_BAT_LTS_TS1_REG 0xa9
+#define RK818_BAT_HTS_TS2_REG 0xaa
+#define RK818_BAT_LTS_TS2_REG 0xab
+#define RK818_TS_CTRL_REG 0xac
+#define RK818_ADC_CTRL_REG 0xad
+#define RK818_ON_SOURCE_REG 0xae
+#define RK818_OFF_SOURCE_REG 0xaf
+#define RK818_GGCON_REG 0xb0
+#define RK818_GGSTS_REG 0xb1
+#define RK818_FRAME_SMP_INTERV_REG 0xb2
+#define RK818_AUTO_SLP_CUR_THR_REG 0xb3
+#define RK818_GASCNT_CAL_REG3 0xb4
+#define RK818_GASCNT_CAL_REG2 0xb5
+#define RK818_GASCNT_CAL_REG1 0xb6
+#define RK818_GASCNT_CAL_REG0 0xb7
+#define RK818_GASCNT3_REG 0xb8
+#define RK818_GASCNT2_REG 0xb9
+#define RK818_GASCNT1_REG 0xba
+#define RK818_GASCNT0_REG 0xbb
+#define RK818_BAT_CUR_AVG_REGH 0xbc
+#define RK818_BAT_CUR_AVG_REGL 0xbd
+#define RK818_TS1_ADC_REGH 0xbe
+#define RK818_TS1_ADC_REGL 0xbf
+#define RK818_TS2_ADC_REGH 0xc0
+#define RK818_TS2_ADC_REGL 0xc1
+#define RK818_BAT_OCV_REGH 0xc2
+#define RK818_BAT_OCV_REGL 0xc3
+#define RK818_BAT_VOL_REGH 0xc4
+#define RK818_BAT_VOL_REGL 0xc5
+#define RK818_RELAX_ENTRY_THRES_REGH 0xc6
+#define RK818_RELAX_ENTRY_THRES_REGL 0xc7
+#define RK818_RELAX_EXIT_THRES_REGH 0xc8
+#define RK818_RELAX_EXIT_THRES_REGL 0xc9
+#define RK818_RELAX_VOL1_REGH 0xca
+#define RK818_RELAX_VOL1_REGL 0xcb
+#define RK818_RELAX_VOL2_REGH 0xcc
+#define RK818_RELAX_VOL2_REGL 0xcd
+#define RK818_BAT_CUR_R_CALC_REGH 0xce
+#define RK818_BAT_CUR_R_CALC_REGL 0xcf
+#define RK818_BAT_VOL_R_CALC_REGH 0xd0
+#define RK818_BAT_VOL_R_CALC_REGL 0xd1
+#define RK818_CAL_OFFSET_REGH 0xd2
+#define RK818_CAL_OFFSET_REGL 0xd3
+#define RK818_NON_ACT_TIMER_CNT_REG 0xd4
+#define RK818_VCALIB0_REGH 0xd5
+#define RK818_VCALIB0_REGL 0xd6
+#define RK818_VCALIB1_REGH 0xd7
+#define RK818_VCALIB1_REGL 0xd8
+#define RK818_IOFFSET_REGH 0xdd
+#define RK818_IOFFSET_REGL 0xde
+#define RK818_SOC_REG 0xe0
+#define RK818_REMAIN_CAP_REG3 0xe1
+#define RK818_REMAIN_CAP_REG2 0xe2
+#define RK818_REMAIN_CAP_REG1 0xe3
+#define RK818_REMAIN_CAP_REG0 0xe4
+#define RK818_UPDAT_LEVE_REG 0xe5
+#define RK818_NEW_FCC_REG3 0xe6
+#define RK818_NEW_FCC_REG2 0xe7
+#define RK818_NEW_FCC_REG1 0xe8
+#define RK818_NEW_FCC_REG0 0xe9
+#define RK818_NON_ACT_TIMER_CNT_SAVE_REG 0xea
+#define RK818_OCV_VOL_VALID_REG 0xeb
+#define RK818_REBOOT_CNT_REG 0xec
+#define RK818_POFFSET_REG 0xed
+#define RK818_MISC_MARK_REG 0xee
+#define RK818_HALT_CNT_REG 0xef
+#define RK818_CALC_REST_REGH 0xf0
+#define RK818_CALC_REST_REGL 0xf1
+#define RK818_SAVE_DATA19 0xf2
#define RK818_H5V_EN BIT(0)
#define RK818_REF_RDY_CTRL BIT(1)
View Git Blame Copy Permalink